4 layers60 × 95 mm
Devboard
tjclement/ecsc23-badge
This repo contains the hardware designs and firmware developed for the ECSC23 hardware challenge by Curious Supplies.
147 parts10
4 layers44.2 × 84.5 mm
Bolt
tjclement/bolt16Documentation for the Curious Bolt hardware hacking multi-tool
- Size
- 44.2 × 84.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 83
- Pads
- 287
- Tracks, vias
- 807, 101
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Oct 2023
- Updated
- 1 Feb 2024
Overview
Bolt is an open-source printed circuit board by tjclement, from the tjclement/bolt repository on GitHub, published under the MIT licence. It is a 4-layer board of 44.2 × 84.5 mm with 78 parts on 83 nets, routed with 807 tracks and 101 vias.
It is built around the RP2040, COS722SR and MS9280, with the W25Q128JVSIQ, AMS1117-3.3 and AO3400 among its other parts. Its parts include 29 capacitors, 29 resistors, 6 ICs, 6 connectors and 3 diodes. It belongs with the sensors and measurement boards and the RP2040 boards of this library.
Main components
6
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
COS722SR
SOIC-8-1.05V~2.75V -40℃~+125℃ 10MHz 125dB 12nV/√Hz@1kHz 2 2.1V~5.5V 2.5pA 2.5pA 21mA 2uV/℃ 5mV 650uA 7.5V/us Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSCOSINEOperational Amplifier
MS9280
SSOP-28-208mil-40℃~+125℃ 0.3LSB 1 10 2.7V~5.5V 31.7mA 35MHz 35MHz 49dB External External、Built-in Input buffer、Bipolar input Parallel port Pipeline Yes SSOP-28-208mil Analog to Digital Converters (ADC) ROHSHangzhou Ruimeng TechAnalog To Digital Converters (ADC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AO3400
SOT-23-55℃~+150℃ 1 N-channel 1.05nF 1.4V 1.5W 28mΩ@10V 30V 5.8A 77pF N-Channel SOT-23 MOSFETs ROHSGOODWORKMOSFETs
README
README.mdA new tool to break stuff! ⚒️
The Curious Bolt is a security multi-tool for getting started with hardware hacking. It is simultaneously:
- a programmable crowbar voltage glitcher ⚡️
- an 8-channel logic analyzer 👩💻
- and a simple differential power analysis oscilloscope. 📉
How do you turn this on?
See the docs for how to set up and use your Bolt.
Acknowledgements
PulseView scope code by Jaroslav Kysela, extended to run in parallel with other functions by Joris Witteman (MIT License)
Software and hardware design by Joris Witteman for Curious Supplies (MIT License)
PCB art by ankhaneko.art for Curious Supplies
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6, C7, C10, C11, C12, C14, C19, C20, C21, C24, C25, C26, C27, C28 +2 |
| 13 | 270 | Resistor_SMD:R_0603_1608Metric | R10, R17, R18, R19, R20, R23, R24, R25, R26, R27, R28, R29, R30 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C13, C22, C29 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C17, C18 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R8, R31 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R7, R22 |
| 3 | 470 | Resistor_SMD:R_0603_1608Metric | R9, R13, R14 |
| 3 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left | J3, J4, J6 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R12, R21 |
| 2 | 27.4 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2, U4 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J5, J7 |
| 2 | LED YELLOW | LED_SMD:LED_0805_2012Metric | D2, D3 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 27 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | AO3400 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | COS722SR | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | LED RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LOGO | ENISA23_VG_PCB:VoltageGlitcher_F.Cu | G*** |
| 1 | MS9280 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U6 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | dnf | Resistor_SMD:R_0603_1608Metric | R6 |
Questions
How big is the Bolt PCB?
It measures 44.2 × 84.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Bolt use?
78 parts, built around the RP2040, COS722SR, MS9280 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bolt KiCad files?
From the tjclement/bolt repository on GitHub, at the commit this page was made from: the board is hardware/bolt/bolt.kicad_pcb and its schematic hardware/bolt/bolt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bolt design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers49 × 49 mm
- 4 layers49 × 49 mm
- 4 layers100 × 100 mm
Pico Dev iCE
frohro/pico-dev-ice
This is a direct down conversion (DDC) HF transceiver & VNA using the Raspberry Pi Pico and the iCE40UP5K.
294 parts3 - 2 layers78 × 60 mm
- 4 layers72.6 × 170 mm
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers352.5 × 120 mm
PyKey87
jpconstantineau/PyKey60
The PyKey60 is a custom programmable mechanical keyboard with a standard ANSI 60% keyboard layout compatible with any cases made for the GH60. The PyKey60 uses mechanical switches (Cherry MX type).
310 parts57 - 2 layers36 × 43 mm
Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0