
COS722SR
COSINEExtended
-1.05V~2.75V -40℃~+125℃ 10MHz 125dB 12nV/√Hz@1kHz 2 2.1V~5.5V 2.5pA 2.5pA 21mA 2uV/℃ 5mV 650uA 7.5V/us Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS
- Part id
- cosine/COS722SR
- Category
- Operational Amplifier
- Package
- SOIC-8
- Pins
- 8
- In stock
- 16,609 at JLCPCB (C693063)
- Used on
- 2 open-source boards
Overview
The COS722SR is an operational Amplifier made by COSINE in a SOIC-8 package with 8 pins. -1.05V~2.75V -40℃~+125℃ 10MHz 125dB 12nV/√Hz@1kHz 2 2.1V~5.5V 2.5pA 2.5pA 21mA 2uV/℃ 5mV 650uA 7.5V/us Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:COS2348SR, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 16,609 are in stock at JLCPCB (part C693063). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 2.5 V · +Vs to -Vs, recommended operating minimum · p. 3
- Supply, most
- 5.5 V · +Vs to -Vs, recommended operating maximum · p. 3
- Supply, absolute maximum
- 6 V · +Vs to -Vs, absolute maximum · p. 3
- Works from
- -40 °C · recommended operating ambient minimum · p. 3
- Works up to
- 85 °C · recommended operating ambient maximum · p. 3
- Junction, hottest
- 150 °C · junction temperature absolute maximum · p. 3
- Takes working
- 1.3 mA · sum of two amplifiers' typical quiescent currents, +VS=5V · p. 4
- A pin gives at most
- 10 mA · input current absolute maximum · p. 3
- Junction to air (SOP8)
- 155 K/W · junction-to-ambient thermal resistance · p. 3
What it is and has
7- Amplifiers
- 2 · p. 1
- Gain bandwidth product
- 10MHz · p. 1
- Slew rate
- 7.5V/µs · p. 1
- Input and output
- Rail-to-rail · p. 1
- Stability
- Unity gain stable · p. 1
- Phase reversal
- No phase reversal · p. 1
- Package options
- SOP8/MSOP8 · p. 1
Around it
3- cap 0.1μF
- between +Vs and GND; Ceramic, close to +Vs; single-supply bypass. · p. 6
- cap 0.1μF
- between +Vs and GND; Separate ceramic bypass capacitor for dual-supply operation, close to the part. · p. 6
- res 1 kΩ
- between OUT and capacitive load; RISO in series with the output when capacitive loading causes excessive peaking or overshoot; start at this value and adjust on the bench. · p. 5
Specifications
27| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Power Supply: +Vs to -Vs | max 6 V | 3 | |
| Input Current (2) | Input terminals are diode-clamped to the power-supply rails | max 10 mA | 3 |
| Storage Temperature Range | min -65 · max 150 °C | 3 | |
| Junction Temperature | max 150 °C | 3 | |
| Operating Temperature Range | min -40 · max 125 °C | 3 | |
| ESD Susceptibility, HBM | max 4000 V | 3 | |
| Package Thermal Resistance, RθJA (Juntion-to-ambient) RθJA | COS722SR, SOP8 | typ 155 °C/W | 3 |
| DC Supply Voltage | min 2.5 · max 5.5 V | 3 | |
| Operating Ambient Temperature | min -40 · max 85 °C | 3 | |
| Input Offset Voltage VOS | +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2; values printed as ± | typ 0.6 · max 5 mV | 4 |
| Input Offset Voltage Drift ΔVOS/ΔT | +VS=+5V, -VS=0, VCM=VS/2, RL=10kΩ to VS/2; -40 to 125°C; value printed as ± | typ 2 uV/°C | 4 |
| Input Bias Current IB | +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2; value printed as ± | typ 2.5 pA | 4 |
| Input Offset Current IOS | +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2; value printed as ± | typ 2.5 pA | 4 |
| Common-Mode Voltage Range VCM | VS = 5.5V; -VS=0, TA=+25°C, RL=10kΩ to VS/2 | min -0.1 · max 5.6 V | 4 |
| Common-Mode Rejection Ratio CMRR | VCM =0.1V to 4.9V; +VS=+5V, -VS=0, TA=+25°C, RL=10kΩ to VS/2 | typ 125 dB | 4 |
| Open-Loop Voltage Gain AOL | VO=0.2V to 4.8V; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2 | typ 120 dB | 4 |
