
Sync ope
cyberboy666/sync_ope
effect send + sync restoring circuit - adapted from a gael jaton design

LM1881 based separator for OSD
OSD sync is an open-source printed circuit board by wdomski, from the wdomski/OSD-KiCAD repository on GitHub, published under the MIT licence. It is a 2-layer board of 20.3 × 19.1 mm with 12 parts on 13 nets, routed with 103 tracks and 4 vias.
It is built around the LM1881. Its parts include 3 resistors, 3 ICs, 2 capacitors, 2 connectors and 1 diode.
LM1881 based separator for OSD
This example project shows implementation of OSD (on screen device) based on LM1881.
The project was created with KiCAD.
Some more detail about the project and usage with RP2040 Raspberry Pi microcontroller can be found on my blog On-screen Display with Raspberry Pi Pico.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Library:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 100 | Library:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 120 | Library:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 1N4148 | Library:D_1206_3216Metric | D1 |
| 1 | 1k | Library:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 680k | Library:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_01x03 | Library:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Library:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | LM1881 | Library:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LM1881 | Library:DIP-8_W7.62mm | U2 |
| 1 | logo | Library:LOGO_1200 | U3 |

cyberboy666/sync_ope
effect send + sync restoring circuit - adapted from a gael jaton design


rattboi/extron-scart-adapter
Cheap adapter for (some) extron matrix switchers to allow SCART input with no cables

jamvanderloeff/RGB-to-NTSC
Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using




yoonjustin/WinchesterPCB
Open source JAMMA supergun project. KiCAD PCB design files
It measures 20.3 × 19.1 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the LM1881. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wdomski/OSD-KiCAD repository on GitHub, at the commit this page was made from: the board is OSD_sync.kicad_pcb and its schematic OSD_sync.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).