Skip to the content
2 layers113.5 × 138 mmIR array sensor - Copy, the printed circuit board in 3D

IR array sensor - Copy

Vulcan758/My-PCB-Designs-

all the designs I have so far

Size
113.5 × 138 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
56
Pads
163
Tracks, vias
275, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Oct 2024
Updated
11 Oct 2024

Overview

IR array sensor - Copy is an open-source printed circuit board by Vulcan758, from the Vulcan758/My-PCB-Designs- repository on GitHub. It is a 2-layer board of 113.5 × 138 mm with 49 parts on 56 nets, routed with 275 tracks and 0 vias.

It is built around the ROB-14450, QRE1113 and AMS1117-5.0. Its parts include 17 resistors, 14 diodes, 9 ICs, 4 connectors and 2 capacitors. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

My-PCB-Designs-

all the designs I have so far

Parts

49
QtyValueFootprintReferences
14RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14
7LEDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7
7LEDLED_THT:LED_D3.0mmD9, D10, D11, D12, D13, D14, D15
7QRE1113OptoDevice:OnSemi_CASE100AQU1, U2, U3, U4, U5, U6, U7
31kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR15, R16, R17
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1, SW2
122uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC2
122uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U8
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Bluetooth moduleConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1Input PowerConnector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_HorizontalJ3
1Motor AConnector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_HorizontalJ4
1Motor BConnector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_HorizontalJ5
1ROB-14450ROB-14450:MODULE_ROB-14450U9

More from Vulcan758/My-PCB-Designs-

3
  • 2 layers131.5 × 133.3 mmIR array sensor, the printed circuit board in 3D

    IR array sensor

    Vulcan758/My-PCB-Designs-

    all the designs I have so far

    65 parts
  • 4 layers50.5 × 68.3 mmEsp gari - Copy, the printed circuit board in 3D

    Esp gari - Copy

    Vulcan758/My-PCB-Designs-

    all the designs I have so far

    38 parts

Similar boards

  • 2 layers70 × 45 mmRobot sumo, the printed circuit board in 3D

    Robot sumo

    cszcszczs/robots

    Este repositorio se utilizara para llevar las versiones de los robots, velocista y sumo.

    28 parts
  • 2 layers424 × 267.8 mmPcb seguidor-2024, the printed circuit board in 3D

    Pcb seguidor-2024

    RicardoScarvalho/-Robota-Segue-Linha

    Segue Linha

    341 parts
  • 2 layers95 × 73 mmSumec, the printed circuit board in 3D

    Sumec

    bismarx-v1/Sumec-MiniSumo-HW

    SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

    34 parts3
  • 4 layers122.2 × 115.1 mmScan controller kicad, the printed circuit board in 3D

    Scan controller kicad

    fwachsmuth/Filmkorn-Raw-Scanner

    The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG

    170 parts13MIT
  • 2 layers136.6 × 116.9 mmDragonBot, the printed circuit board in 3D

    DragonBot

    OPRobots/DragonBot

    Robot siguelineas con succión centrifuga y STM32F1

    86 parts8GPL-2.0
  • 2 layers60 × 100 mmRobot boosterpack, the printed circuit board in 3D

    Robot boosterpack

    Hylian/BoosterBot

    Turn your TI LaunchPad into a robot!

    62 parts7
  • 2 layers96 × 78.3 mmYokozunita potencia, the printed circuit board in 3D

    Yokozunita potencia

    OPRobots/Yokozunita

    Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp.

    45 parts2GPL-3.0

Questions

How big is the IR array sensor - Copy PCB?

It measures 113.5 × 138 mm and has 2 copper layers, 1.6 mm thick.

What parts does the IR array sensor - Copy use?

49 parts, built around the ROB-14450, QRE1113 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IR array sensor - Copy KiCad files?

From the Vulcan758/My-PCB-Designs- repository on GitHub, at the commit this page was made from: the board is IR_array_sensor/LFR with TB motor driver/IR_array_sensor - Copy.kicad_pcb and its schematic IR_array_sensor/IR_array_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IR array sensor - Copy design in my own project?

Its repository states no licence, so its author keeps all rights: ask Vulcan758 before reusing the design.