Skip to the content
PCBKitNew board
TCAN337D, in 3D

TCAN337D

Texas Instruments

-40℃~+125℃ 1Mbps 2.5mA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHS

Extended
DatasheetJLCPCBLCSCti/TCAN337D
Category
CAN Transceivers
Package
SOIC-8
Pins
8

Overview

The TCAN337D is a CAN Transceiver made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1Mbps 2.5mA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (Interface_CAN_LIN:TCAN337, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 3,056 are in stock at JLCPCB (part C2860648). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

TXD1GND2VCC3RXD4FAULT5CANL6CANH7S8
Interface_CAN_LIN:TCAN337From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

8
Current - Supply
60mA
Data Rate
1Mbps
Features
Silent mode
Number of Channels
1
Operating Temperature
-40℃~+125℃
Quiescent Supply Current
2.5mA
Type
CAN Transceiver
Voltage - Supply
3V~3.6V

Order codes

1

Pinout

8
The pins of the TCAN337D
PinNameType
1TXDInput
2GNDPower in
3VCCPower in
4RXDTri-state
5FAULTOpen collector
6CANLInput/output
7CANHInput/output
8SInput

Open-source boards using it

All 9
  • 4 layers58.9 × 48.4 mmApppd, the printed circuit board in 3D

    Apppd

    chithigun23/ANUFS-APPPD

    An update to the Accelerator Pedal Position Plausibility Device to remain compliant with the use of a paddle shift system.

    103 parts
  • 4 layers80 × 80 mmTelemetry, the printed circuit board in 3D

    Telemetry

    chithigun23/ANUFS-Telemetry

    To use custom hardware to measure parameters and dynamics of an ICE Formula SAE car.

    159 parts
  • 2 layers82.5 × 49 mmObd2dash, the printed circuit board in 3D

    Obd2dash

    EthanPope07/obd2dash

    An ESP32-S3 CAN-to-BLE bridge for an iPad vehicle dashboard. The firmware discovers each ECU's supported current-data PIDs and forwards complete raw responses through a versioned BLE GATT stream.

    22 parts
  • 4 layers102.5 × 62 mmSensor Cell with Comms, the printed circuit board in 3D

    Sensor Cell with Comms

    Molly-M-Laugh/Senior-Final

    A collection of documentation and files for our group's final senior design project

    93 parts
  • 2 layersMacropad, the printed circuit board in 3D

    Macropad

    moonbeeper/moonpad

    109 partsMIT
  • 4 layers40 × 40 mmMoco pg4, the printed circuit board in 3D

    Moco pg4

    ziteh/moco

    PMSM/BLDC motor controller/driver PCBs

    101 parts24CERN-OHL-P-2.0
  • 4 layers40 × 40 mmZiteh moco moco sc1, the printed circuit board in 3D

    Ziteh moco moco sc1

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    118 parts1
  • 4 layers35.6 × 17.8 mmWaffle Mini v0, the printed circuit board in 3D

    Waffle Mini v0

    4n3m4i1/Industrial_Control_Dev_Boards

    MCU Development Boards for Deeply Embedded Industrial Control Applications

    48 partsBSD-3-Clause

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/TCAN337D" title="TCAN337D in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/TCAN337D.jpg" alt="TCAN337D" width="1200" height="900">
A picture that opens the part, for a README
[![TCAN337D](https://pcbkit.io/embed/parts/ti/TCAN337D.jpg?size=s)](https://pcbkit.io/parts/ti/TCAN337D)

Questions

Is there a KiCad symbol and footprint for the TCAN337D?

Yes. The symbol is Interface_CAN_LIN:TCAN337 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TCAN337D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TCAN337D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TCAN337D?

JLCPCB lists it as part C2860648, with 3,056 in stock; the sellers' links on this page open their listings.

What can replace the TCAN337D?

Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TCAN337D?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8