
Sensor Cell with Comms
Molly-M-Laugh/Senior-Final
A collection of documentation and files for our group's final senior design project

A collection of documentation and files for our group's final senior design project
Sensor Cell with Comms is an open-source printed circuit board by Molly-M-Laugh, from the Molly-M-Laugh/Senior-Final repository on GitHub. It is a 4-layer board of 102.5 × 62 mm with 93 parts on 68 nets, routed with 920 tracks and 185 vias.
It is built around the STM32F103C6T6A, TCAN337D and TMP75BID, with the FM24V05-G, SMAJ12CA and SMF20A among its other parts. Its parts include 31 resistors, 27 capacitors, 11 ICs, 7 diodes and 3 connectors. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Put some base organization, hardware files in general should be put into the overall hardware folder unless:
This folder includes our work on everything in our software stack. We have our code for our ESP32 handling BLE communication, IOS app code, our frontend website, and our backend api.
We use a third party library that has been included into our repository because it was the only way to upload our work to the phone that we are developing on without deploying it. The library is called Alamofire, it's used for HTTP communication in Swift. You can find it at Software/BLE-IOS/Alamofire
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R11, R12, R14, R17, R18, R20, R21, R22, R26, R27, R28, R29, R30 +3 |
| 9 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C19, C20, C21, C22, C23, C25, C26, C27 |
| 5 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C24 |
| 4 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R13, R31 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | TestPoint | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP1, TP2, TP3, TP4 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C13, C16 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R19 |
| 3 | TMP75B | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3, U4, U5 |
| 2 | .1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C12 |
| 2 | .22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C15 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 2 | 51k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R24 |
| 2 | 60 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
| 2 | SMAJ12CA | Diode_SMD:D_SMA | D1, D2 |
| 2 | SMF20A | Diode_SMD:D_SMF | D4, D6 |
| 2 | SMF5V0A | Diode_SMD:D_SMF | D3, D7 |
| 2 | TPS2421 | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U9, U11 |
| 1 | .1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 4.7n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 630 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | DSC6111B | Oscillator:Oscillator_SMD_SiT_PQFN-4Pin_2.0x1.6mm | Y1 |
| 1 | FM24V05 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | FreeIO | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP9 |
| 1 | INA3221 | footprintLib:PinHeader_1x08_P1.00mm_Vertical_addedMonitorLines | U6 |
| 1 | MCP2518FD-xQBB | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | MolexMicroFit3_1 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J1 |
| 1 | MolexMicroFit3_2 | Connector_Molex:Molex_Micro-Latch_53254-0370_1x03_P2.00mm_Horizontal | J2 |
| 1 | MolexMicroFit3_3 | Connector_Molex:Molex_Micro-Latch_53254-0370_1x03_P2.00mm_Horizontal | J3 |
| 1 | PC13LED | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP6 |
| 1 | Reset | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP5 |
| 1 | SMF36A | Diode_SMD:D_SMF | D5 |
| 1 | STM32F103C6T6 | footprintLib:PinHeader_1x20_P1.00mm_Verticalx2 | U1 |
| 1 | SWO | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP7 |
| 1 | TCAN337 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | TPS22950x | Package_TO_SOT_SMD:SOT-23-6 | U10 |
| 1 | Wake | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP8 |

Molly-M-Laugh/Senior-Final
A collection of documentation and files for our group's final senior design project

embeddedboys/hdmi2rgb_adapter
hdmi2rgb_adapter is a simple HDMI to RGB deserializer based on TFP401 (TI)


CGainsWorks/emb-multirail-smps
Compact multi-output switch-mode power supply in Altium: synchronous buck, boost and LDO stages on a 4-layer board, with loop compensation, thermal analysis and EMC pre-compliance.

Secoh/Electronics
Educational etudes related to electronics, schematics, PCB layout, etc.


nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.

OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

blonski3/ibm-modern-m-ssk
Decyzje projektowe i ich uzasadnienia: docs/HARDWAREDECISIONS.md; historia zmian: docs/CHANGELOG.md.
It measures 102.5 × 62 mm and has 4 copper layers, 1.6 mm thick.
93 parts, built around the STM32F103C6T6A, TCAN337D, TMP75BID and FM24V05-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Molly-M-Laugh/Senior-Final repository on GitHub, at the commit this page was made from: the board is Hardware/Circuits and PCB related/Sensor Cell with Comms/Sensor Cell with Comms.kicad_pcb and its schematic Hardware/Circuits and PCB related/Sensor Cell with Comms Rev2/CAN_REL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Molly-M-Laugh before reusing the design.