2 layers88.1 × 21.3 mm
LC simple
Secoh/Electronics
Educational etudes related to electronics, schematics, PCB layout, etc.
20 partsMIT
2 layers57.4 × 48.5 mm
Starter d11 rev2
Secoh/ElectronicsEducational etudes related to electronics, schematics, PCB layout, etc.
- Size
- 57.4 × 48.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 38
- Pads
- 164
- Tracks, vias
- 409, 12
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 May 2024
- Updated
- 30 Jun 2024
Overview
Starter d11 rev2 is an open-source printed circuit board by Secoh, from the Secoh/Electronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 57.4 × 48.5 mm with 52 parts on 38 nets, routed with 409 tracks and 12 vias.
It is built around the ATSAMD11C14A-SSN, MAX4230AXK and MC74VHC1GT14DF, with the MIC1555BM5, PRTR5V0U2X and SMF24A among its other parts. Its parts include 17 resistors, 13 capacitors, 7 connectors, 5 ICs and 5 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
7
ATSAMD11C14A-SSN
SOIC-14-40℃~+105℃ 1.62V~3.63V 10bit 12 12bit 16KB 32 Bit 48MHz 4KB ARM Cortex-M0+ Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MAX4230AXK
SC-70-5-40℃~+125℃ 1 10MHz 10V/us 1pA 200mA 50pA 70dB Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational AmplifierMaxim Integrated (Analog Devices)Operational AmplifierMC74VHC1GT14DF
SC-88A-55℃~+125℃ 1 2V~5.5V 40uA 5.5ns@5.5V,50pF 74VHC 8mA 8mA Power shutdown protection、Noise suppression function Schmitt trigger Tri-State SC-88A Inverters ROHSonsemiInverters
MIC1555BM5
SOT-23-5-40℃~+85℃ 2.7V~18V 350uA 5MHz SOT-23-5 Timers / CountersMicrochip TechnologyTimers / Counters
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
SMF24A
SOD-123FL-65℃~+150℃ 1 1uA 200W 24V 26.7V、29.5V 38.9V 5.1A TVS Unidirectional SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSHXY MOSFETESD And Surge Protection (TVS/ESD)SMF36A
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
README
README.mdElectronics
Educational etudes related to electronics, schematics, PCB layout, etc.
Fairly random collection of designs related to my hobbies, with backup in hidden agenda. Historic items are in PCB123 (private vendor-specific, incompatible with anything else); more recent work is KiCad and LtSpice.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R9, R11, R14, R17 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R10, R15 |
| 3 | 2.2µ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C13 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 2 | 1µ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 39 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 4.7n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J6 |
| 1 | 0.01µ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 0.1µ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 100µ | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 1Meg | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 1N4007 | Secoh:D_SOD-123F_hand_soldering | D2 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23_Handsoldering | T1 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | ATSAMD11C14A-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 1 | ECS-2520MV-xxx-xx | Secoh:ECS-2520MV | X1 |
| 1 | MAX4230 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U4 |
| 1 | MC74VHC1GT14 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | MIC1555 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U5 |
| 1 | MMBZ5222BLT1G | Package_TO_SOT_SMD:SOT-23_Handsoldering | D5 |
| 1 | PRTR5V0 | Package_TO_SOT_SMD:SOT-143_Handsoldering | D1 |
| 1 | Reset | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | SMF24A | Secoh:D_SOD-123F_hand_soldering | D4 |
| 1 | SMF36A | Secoh:D_SOD-123F_hand_soldering | D3 |
| 1 | SWD-5 | Connector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Vertical | J3 |
| 1 | TLV73333/SOT-23 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | USB | Secoh:pad_single_005x036in_for_USB_A | J1A |
| 1 | USB_A | Connector_USB:USB_A_Molex_48037-2200_Horizontal | J1 |
| 1 | out_3V3 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | out_5V0 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4 |
More from Secoh/Electronics
4- 2 layers60.7 × 38.1 mm
Z input
Secoh/Electronics
Educational etudes related to electronics, schematics, PCB layout, etc.
19 partsMIT - 2 layers38.1 × 38.1 mm
Switch
Secoh/Electronics
Educational etudes related to electronics, schematics, PCB layout, etc.
17 partsMIT - 2 layers11.4 × 8.6 mm
Swd-5
Secoh/Electronics
Educational etudes related to electronics, schematics, PCB layout, etc.
3 partsMIT
Similar boards
- 4 layers85.5 × 54.5 mm
- 4 layers100 × 80 mm
Emb multirail smps
CGainsWorks/emb-multirail-smps
Compact multi-output switch-mode power supply in Altium: synchronous buck, boost and LDO stages on a 4-layer board, with loop compensation, thermal analysis and EMC pre-compliance.
79 parts1MIT - 4 layers102.5 × 62 mm
Sensor Cell with Comms
Molly-M-Laugh/Senior-Final
A collection of documentation and files for our group's final senior design project
93 parts - 2 layers40 × 40 mm
- 4 layers72.5 × 87.3 mm
Mouse V1
great-houk/mouse-project
Contains all the relevant folders for the entire custom mouse project
138 parts158MIT - 2 layers39.1 × 50.1 mm
Case smd challenge
CASE-Association/smd-challenge
Our CASE branded SMD Challenge. Do you have what it takes to complete it?
31 parts1 - 2 layers36.6 × 39 mm
- 2 layers54.3 × 35.2 mm
Urumbu Stepper TMC2208
SeanP2001/Urumbu_USB_Stepper_Motor
A modular approach to prototyping machines that move in the FabLAB
16 parts1MIT
Questions
How big is the Starter d11 rev2 PCB?
It measures 57.4 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starter d11 rev2 use?
52 parts, built around the ATSAMD11C14A-SSN, MAX4230AXK, MC74VHC1GT14DF and MIC1555BM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starter d11 rev2 KiCad files?
From the Secoh/Electronics repository on GitHub, at the commit this page was made from: the board is MCU/D11/starter_d11_rev2/starter_d11_rev2.kicad_pcb and its schematic MCU/D11/starter_d11/starter_d11.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starter d11 rev2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).