2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59
2 layers81.8 × 55.5 mm
ISS tracker PCB
WillDoesBuild/ISS-tracker6A physical ISS tracker that moves a model of the International Space Station around a globe using magnets
- Size
- 81.8 × 55.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 40
- Pads
- 67
- Tracks, vias
- 55, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Jul 2025
- Updated
- 25 Jul 2025
Overview
ISS tracker PCB is an open-source printed circuit board by WillDoesBuild, from the WillDoesBuild/ISS-tracker repository on GitHub. It is a 2-layer board of 81.8 × 55.5 mm with 14 parts on 40 nets, routed with 55 tracks and 0 vias.
It is built around the IRF540N. Its parts include 3 resistors, 2 diodes, 2 switches, 1 capacitor and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdISS-tracker
A physical ISS tracker that moves a model of the International Space Station around a globe using magnets. Uses an ESP32 to update the ISS location every 15 seconds from the Open Notify API. Here's a video about it! (https://youtu.be/nbEe-BCNutg)
This GitHub repo only serves to hold files. Please see the Instructable about it here! (https://www.instructables.com/DIY-International-Space-Station-Tracker/)
ISS tracker © 2025 by Will Dana is licensed under CC BY-NC-SA 4.0
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 1 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 5V | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | BT1 |
| 1 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Calibrate | A_Wills_Footprints:QTEATAK pushbutton | SW1 |
| 1 | ESP32-DEVKITC-32D | A_Wills_Footprints:FIXEDMODULE_ESP32-DEVKITC-32D | U1 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | LAMP_PARALLEL_LEDS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D2 |
| 1 | Lat_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M2 |
| 1 | Long_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | SW_Push | A_Wills_Footprints:QTEATAK pushbutton | SW2 |
| 1 | Touch_Terminal | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1 |
| 1 | WIFI_LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D1 |
Questions
How big is the ISS tracker PCB PCB?
It measures 81.8 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ISS tracker PCB use?
14 parts, built around the IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ISS tracker PCB KiCad files?
From the WillDoesBuild/ISS-tracker repository on GitHub, at the commit this page was made from: the board is PCB files/ISS tracker PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ISS tracker PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask WillDoesBuild before reusing the design.
Similar boards
- 2 layers124.5 × 77.5 mm
- 2 layers55 × 90.8 mm
- 2 layers73.7 × 61 mm
- 2 layers
- 4 layers147.8 × 77 mm
2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7 - 2 layers
PCB Layout
chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control
63 parts6 - 2 layers147.2 × 58.3 mm
Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT