

Keyboard
Keyboard PCB with KiCad
- Size
- 76.2 × 113.8 mm
- Copper layers
- 2
- Thickness
- 1.09 mm
- Parts
- 80
- Nets
- 77
- Pads
- 302
- Tracks, vias
- 779, 96
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Jul 2022
- Updated
- 20 Nov 2024
Overview
Keyboard is an open-source printed circuit board by wil92, from the wil92/keyboard-pcb repository on GitHub. It is a 2-layer board of 76.2 × 113.8 mm with 80 parts on 77 nets, routed with 779 tracks and 96 vias.
It is built around the STM32F103C6T6A and LD1117S33TR(MS). Its parts include 18 diodes, 17 switches, 16 capacitors, 11 resistors and 7 connectors. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
2STM32F103C6T6A
LQFP-48(7x7)-40℃~+85℃ 10KB 12bit 2V~3.6V 32 Bit 32KB 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)LD1117S33TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 3.3V Fixed Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdkeyboard-pcb
A compendium of project about DIY keyboards base on STM32 chips.
The gerber files are provided and you can use it to replicate the keyboard.
Also the 3D model for the keyboard is provided in the repository.
Keyboard Alphanum

This is the first keyboard I made. I decided to get an easy option where I can start my incursion on this work of keyboards. This keyboard could be used as a USB Hub and is a fun project to be made.
Keyboard Personal

This is a version of 75% keyboard (with some variations).
Keyboard Split
tbd
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | D_Small | Diode_SMD:D_SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D16, D17, D18 +1 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5, C6, C7, C8, C15 |
| 5 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R7, R8, R9, R10 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C9, C14, C16 |
| 3 | USB_A | common:USB_A_Molex_105057_Vertical | J5, J6, J7 |
| 2 | 20R | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 0 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.00u | SW4 |
| 1 | 1 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW7 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 2 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW11 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C12 |
| 1 | 3 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW14 |
| 1 | 32768MHz | Crystal:Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm | Y3 |
| 1 | 4 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW13 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 4R7 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 5 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW16 |
| 1 | 6 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW3 |
| 1 | 7 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW15 |
| 1 | 8 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW2 |
| 1 | 8MHz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1 |
| 1 | 9 | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW6 |
| 1 | HS8836A | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | LD1117S33TR | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D15 |
| 1 | NL | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW1 |
| 1 | Prog pings | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ST-Link | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | STM32F103C6T6A | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | UART | common:PJ320D | J8 |
| 1 | USB_B_Mini | common:USB_Micro-B_A01SB141B1-245 | J4 |
| 1 | div | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW5 |
| 1 | dot | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW8 |
| 1 | enter | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.00u_90deg | SW17 |
| 1 | mul | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW9 |
| 1 | plus | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.00u_90deg | SW10 |
| 1 | sub | Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW12 |
More from wil92/keyboard-pcb
2- 2 layers306.4 × 117.5 mm

- 2 layers68.1 × 43.8 mm

Similar boards
- 4 layers54.6 × 89.5 mm

Hdmi2rgb adapter
embeddedboys/hdmi2rgb_adapter
hdmi2rgb_adapter is a simple HDMI to RGB deserializer based on TFP401 (TI)
55 parts4MIT - 4 layers102.5 × 62 mm

Sensor Cell with Comms
Molly-M-Laugh/Senior-Final
A collection of documentation and files for our group's final senior design project
93 parts - 2 layers65 × 56 mm

- 2 layers100 × 100 mm

- 2 layers65 × 56 mm

- 2 layers

Robot MGR
rayvburn/diff_drive_mapping_robot
ROS driver for the Raspberry Pi based differential drive robot
95 parts27 - 4 layers111.8 × 80.8 mm

- 4 layers45.5 × 50 mm

Adapter
strfry/LG360VR
This about making the LG 360 VR Goggles usable with a normal DisplayPort outlet.
58 parts19
Questions
How big is the Keyboard PCB?
It measures 76.2 × 113.8 mm and has 2 copper layers, 1.09 mm thick.
What parts does the Keyboard use?
80 parts, built around the STM32F103C6T6A and LD1117S33TR(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the wil92/keyboard-pcb repository on GitHub, at the commit this page was made from: the board is keyboard-alphanum/keyboard.kicad_pcb and its schematic keyboard-alphanum/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask wil92 before reusing the design.