Skip to the content
2 layers30 × 60 mmBuoy pcb, the printed circuit board in 3D

Contains the KiCad files for the pcb.

Size
30 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
44
Pads
127
Tracks, vias
126, 23
Pours
8
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Aug 2025
Updated
5 Aug 2025

Overview

Buoy pcb is an open-source printed circuit board by wbarne12, from the wbarne12/buoy_pcb repository on GitHub. It is a 2-layer board of 30 × 60 mm with 30 parts on 44 nets, routed with 126 tracks and 23 vias.

It is built around the BQ25185DLHR, ULN2003ADRG and USB4175-GF-0230-C, with the BS170 and SS14 among its other parts. Its parts include 10 resistors, 7 capacitors, 7 connectors, 3 ICs and 1 diode.

Main components

5

Parts

30
QtyValueFootprintReferences
522uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C3, C4, C5, C6
422kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR5, R9, R10, R11
2100kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR6, R7
210uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C7
2Conn_01x07Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ6, J7
2USB4175-GF-0230-Cfootprints:USB4175GF0230CJ2, J5
110kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1
113kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2
11uHInductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolderL1
1300Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3
1732kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR8
1BQ25185DLHRfootprints:SON40P220X200X80-11NIC1
1BS170Package_TO_SOT_THT:TO-92_InlineQ1
1Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ3
1Conn_01x05Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_VerticalJ1
1Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ4
1SS14Diode_SMD:D_1206_3216MetricD1
1TPS61023DRLTfootprints:SOTFL50P160X60-6NIC2
1ULN2003ADRfootprints:SOIC127P600X175-16NIC3

Similar boards

  • 4 layers100 × 100 mmEc30-tee, the printed circuit board in 3D

    Ec30-tee

    justinpirie/ec30

    Onan EC30 Tee Board with ESP32 Control

    167 partsApache-2.0
  • 4 layers98.8 × 69.8 mmSparkGapX4, the printed circuit board in 3D

    SparkGapX4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 2 layers45.5 × 46 mmChipsat v1, the printed circuit board in 3D

    Chipsat v1

    noellayang/chipsat-v1

    Custom ESP32-C3 power-management testbed for small satellite firmware experiments

    69 parts
  • 4 layersInfiniteRecon, the printed circuit board in 3D

    InfiniteRecon

    Rivercraft911/InfiniteRecon

    A lot coming soon....

    128 parts
  • 2 layers114 × 89 mmAyn-4b, the printed circuit board in 3D

    Ayn-4b

    afiskon/ayn-4b

    Portable QRP CW Transceiver

    278 parts7MIT
  • 2 layers30 × 60 mmSplitFlapDriverATtiny1616V4, the printed circuit board in 3D

    SplitFlapDriverATtiny1616V4

    adamgmakes/SplitFlapDisplay

    A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.

    25 parts190
  • 4 layers85 × 56 mmRadioberry LPF V1.3, the printed circuit board in 3D

    Radioberry LPF V1.3

    pa3gsb/Radioberry-2.x-extensions

    Hardware extensions to the Radioberry Ham Radio

    116 parts24
  • 4 layers189.4 × 59.1 mmFlippyDriver, the printed circuit board in 3D

    FlippyDriver

    NietoSkunk/FlippyDriver

    Driver board for Luminator MAX3000 Flip Dot Panels

    344 parts10MIT

Questions

How big is the Buoy pcb PCB?

It measures 30 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Buoy pcb use?

30 parts, built around the BQ25185DLHR, ULN2003ADRG, USB4175-GF-0230-C and BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buoy pcb KiCad files?

From the wbarne12/buoy_pcb repository on GitHub, at the commit this page was made from: the board is Buoy PCB.kicad_pcb and its schematic Buoy PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buoy pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask wbarne12 before reusing the design.