2 layers175 × 95 mm
Portail jc
f1iwq2/Came_IWQ
Carte de remplacement pour portail CAME ZBX6N/7N - A base d'arduino nano
115 parts
2 layers100 × 100 mm
Converting a Modulo-Two Serial Stream to Arinc-429 Serial Words
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 79
- Pads
- 294
- Tracks, vias
- 532, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Nov 2023
- Updated
- 27 Nov 2023
Overview
Mod2Arinc is an open-source printed circuit board by morris6, from the morris6/Modulo-Two_ARINC-429_Converter repository on GitHub. It is a 2-layer board of 100 × 100 mm with 105 parts on 79 nets, routed with 532 tracks and 0 vias.
It is built around the ATMEGA328-PU, R-78B1.5-1.0 and TL082, with the BS170, 2N2222A and 2N2907A among its other parts. Its parts include 43 resistors, 22 capacitors, 12 transistors, 5 ICs and 5 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)R-78B1.5-1.0
SIP,11.5x8.5mmIsolated Power ModulesRECOM Power
TL082
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 13V/us 2 2.5nA 36V 3MHz 3mV 85dB Short-Circuit Protection SOP-8 FET Input Amplifiers ROHSGcoreOperational Amplifier
BS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETs
2N2222A
TO-92-55℃~+150℃ 1 NPN 100MHz 100nA 400 40V 5V 600mA 600mV 625mW NPN TO-92 Bipolar (BJT) ROHSSlkorBipolar (BJT)2N2907A
TO-921 PNP 1.6V 100 100nA 200MHz 5V 600mA 60V 625mW PNP TO-92 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
1.5KE39CA
DO-27ESD And Surge Protection (TVS/ESD)SUNMATE Elec
G5Q-1A
Miniature Power RelayOmronUncategorised
README
README.mdModulo-Two to ARINC-429 converter
Converting a Modulo-Two Serial Stream to Arinc-429 Serial Words.
What's it for?
The Modulo-Two Serial Stream originates from a rather obsolete (around 1970 style) airborn High Frequency Communication Radio Control Panel. This panel is installed in the cockpit and it controls a High Frequency Transceiver located in an aircrafts electronic compartment. The panel is a Collins Controller 514A-4 and the transceiver a Collins HF Receiver Transmitter HFS-700.
Why do we need one?
We want this panel to control a somewhat less obsolete High Frequency Communication Transceiver (1990 to 2010?) that requires Arinc-429 standard control signals.
OK, show us.
The converter is an electronic device build in a box. Signals from the panel go in, and the output is routed to the transceiver. The device consists of an electronic circuit board and connectors. On this board a microcontroller works together with some support circuits to transform the incoming serial stream in Arinc-429 serial words.
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R16, R17, R18, R19, R21, R22, R23, R24 |
| 9 | u1 | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C5, C6, C8, C9, C11, C12, C13, C20, C21 |
| 8 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R10, R11, R33, R34, R35, R73 |
| 8 | BS170 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 6 | 3.2 | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4, H5, H6 |
| 6 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R25, R26, R36, R37, R74 |
| 4 | 36 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R29, R30, R31, R32 |
| 4 | 470p | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C14, C15, C16, C17 |
| 3 | 0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R71, R72, R75 |
| 3 | 10u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C7 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R13 |
| 2 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C18, C19 |
| 2 | 12k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20, R77 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2 |
| 2 | 22p | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 2N2222A | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q9, Q11 |
| 2 | 2N2907A | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q10, Q12 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1, F2 |
| 1 | 1.5KE39CA | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | TVS1 |
| 1 | 10uH | Inductor_THT:L_Radial_D7.5mm_P3.50mm_Fastron_07P | L1 |
| 1 | 16 MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | 18k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R27 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C10 |
| 1 | 270 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R78 |
| 1 | 390 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R76 |
| 1 | 3k3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 3n3 | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C22 |
| 1 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R28 |
| 1 | 514A | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_6-G-3.81_1x06_P3.81mm_Vertical | J1 |
| 1 | 5k6 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | 82 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 820 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | AMBER | LED_THT:LED_D5.0mm | D3 |
| 1 | ATMEGA328P | Package_DIP:DIP-28_W7.62mm_Socket | U3 |
| 1 | DPBW03F-015 | Converter_DCDC:Converter_DCDC_TRACO_TMR-xxxx_THT | U4 |
| 1 | G5Q-1A | Relay_THT:Relay_SPST_Omron-G5Q-1A | K1 |
| 1 | GREEN | LED_THT:LED_D5.0mm | D4 |
| 1 | HFS-700 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_6-G-3.81_1x06_P3.81mm_Vertical | J5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | R-78B15 | Converter_DCDC:Converter_DCDC_RECOM_R-78B-2.0_THT | U1 |
| 1 | SERIAL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | SUPPLY | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_6-G-3.81_1x06_P3.81mm_Vertical | J2 |
| 1 | TEST | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J4 |
| 1 | TL082 | Package_DIP:DIP-8_W7.62mm | U5 |
Similar boards
- 2 layers89.3 × 50 mm
MM58167-ISA RTC
jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.
29 parts9 - 2 layers97.6 × 76.8 mm
- 2 layers
WiFi VirtDisk WemosD1mini
welzel-online/WiFi-VirtDisk
The WiFi-VirtDisk is a network-based storage solution that replaces or supplements the classic SD card approach. The hardware consists of an ESP8266 (D1 mini), which is connected to the SPI port (SD card).
14 parts5GPL-2.0 - 2 layers59.7 × 62.2 mm
IBolit ngo kicad
MCMarcusAntony/iBOLIT-1.5
Tools added to this board are: - Logic probe included on Top three pin connector. - Lighting and acoustic signals to identify HIGH and LOW status.
38 parts2 - 2 layers30 × 13 mm
Discrete Opamp
electricalhog/Discrete_Opamp
Off-the-shelve based FET input opamp designed in ECE5204 and brought to PCB
28 parts - 2 layers77.6 × 78.1 mm
SCRController
UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
43 parts1 - 2 layers
Questions
How big is the Mod2Arinc PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mod2Arinc use?
105 parts, built around the ATMEGA328-PU, R-78B1.5-1.0, TL082 and BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mod2Arinc KiCad files?
From the morris6/Modulo-Two_ARINC-429_Converter repository on GitHub, at the commit this page was made from: the board is Mod2ArincProject/Mod2Arinc.kicad_pcb and its schematic Mod2ArincProject/Mod2Arinc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mod2Arinc design in my own project?
Its repository states no licence, so its author keeps all rights: ask morris6 before reusing the design.