4 layers49 × 49 mm
4 layers49 × 49 mm
GLITCHING FMAW
wicware/multitool1Glitching tool with examples
- Size
- 49 × 49 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 85
- Pads
- 304
- Tracks, vias
- 614, 55
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Dec 2025
- Updated
- 27 Apr 2026
Overview
GLITCHING FMAW is an open-source printed circuit board by wicware, from the wicware/multitool repository on GitHub. It is a 4-layer board of 49 × 49 mm with 77 parts on 85 nets, routed with 614 tracks and 55 vias.
It is built around the RP2040, LM358 and MS9280, with the W25Q128JVSIQ, TLV76133DCY and YC124-FR-07270RL among its other parts. Its parts include 29 capacitors, 17 resistors, 7 connectors, 6 ICs and 5 diodes. It belongs with the RP2040 boards of this library.
Main components
8
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
MS9280
SSOP-28-208mil-40℃~+125℃ 0.3LSB 1 10 2.7V~5.5V 31.7mA 35MHz 35MHz 49dB External External、Built-in Input buffer、Bipolar input Parallel port Pipeline Yes SSOP-28-208mil Analog to Digital Converters (ADC) ROHSHangzhou Ruimeng TechAnalog To Digital Converters (ADC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
TLV76133DCY
SOT-223-40℃~+125℃ 1 1.6V@(1A) 16V 1A 3.3V 60dB@(1kHz) 60uA 60uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsYC124-FR-07270RL
0402x4270Ω 4 62.5mW 8 ±1% ±200ppm/℃ 0402x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C11, C12, C13, C14, C15, C16, C19, C20, C21, C22, C23, C24, C27, C28, C29 +1 |
| 5 | 47uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C5 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C25, C26 |
| 4 | 470 | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R27 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6 |
| 4 | MH | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R11, R15, R16 |
| 3 | C728722 | Resistor_SMD:R_Array_Concave_4x0402 | RN1, RN2, RN3 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R7, R10 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 8pF | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | SW_DIP_x01 | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | BOOT1, RST1 |
| 2 | TLV76133 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 10uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y1 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AIN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ANA1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ANA2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | ANA3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Fuse | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | GLITCH | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | GRE | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LM358 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MS9280 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U6 |
| 1 | ORA | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | PIN | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | YEL | LED_SMD:LED_0603_1608Metric | D1 |
Questions
How big is the GLITCHING FMAW PCB?
It measures 49 × 49 mm and has 4 copper layers, 1.6 mm thick.
What parts does the GLITCHING FMAW use?
77 parts, built around the RP2040, LM358, MS9280 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GLITCHING FMAW KiCad files?
From the wicware/multitool repository on GitHub, at the commit this page was made from: the board is 02-hardware/GLITCHING_FMAW.kicad_pcb and its schematic 02-hardware/GLITCHING_FMAW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GLITCHING FMAW design in my own project?
Its repository states no licence, so its author keeps all rights: ask wicware before reusing the design.
Similar boards
- 4 layers44.2 × 84.5 mm
- 4 layers60 × 95 mm
Devboard
tjclement/ecsc23-badge
This repo contains the hardware designs and firmware developed for the ECSC23 hardware challenge by Curious Supplies.
147 parts10 - 2 layers446.9 × 141.7 mm
- 4 layers76 × 50 mm
Wigglecam
jadenrhee/wigglecam-controller
RP2040 co-processor board for a 4-lens wigglegram camera: constant-current flash, controls, battery telemetry, Pi 5 I2C interface. 4-layer, DRC-clean, fab-ready.
105 parts - 4 layers100 × 100 mm
Pico Dev iCE
frohro/pico-dev-ice
This is a direct down conversion (DDC) HF transceiver & VNA using the Raspberry Pi Pico and the iCE40UP5K.
294 parts3 - 4 layers68.6 × 53.3 mm
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0