Skip to the content
2 layers93 × 61 mmATMega328-LoRa Sol ADIO, the printed circuit board in 3D

ATMega328-LoRa Sol ADIO

winnieXY/ATMega328-LoRa-Sol-ADIO

General Purpose ATMega328P Solar PCB

Size
93 × 61 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
58
Pads
212
Tracks, vias
387, 38
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Jul 2022
Updated
19 Aug 2022

Overview

ATMega328-LoRa Sol ADIO is an open-source printed circuit board by winnieXY, from the winnieXY/ATMega328-LoRa-Sol-ADIO repository on GitHub. It is a 2-layer board of 93 × 61 mm with 50 parts on 58 nets, routed with 387 tracks and 38 vias.

It is built around the ATMEGA328P-AU, CH340G and DS3231MZ+, with the LP2985-33DBV, RFM95W-868S2 and B5817WS-TP among its other parts. Its parts include 16 capacitors, 8 resistors, 7 ICs, 7 connectors and 4 diodes. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

8

Parts

50
QtyValueFootprintReferences
422pF 50V C0GCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3, C15, C16
4B5817WS-TPDiode_SMD:D_SOD-323_HandSolderingD1, D2, D3, D4
32.2uF 10V X5RCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC9, C12, C13
2100kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2
210uF 10V X5RCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C4
210uF, NPO/X7RCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC10, C14
21MResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3, R5
2430kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4, R6
1100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7
110nF 10V X5RCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8
110nF 6.3V TaCapacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolderC5
110uH, 250mOhmInductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolderL1
112MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY1
118650Battery:BatteryHolder_MPD_BH-18650-PC2BT1
11M, 0.1%Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR7
11nF, NPOCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11
11uF 10V X5RCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6
1430k, 0,1%Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR8
18MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY2
1AIO/I2CConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ3
1AP1117-33Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1ATmega328P-APackage_QFP:TQFP-32_7x7mm_P0.8mmU6
1CH340GPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU2
1CR2032Battery:Battery_Panasonic_CR2032-VS1N_Vertical_CircularHolesBT2
1DS3231MPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU7
1External PowerConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1IRLML5203Package_TO_SOT_SMD:SOT-23Q1
1JumperJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1LP2985-3.3Package_TO_SOT_SMD:SOT-23-5U3
1RFM95W-868S2RF_Module:HOPERF_RFM9XW_SMDU4
1RXTX+PowerConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ5
1SMAConnector_Coaxial:SMA_Amphenol_901-144_VerticalJ6
1SPIConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ7
1SPV1040TTRdigikey-footprints:TSSOP-8_W4.4mmU5
1SolarConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ4
1Solar PoweredJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J1

Similar boards

  • 2 layers93 × 61 mmESP32-LoRa ADIO, the printed circuit board in 3D

    ESP32-LoRa ADIO

    winnieXY/ESP32-LoRa-ADIO

    General purpose ESP32 PCB

    30 parts
  • 2 layers72.7 × 114 mmWs 3.0, the printed circuit board in 3D

    Ws 3.0

    boanjo/myhome

    A collection of mysensors nodes, gateways and HW from my home

    57 parts4
  • 2 layers50.5 × 128.5 mmOpenThereminV45, the printed circuit board in 3D

    OpenThereminV45

    GaudiLabs/OpenThereminV4

    Open Source Theremin Instrument

    107 parts249GPL-3.0
  • 4 layers93.3 × 40.7 mmGarage133, the printed circuit board in 3D

    Garage133

    chl33/Garage133

    A DIY device for garage door automation

    60 parts1MIT
  • 4 layers50 × 80 mmHermes, the printed circuit board in 3D

    Hermes

    1337bowen/Strife

    75 partsMIT
  • 2 layers100 × 100 mmFront IO Panel, the printed circuit board in 3D

    Front IO Panel

    twfth9/Kenwood-Handset-Switch-PCB

    229 partsGPL-3.0
  • 2 layers100 × 100 mmRoundClock, the printed circuit board in 3D

    RoundClock

    cawapy/RoundClock

    KiCad schematics and PCB for building a VFD clock

    359 parts

Questions

How big is the ATMega328-LoRa Sol ADIO PCB?

It measures 93 × 61 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ATMega328-LoRa Sol ADIO use?

50 parts, built around the ATMEGA328P-AU, CH340G, DS3231MZ+ and LP2985-33DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ATMega328-LoRa Sol ADIO KiCad files?

From the winnieXY/ATMega328-LoRa-Sol-ADIO repository on GitHub, at the commit this page was made from: the board is ATMega328-LoRa-Sol-ADIO.kicad_pcb and its schematic ATMega328-LoRa-Sol-ADIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ATMega328-LoRa Sol ADIO design in my own project?

Its repository states no licence, so its author keeps all rights: ask winnieXY before reusing the design.