Skip to the content
2 layers28 × 111 mmHelper, the printed circuit board in 3D

A collection of PCBs aimed at supporting handwired dactyl-ish keyboards.

Size
28 × 111 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
48
Pads
289
Tracks, vias
326, 27
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
17 Jan 2023
Updated
26 Jun 2023

Overview

Helper is an open-source printed circuit board by wolfwood, from the wolfwood/handwire-helper repository on GitHub. It is a 2-layer board of 28 × 111 mm with 39 parts on 48 nets, routed with 326 tracks and 27 vias.

It is built around the 1N4148W. Its parts include 34 diodes and 2 connectors. It belongs with the keyboards and input boards of this library.

Main components

1

README

README.md

Handwire Helpers

A collection of PCBs aimed at supporting handwired dactyl-ish keyboards. The goal is faster, simpler assembly (by offloading the key matrix from the handwiring to the PCB) and flexibility in placement of keys and connectors.

Matrix PCBs

Handwire Helper

Supports 8 columns, 4 rows for the first six columns and 5 for the last 2 (thumb) columns. The first row is the pin towards the microcontroller connections (narrow side). On the MCU side there are 8 pins for the columns and 5 for the rows, with the final pin as an (unnecessary) ground.

The intent is to connect keyswitches to the PCB using hotswap sockets, soldered to ribbon cables with DuPont connectors on the other side, which can plug in to the header on the long side of the PCB.

This lets the keyspacing be determined by a 3D printed case, independent of the PCB, so that electronics can be reused as keyboard designs change. This also means that different switch types can be supported, without prior consideration in the PCB design.

The microcontroller can be similarly connected to this board by jumpers, allowing flexibility in case design, and in placement of the USB plug.

Version 0.1 has been successfully manufactured and functionality has been tested and verified.

Parts

39
QtyValueFootprintReferences
341N4148Whandy:Reversable_Diode_SOD-123_THTD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +18
1Conn_01x14_MaleConnector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_HorizontalJ2
1Conn_02x34_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x34_P2.54mm_HorizontalJ1

The 36 most common of 39 parts.

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 4 layers95.6 × 73.6 mmMathpad, the printed circuit board in 3D

    Mathpad

    Summa-Cogni/Mathpad

    A mathematical keypad for students and professionals

    93 parts243
  • 2 layers141.5 × 83 mmRolio, the printed circuit board in 3D

    Rolio

    MickiusMousius/Rolio46Keyboard

    A split wireless keyboard based on the Corne and Sofle

    110 parts236MIT
  • 6 layers160 × 100 mmAdrmu6layer, the printed circuit board in 3D

    Adrmu6layer

    marcoreps/ADRmu

    ADR1000 10V standard

    240 parts149
  • 2 layers99.1 × 90.7 mmBgkeeb, the printed circuit board in 3D

    Bgkeeb

    sadekbaroudi/bgkeeb

    This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

    108 parts108
  • 2 layers229.8 × 102.6 mmBw2, the printed circuit board in 3D

    Bw2

    hazels-garage/bad-wings

    Bad Wings

    107 parts107CC-BY-SA-4.0

Questions

How big is the Helper PCB?

It measures 28 × 111 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Helper use?

39 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Helper KiCad files?

From the wolfwood/handwire-helper repository on GitHub, at the commit this page was made from: the board is helper/helper.kicad_pcb and its schematic helper/helper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Helper design in my own project?

Its repository states no licence, so its author keeps all rights: ask wolfwood before reusing the design.