
Pi Fly
PashMohandes/Pi-Fly
Significant improvement to OBAL (Open Board Autopilot Linux)

4x8x8-LED Matrix Clock is an open-source printed circuit board by taulant0, from the taulant0/4x8x8-LED-Matrix-Clock repository on GitHub. It is a 2-layer board of 113 × 64.1 mm with 20 parts on 48 nets, routed with 155 tracks and 12 vias.
It is built around the SS12D07VG4. Its parts include 9 connectors, 3 switches, 2 resistors and 1 IC. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 1825967-1 | ArduinoMini:SW_1825967-1 | S1, S2 |
| 1 | ArduinoProMiniSimple | ArduinoMini:ArduinoProMiniCustom | U1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | LED1_IN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LED1_OUT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | LED2_IN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | LED2_OUT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | LED3_IN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | LED3_OUT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | LED4_IN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | LED4_OUT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J9 |
| 1 | SS12D07VG4 | ArduinoMini:SW_SS12D07VG4 | S3 |
The 19 most common of 20 parts.

PashMohandes/Pi-Fly
Significant improvement to OBAL (Open Board Autopilot Linux)


MeghanaM4/campfire-console
PCB Badges with TFT display, NFC module, lipo battery charging, and 6 programmable buttons

danielkluka/Diploma-Thesis
Design of a Secure Data Transmission System in NB-IoT Environment

SparkMakerspace/sectr-soldering-kit
This PCB was designed by the nerds at Spark Makerspace for use with Southeastern CT Robotics (SECTR) FLL teams in spring/summer 2023.

SparkMakerspace/summer_melt_badge_2022
This badge was designed for the 2022 Summer Melt at Spark Makerspace.

zacharesmer/monorail-con-badge
Design files and information for the monorail con badge

ZeshuLiu/SX-70-Mk2
把板子上的U+ U- GND VCC焊到usb线上,连接电脑后可以当作树莓派Pico开发板进行操作,上传代码的参见这里(树莓派官网)。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器(文件夹不需要),并且将gmain.py命名为…
It measures 113 × 64.1 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the SS12D07VG4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the taulant0/4x8x8-LED-Matrix-Clock repository on GitHub, at the commit this page was made from: the board is 4x8x8 LED Matrix Clock.kicad_pcb and its schematic 4x8x8 LED Matrix Clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask taulant0 before reusing the design.