

Pellet burner
- Size
- 100 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 171
- Nets
- 124
- Pads
- 541
- Tracks, vias
- 954, 119
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Jan 2026
- Updated
- 6 Jan 2026
Overview
Pellet burner is an open-source printed circuit board by Weyla, from the Weyla/pellet-burner-pcb repository on GitHub. It is a 4-layer board of 100 × 80 mm with 171 parts on 124 nets, routed with 954 tracks and 119 vias.
It is built around the SN74LV1T34DBV, ESP32-S3-WROOM-1-N8 and AP63203WU, with the AP63205WU, MCP3208-BI/P and IRLML6344TRPBF among its other parts. Its parts include 50 resistors, 38 connectors, 31 capacitors, 19 diodes and 15 ICs. It belongs with the ESP32 boards of this library.
Main components
12SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersAP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersMCP3208-BI/P
PDIP-16-40℃~+85℃ 0.5LSB 100kHz 12 1LSB 1MHz、2MHz 2.7V~5.5V 500nA 8 External External Multiplexers、Bipolar input Not supported SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)IRLML6344TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC 650pF SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesBZT52C5V1
SOD-1231 Independent 130Ω 2uA 4.85V~5.36V 5.1V 500mW SOD-123 Zener Diodes ROHSMDDZener DiodesBAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky DiodesSTPS5L60U
SMB(DO-214AA)1 Independent 220uA@60V 520mV@5A 5A 60V 90A SMB(DO-214AA) Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesSRP5030T-6R8M
SMD,5.7x5.2mm4.3A 4A 6.8uH 76.2mΩ ±20% SMD,5.7x5.2mm Power Inductors ROHSBournsPower InductorsUSB4110-GF-A
SMD-40℃~+85℃ 1 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
171| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100 nF | Capacitor_SMD:C_0805_2012Metric | C10, C11, C12, C13, C14, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 +8 |
| 17 | 10 kOhm | Resistor_SMD:R_0805_2012Metric | R11, R12, R14, R15, R19, R20, R23, R24, R34, R39, R40, R42, R44, R45, R49, R53 +1 |
| 10 | 680 Ohm | Resistor_SMD:R_0805_2012Metric | R1, R4, R7, R10, R13, R16, R18, R25, R27, R29 |
| 10 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U2, U5, U6, U7, U9, U11, U13, U21, U22, U23 |
| 8 | 100 kOhm | Resistor_SMD:R_0805_2012Metric | R2, R8, R9, R17, R26, R28, R30, R58 |
| 8 | IRLML6344TRPBF | Package_TO_SOT_SMD:TSOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | SS34 | Diode_SMD:D_SMA | D1, D2, D3, D4, D5, D18, D19, D20 |
| 8 | ~ | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J21, J22, J23, J24, J25, J26, J27, J28 |
| 8 | ~ | components:JST_XH_1x2_vertical | J3, J4, J5, J8, J9, J10, J11, J12 |
| 6 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J16, J17, J19, J20, J30, J33 |
| 6 | ~ | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | J1, J2, J15, J18, J29, J34 |
| 5 | ~ | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J38, J41, J42, U8, U14 |
| 4 | 22 uF 25V | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7, C8 |
| 4 | 4.7 kOhm | Resistor_SMD:R_0805_2012Metric | R35, R36, R46, R47 |
| 4 | BZT52C5V1 | Diode_SMD:D_SOD-123F | D7, D8, D11, D12 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D13, D14, D15 |
| 2 | 10 uF 50V | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | 2.2 kOhm | Resistor_SMD:R_0805_2012Metric | R37, R38 |
| 2 | 5.1 kOhm | Resistor_SMD:R_0805_2012Metric | R21, R22 |
| 2 | BAT54 | Package_TO_SOT_SMD:SOT-23-3 | D6, D10 |
| 2 | Polyfuse | Fuse:Fuse_1210_3225Metric | F2, F3 |
| 2 | STPS5L60U | Diode_SMD:D_SMB | D9, D21 |
| 2 | SW_Push | components:3x4x2 switch | SW1, SW2 |
| 2 | dnp | Resistor_SMD:R_0805_2012Metric | R41, R43 |
| 2 | ~ | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J14, J37 |
| 1 | 1 uF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 180 Ohm | Resistor_SMD:R_0805_2012Metric | R32 |
| 1 | 2.2 kOhm | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 20 Ohm | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | 24V Power input | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |
| 1 | 430 Ohm 0.1% | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 5.1 kOhm | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 5v | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J13 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1U | U3 |
| 1 | MAX31865xAP | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | U15 |
| 1 | MCP3208 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U20 |
| 1 | SRP5030T-6R8M | components:SRP5030T | L2 |
| 1 | SRR5228A-2R2Y | components:SRR5228A | L1 |
| 1 | USB4110-GF-A | components:USB4110GFA | J7 |
The 167 most common of 171 parts.
Similar boards
- 2 layers90.9 × 33.5 mm

- 2 layers70 × 30 mm

Pump controller
aspinozaxxx-lab/zigbee_pump
Прошивка управляет насосом через аппаратно выбранный Zigbee Router либо прямое подключение Wi-Fi/MQTT: насос включается вручную или на заданное время, а импульсы расходомера превращаются в литры и текущий расход.
20 parts - 2 layers165.6 × 94 mm

ECK-88
BryanOrabutt/ECK-88
This project is an attempt to recreate the Intel ECK-88 development kit using KiCAD software to recreate the board and schematics.
181 partsMIT - 4 layers50 × 40 mm

RAPS-5 V1
itsTasos/RAPS-5
Dual-input power module with independent LiPo protection, buck conversion and ideal-diode OR-ing.
96 parts - 4 layers64 × 64 mm

Flight computer
daniel360kim/ember
Thrust vector control rocket via differentiable simulation and reinforcement learning.
96 parts - 6 layers84 × 98 mm

FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142 - 2 layers75.2 × 83.6 mm

- 2 layers100 × 102 mm

Esp32-c3-dip controller
haya1010/esp32-c3-safe-dip-led-controller
Protected ESP32-C3 2.54 mm DIP controller with USB-C and 3-channel 5/12/24 V LED PWM outputs
63 parts
Questions
How big is the Pellet burner PCB?
It measures 100 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pellet burner use?
171 parts, built around the SN74LV1T34DBV, ESP32-S3-WROOM-1-N8, AP63203WU and AP63205WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pellet burner KiCad files?
From the Weyla/pellet-burner-pcb repository on GitHub, at the commit this page was made from: the board is pellet_burner.kicad_pcb and its schematic pellet_burner.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pellet burner design in my own project?
Its repository states no licence, so its author keeps all rights: ask Weyla before reusing the design.