
MM58167-ISA RTC
jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.

The WiFi-VirtDisk is a network-based storage solution that replaces or supplements the classic SD card approach. The hardware consists of an ESP8266 (D1 mini), which is connected to the SPI port (SD card).
WiFi VirtDisk WemosD1mini is an open-source printed circuit board by welzel-online, from the welzel-online/WiFi-VirtDisk repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board with 14 parts on 25 nets.
It is built around the WEMOS D1 MINI, 2N2222A and 2N2907A. Its parts include 8 resistors, 3 transistors, 2 connectors and 1 IC. It belongs with the radio and wireless and retro computing and games boards and the ESP8266 boards of this library.
The WiFi-VirtDisk is a network-based storage solution that replaces or supplements the classic SD card approach. The hardware consists of an ESP8266 (D1 mini), which is connected to the SPI port (SD card).
Unlike SD card support, the WiFi-VirtDisk relies on its own SPI protocol, which is fully implemented in the ESP8266. This communicates directly with the IOS of the Z80-MBC2, which I have also adapted. There, the user can flexibly choose whether they want to work with a local SD card or via the WiFi-VirtDisk. The ESP8266 then communicates via WLAN to a server programme that runs on both Windows 10/11 and Linux.
Technical overview:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R5, R6 |
| 2 | 2N2222A | Package_TO_SOT_THT:TO-92 | Q2, Q3 |
| 2 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R7 |
| 2 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R8 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2N2907A | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | SD_MOD | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
| 1 | Z80_MOD | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |

jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.


MCMarcusAntony/iBOLIT-1.5
Tools added to this board are: - Logic probe included on Top three pin connector. - Lighting and acoustic signals to identify HIGH and LOW status.

morris6/Modulo-Two_ARINC-429_Converter
Converting a Modulo-Two Serial Stream to Arinc-429 Serial Words

electricalhog/Discrete_Opamp
Off-the-shelve based FET input opamp designed in ECE5204 and brought to PCB

UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources

daeln-fln-ifsc/uc3525
Repositório referente ao projeto do uc3525 para uso em sala de aula
14 parts, built around the WEMOS D1 MINI, 2N2222A and 2N2907A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the welzel-online/WiFi-VirtDisk repository on GitHub, at the commit this page was made from: the board is WiFi-VirtDisk ESP8266/schematics/WiFi-VirtDisk-WemosD1mini.kicad_pcb and its schematic WiFi-VirtDisk ESP8266/schematics/WiFi-VirtDisk-WemosD1mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).