
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

A collection of PCBs aimed at supporting handwired dactyl-ish keyboards.
Helper is an open-source printed circuit board by wolfwood, from the wolfwood/handwire-helper repository on GitHub. It is a 2-layer board of 28 × 111 mm with 39 parts on 48 nets, routed with 326 tracks and 27 vias.
It is built around the 1N4148W. Its parts include 34 diodes and 2 connectors. It belongs with the keyboards and input boards of this library.
A collection of PCBs aimed at supporting handwired dactyl-ish keyboards. The goal is faster, simpler assembly (by offloading the key matrix from the handwiring to the PCB) and flexibility in placement of keys and connectors.
Supports 8 columns, 4 rows for the first six columns and 5 for the last 2 (thumb) columns. The first row is the pin towards the microcontroller connections (narrow side). On the MCU side there are 8 pins for the columns and 5 for the rows, with the final pin as an (unnecessary) ground.
The intent is to connect keyswitches to the PCB using hotswap sockets, soldered to ribbon cables with DuPont connectors on the other side, which can plug in to the header on the long side of the PCB.
This lets the keyspacing be determined by a 3D printed case, independent of the PCB, so that electronics can be reused as keyboard designs change. This also means that different switch types can be supported, without prior consideration in the PCB design.
The microcontroller can be similarly connected to this board by jumpers, allowing flexibility in case design, and in placement of the USB plug.
Version 0.1 has been successfully manufactured and functionality has been tested and verified.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 1N4148W | handy:Reversable_Diode_SOD-123_THT | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +18 |
| 1 | Conn_01x14_Male | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Horizontal | J2 |
| 1 | Conn_02x34_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x34_P2.54mm_Horizontal | J1 |
The 36 most common of 39 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 28 × 111 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wolfwood/handwire-helper repository on GitHub, at the commit this page was made from: the board is helper/helper.kicad_pcb and its schematic helper/helper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wolfwood before reusing the design.