Skip to the content
2 layers96 × 78.3 mmYokozunita potencia, the printed circuit board in 3D

Yokozunita potencia

OPRobots/Yokozunita2

Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp.

Size
96 × 78.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
26
Pads
106
Tracks, vias
309, 25
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
9 Nov 2019
Updated
9 Nov 2019

Overview

Yokozunita potencia is an open-source printed circuit board by OPRobots, from the OPRobots/Yokozunita repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 96 × 78.3 mm with 45 parts on 26 nets, routed with 309 tracks and 25 vias.

It is built around the L6205PD and QRE1113. Its parts include 14 resistors, 5 ICs, 4 connectors and 2 capacitors.

Main components

2

README

README.md

Yokozunita

Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp. alt_tag

Parts

45
QtyValueFootprintReferences
14RResistors_SMD:R_0805R1, R2, R6, R7, R8, R9, R10, R10, R10, R11, R12, R13, R14, R15
13MountingHole_3.2mm_M3_ISO14580Mounting_Holes:MountingHole_3.2mm_M3_ISO14580, , , , , , , , , , , ,
4Conn_01x01Socket_Strips:Socket_Strip_Straight_1x01_Pitch2.54mmIN+1, J6, J7, OUT+1
3QRE1113mods:QRE1113U2, U3, U4
2Conn_01x02_FemaleSocket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mmJ9, J10
2LOGOLibrerias manu:opr_circulo_18x18G***, G***
1CP1Capacitors_THT:CP_Radial_D8.0mm_P5.00mmC2
1CP1Capacitors_THT:CP_Radial_D10.0mm_P7.50mmC1
1Conn_01x02_MalePin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJ3
1Conn_01x12Connector_FFC-FPC:Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_HorizontalJ1
1L6205PDfootprints:POWERSO20IC1
1SW_DPDT_x2Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mmSWBAT1
1Step_down_chinoLibrerias manu:Step_down_chinoU1

More from OPRobots/Yokozunita

1
  • 2 layers88 × 49.5 mmYokozunita ardu, the printed circuit board in 3D

    Yokozunita ardu

    OPRobots/Yokozunita

    Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp.

    26 parts2GPL-3.0

Similar boards

  • 4 layers164 × 118 mmHellen121vag, the printed circuit board in 3D

    Hellen121vag

    rusefi/hellen121vag

    A member of Hellen ECU family for rusEFI firmware.

    129 parts7
  • 4 layers160 × 118 mmHellen88bmw, the printed circuit board in 3D

    Hellen88bmw

    rusefi/hellen88bmw

    307 parts2
  • 2 layers154 × 159 mmHellen64 NB1, the printed circuit board in 3D

    Hellen64 NB1

    rusefi/hellen-miata-NB1

    Issues are tracked publicly at https://github.com/rusefi/hellen-NB1-issues

    198 parts1
  • 4 layers122.2 × 115.1 mmScan controller kicad, the printed circuit board in 3D

    Scan controller kicad

    fwachsmuth/Filmkorn-Raw-Scanner

    The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG

    170 parts13MIT
  • 2 layers136.6 × 116.9 mmDragonBot, the printed circuit board in 3D

    DragonBot

    OPRobots/DragonBot

    Robot siguelineas con succión centrifuga y STM32F1

    86 parts8GPL-2.0
  • 2 layers60 × 100 mmRobot boosterpack, the printed circuit board in 3D

    Robot boosterpack

    Hylian/BoosterBot

    Turn your TI LaunchPad into a robot!

    62 parts7

Questions

How big is the Yokozunita potencia PCB?

It measures 96 × 78.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Yokozunita potencia use?

45 parts, built around the L6205PD and QRE1113. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yokozunita potencia KiCad files?

From the OPRobots/Yokozunita repository on GitHub, at the commit this page was made from: the board is PCBs/Yokozunita_potencia/Yokozunita_potencia.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yokozunita potencia design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).