4 layers48.8 × 55.3 mm
4 layers100 × 60 mm
Vibration Board
waterloo-rocketry/payload-accelerometer-- Size
- 100 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 113
- Pads
- 319
- Tracks, vias
- 490, 153
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2026
- Updated
- 25 Jun 2026
Overview
Vibration Board is an open-source printed circuit board by waterloo-rocketry, from the waterloo-rocketry/payload-accelerometer- repository on GitHub. It is a 4-layer board of 100 × 60 mm with 65 parts on 113 nets, routed with 490 tracks and 153 vias.
It is built around the MCP2562-H/P, SHT31-DIS-B2.5KS and SPX3819M5-L-3-3, with the G125-MH104M4-04AD000P among its other parts. Its parts include 14 capacitors, 13 resistors, 11 connectors, 5 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Main components
4
MCP2562-H/P
PDIP-8-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
SHT31-DIS-B2.5KS
DFN-8-EP(2.5x2.5)-40℃~+125℃ 0%RH~100%RH 2.15V~5.5V 600uA Factory calibration、Built-in temperature and humidity compensation I2C ±0.2℃ ±2%RH DFN-8-EP(2.5x2.5) Temperature and Humidity Sensor ROHSSensirionTemperature And Humidity Sensor
SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsG125-MH104M4-04AD000P
弯插Wire To Board ConnectorHarwin
README
README.mdpayload-accelerometer-
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R9, R10, R11, R12, R13 |
| 10 | 4952 | 1726750413:KEYSTONE_4952 | 3V3D1, 5V1, MISO1, MISO2, MOSI1, MOSI2, RX1, SCK1, SCK2, TX1 |
| 8 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C7, C8, C9, C10, C28, C33 |
| 8 | Conn_01x06_Pin | jst:CONN6_S6B-PH_JST | J3, J4, J6, J7, J8, J9, J10, J11 |
| 5 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3, D4, D5, D6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C27 |
| 2 | 4.7KR | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R8 |
| 2 | 6pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 1 | 1A | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | F1 |
| 1 | 24MHz crystal | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | Debugging Connector | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J1 |
| 1 | G125-MH104M4-04AD000P | G125-MH104M4-04AD000P:connector_Harwin_G125-MH104M4-04AD000P | J5 |
| 1 | INA180A1 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP2562 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | Micro_SD_Card | G125-MH104M4-04AD000P:microSD_Molex_WM6698CT-ND | J2 |
| 1 | R_US | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | SHT31-DIS-B2.5KS | STM32H745ZIT6:U_SHT3_SEN-M | U1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | STM32H750VBT6TR | STM32H745ZIT6:QFP50P1600X1600X160-100N | U4 |
Questions
How big is the Vibration Board PCB?
It measures 100 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vibration Board use?
65 parts, built around the MCP2562-H/P, SHT31-DIS-B2.5KS, SPX3819M5-L-3-3 and G125-MH104M4-04AD000P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vibration Board KiCad files?
From the waterloo-rocketry/payload-accelerometer- repository on GitHub, at the commit this page was made from: the board is Vibration_Board/Vibration_Board.kicad_pcb and its schematic Accelormeter /Accelormeter/Accelormeter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vibration Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask waterloo-rocketry before reusing the design.
Similar boards
- 2 layers54.3 × 28.9 mm
- 4 layers65 × 56.5 mm
Pi5-environment hat
Fryrocket/orca-review
PUBLIC review mirror for Orca — Claude reads raw source here; Grok implements in private multi-agent-orchestration. No secrets.
29 parts - 2 layers50 × 35 mm
Bench ble lipo sensor b204035a
mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.
23 parts2Apache-2.0 - 2 layers60.2 × 37.4 mm
SensingDevice
menglh20/PlantPulse
Soil Moisture & Environmental Sensing with Wireless Gauge Display
7 parts - 4 layers41.7 × 49.5 mm
- 2 layers
- 4 layers40 × 40 mm
CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT