

D lev main rounded
- Size
- 175.3 × 163.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 209
- Pads
- 525
- Tracks, vias
- 2,448, 382
- Pours
- 454
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Feb 2023
- Updated
- 17 Oct 2023
Overview
D lev main rounded is an open-source printed circuit board by wormyrocks, from the wormyrocks/d-lev-mini repository on GitHub. It is a 4-layer board of 175.3 × 163.3 mm with 144 parts on 209 nets, routed with 2,448 tracks and 382 vias.
It is built around the AMS1117-3.3, S8B-PH-SM4-TB and MMBT3904, with the S12B-PH-SM4-TB and S6B-PH-SM4-TB among its other parts. Its parts include 61 resistors, 22 capacitors, 9 switches, 5 connectors and 3 ICs.
Main components
5AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsS8B-PH-SM4-TB
-Wire To Board ConnectorJSTMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)S12B-PH-SM4-TB
-Wire To Board ConnectorJSTS6B-PH-SM4-TB
--25℃~+85℃ 1 100V 15.9mm 1x6P 2A 2mm 5.5mm 6 6P 8.6mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount, Right Angle Tin UL94V-0 - Wire To Board Connector ROHSJSTWire To Board Connector
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +28 |
| 18 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25 +2 |
| 17 | .01u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C6, C7, C8, C10, C11, C13, C14, C15, C16, C17, C18, C21, C22 +1 |
| 8 | RotaryEncoder_Switch | d-lev:PEC11S-929K | SW2, SW3, SW4, SW5, SW6, SW7, SW9, SW10 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R6, R7 |
| 5 | 100 | Resistor_SMD:R_0603_1608Metric | R34, R35, R50, R59, R61 |
| 4 | M3 Standoff | d-lev:SMTSO-M3 | H3, H4, H5, H6 |
| 4 | MountingHole_Pad | d-lev:SMTSO-M4 | H1, H2, H7, H8 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C12 |
| 2 | 110 | Resistor_SMD:R_0603_1608Metric | R31, R33 |
| 2 | 210 | Resistor_SMD:R_0603_1608Metric | R30, R32 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20 |
| 2 | S8B-PH-SM4-TB | d-lev:JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal | J2, J3 |
| 1 | .1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R60 |
| 1 | 10K | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | 1v2 | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 25LCxxx | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U2 |
| 1 | 2v5 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 3v3 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | AC608 | d-lev:ac608-toponly | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | GPIO_I2 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | GPIO_I3 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | GPIO_O2 | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | GPIO_O3 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | LCD-20X4B-noshield | d-lev:ERM2004-2 | DS1 |
| 1 | LCD_VSEL | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | d-lev:logo_full | G*** |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | S12B-PH-SM4-TB | d-lev:JST_PH_S12B-PH-SM4-TB_1x12-1MP_P2.00mm_Horizontal | J4 |
| 1 | S6B-PH-SM4-TB | d-lev:JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Tag-Connect TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J5 |
| 1 | VDD | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
More from wormyrocks/d-lev-mini
6- 4 layers125 × 50.1 mm

- 4 layers125 × 50.1 mm

- 4 layers175.3 × 163.3 mm

- 4 layers88.7 × 68.4 mm

- 2 layers65 × 60 mm

- 2 layers14.4 × 4.5 mm

Similar boards
- 4 layers100 × 100 mm

Hw alpha
Yexall/CPE-450.Capstone
Fall 24 - Winter 25 Cal Poly Capstone project by Haas Hooligans. This projects aims to build a machine monitoring system for the Cal Poly IME department.
171 parts - 2 layers126.9 × 92 mm

- 2 layers62 × 42 mm

JoystickPCB
WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project
21 parts1 - 4 layers63.5 × 51.5 mm

LoRa breakout
alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket
9 parts - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers67 × 98 mm

SJ-201-R6
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
235 parts113 - 4 layers72.6 × 170 mm

OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0
Questions
How big is the D lev main rounded PCB?
It measures 175.3 × 163.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the D lev main rounded use?
144 parts, built around the AMS1117-3.3, S8B-PH-SM4-TB, MMBT3904 and S12B-PH-SM4-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the D lev main rounded KiCad files?
From the wormyrocks/d-lev-mini repository on GitHub, at the commit this page was made from: the board is d-lev-main/d-lev-main-rounded.kicad_pcb and its schematic d-lev-afe/d-lev-afe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the D lev main rounded design in my own project?
Its repository states no licence, so its author keeps all rights: ask wormyrocks before reusing the design.