| Output Voltage Swing from Rail | RL=100kΩ; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C | typ 1 mV | 4 |
| Output Voltage Swing from Rail | RL=10kΩ; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C | typ 8 mV | 4 |
| Output Voltage Swing from Rail | RL=2kΩ; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C | typ 40 mV | 4 |
| Short-Circuit Current ISR | Sourcing; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C | typ 21 mA | 4 |
| Short-Circuit Current ISK | Sinking; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C | typ 22 mA | 4 |
| Operating Voltage Range | TA=+25°C | min 2.5 · max 5.5 V | 4 |
| Power Supply Rejection Ratio PSRR | VS = +2.5V to +5.5V; -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2 | min 80 · typ 100 dB | 4 |
| Quiescent Current / Amplifier IQ | +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2 | typ 650 uA | 4 |
| Gain Bandwidth Product GBWP | G=+1; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2 | typ 10 MHz | 4 |
| Slew Rate SR | G = +1 , 2V Output Step; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2 | typ 7.5 V/us | 4 |
| Voltage Noise Density en | f=1kHz; +VS=+5V, -VS=0, VCM=VS/2, TA=+25°C, RL=10kΩ to VS/2 | typ 12 nV/√Hz | 4 |
Ordering codes, by the datasheet
2- COS722SR
- SOP-8 · Dual amplifier; Tape and Reel, 4000; marking COS722SR · p. 2
- COS722MR
- MSOP-8 · Dual amplifier; Tape and Reel, 3000; marking COS722MR · p. 2
Open-source boards using it
2- 4 layers44.2 × 84.5 mm

- 4 layers60 × 95 mm

Devboard
tjclement/ecsc23-badge
This repo contains the hardware designs and firmware developed for the ECSC23 hardware challenge by Curious Supplies.
147 parts10
Parts like it
8LM358D
SOIC-8-16V~16V 0℃~+70℃ 2 3V~32V 40mA 45nA 5nA 700uA 70dB 7mV 7uV/℃ Built-in compensation、ESD protection SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierLM2904D
SOIC-8-16V~16V -40℃~+105℃ 1.5mA 2 2mV 3V~32V 40mA 45nA 50nA 70dB 7uV/℃ Built-in compensation、ESD protection SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierNE5532D
SOIC-8-15V~15V 0℃~+70℃ 100dB 10MHz 10nA 16mA 1uA 2 38mA 500uV 5nV/√Hz@1kHz 5uV/℃ 9V/us Built-in compensation SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358D
SOIC-8-16V~16V 0℃~+70℃ 2 20mA 20nA 2nA 300V/ms 3V~32V 3mV 40nV/√Hz@1kHz 700kHz 700uA 7uV/℃ 99dB EMI filtering/RF suppression SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358DT
SO-80℃~+70℃ 1.1MHz 1.2mA 2 200nA 30nA 30uV/℃ 3V~30V 40mA 55nV/√Hz@1kHz 600V/ms 7mV 85dB Built-in compensation SO-8 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierTLV9062ID
SOIC-8-40℃~+125℃ 0.05pA 0.5pA 1.6mV 1.8V~5.5V 103dB 10MHz 10nV/√Hz@1kHz 2 50mA 530nV/℃ 538uA 6.5V/us Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM2904DT
SOIC-8-40℃~+125℃ 1.1MHz 10pA/℃ 2 20nA 2mV 2nA 30V 3V~30V 40mA 55nV/√Hz@1kHz 600V/ms 700uA 7uV/℃ 85dB SOIC-8 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierTSV912IDT
SO-8-40℃~+125℃ 10pA 1pA 2 2.5V~5.5V 21nV/√Hz@10kHz 35mA 4.5V/us 4.5mV 5uV/℃ 820uA 82dB 8MHz Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output SO-8 Operational Amplifier ROHSSTMicroelectronicsOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the COS722SR?
Yes. The symbol is EasyEDA_Cloud:COS2348SR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the COS722SR?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the COS722SR datasheet?
COSINE publishes it: the Datasheet link on this page opens it.
Where can I order the COS722SR?
JLCPCB lists it as part C693063, with 16,609 in stock; the sellers' links on this page open their listings.
What can replace the COS722SR?
Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the COS722SR?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.