Skip to the content
2 layers76.2 × 101.6 mmPico2-demo, the printed circuit board in 3D

Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

Size
76.2 × 101.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
47
Pads
258
Tracks, vias
269, 27
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Jan 2024
Updated
31 Mar 2026

Overview

Pico2-demo is an open-source printed circuit board by VTC-WISDOM, from the VTC-WISDOM/node_hardware repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 76.2 × 101.6 mm with 39 parts on 47 nets, routed with 269 tracks and 27 vias.

It is built around the PCF8523T, CR2032 and SC32S-7PF20PPM. Its parts include 6 capacitors, 6 resistors, 5 connectors, 5 switches and 4 diodes. It belongs with the RP2040 and RP2350 boards of this library.

Main components

3

README

README.md

hardware

a collection of schematic and pcb designs for the WiSDOM node unless otherwise specified, everything contained in this repository is licensed under the CERN Open Hardware License version 2 - Weakly Reciprocal License (CERN-OHL-W). this is comparable to the gpl2, see LICENSE for details

Using this repo

using your favorite package manager, install kicad-footprints and kicad-symbols alongside kicad. this is the best way to get the standard libraries. if you for some reason cannot do so, see the linked official kicad libraries in kicad-libs/footprints and kicad-libs/symbols. in the kicad symbol editor, go to preferences -> manage symbol libraries and select "add existing", navigate to the kicad-libs/symbols directory and select the symbol libraries contained therein. repeat this with the symbols contained in kicad-libs/JLCPCB-Kicad-Library. repeat this for footprints.

node-rp2040

stores all of the relevant design files for the WiSDOM node that is based on the RP2040

node-rp2350

like above but the RP2350

other

test projects, antenna and transmission equipment, etc. anything unspecified

docs

will add as much documentation as possible!

Node V6 (RP2040)

changes:

  • removed 5v regulator
  • changed rp2040 xtal to the recommended part due to availability
  • changed the sim card slot due to availability
  • reviewed other parts and made changes to ensure full availability from both JLC and Digikey
  • changed footprints over to JLC library footprints
  • major layout changes- pin headers now broken out in two halves, etc - look at the pcb for a full description
  • removed jst connectors (evil) and replaced them with barrel jacks
  • mounting holes now m2.5 instead of m2

Node V5 (RP2040)

SIM7080G NON-FUNCTIONAL

change since previous version:

  • added USBLC6 esd protection on the usb line
  • added CAT24 eeprom ic
  • removed options for rtc to stick with just the PCF8523
  • added SP3485 for RS485 / MODBUS communication
  • added u.fl connector for the ism radio
  • changed to narrower profile pushbuttons for run/bootsel
  • added additional reset switch to interrupt 3.3V to the board entirely (used to reset the device to a known state for all components including the radios)
  • yet more improvements to routing
  • updated design to be mostly assembled by JLC pcb fab available components

Parts

39
QtyValueFootprintReferences
5SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2, SW3, SW4, SW5
4LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D2, D3, D4
30.1uCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC2, C4, C6
310uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C3, C5
3MountingHole_PadMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2Conn_01x20Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ3, J4
1915_SMAConnector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMountJ1
1915_UFLConnector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalJ2
1ANTResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
1ANT1Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderR4
1ANT2Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderR5
1ANT3Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderR6
1AntennaRF_Antenna:Texas_SWRA416_868MHz_915MHzAE1
1CAT24M01WPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1CR2032WiSDOM:BAT_BAT-HLD-001-THMBAT1
1Conn_02x02_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ5
1MountingHole_PadMountingHole:MountingHole_3.2mm_M3H4
1PCF8523TPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1RFM69HCWRF_Module:HOPERF_RFM9XW_SMDU1
1RaspberryPi_PicoModule:RaspberryPi_Pico_SMD_HandSolderA2
1SC32S-7PF20PPMWiSDOM:XTAL_SC32S-7PF20PPM_EPSXTAL1

The 37 most common of 39 parts.

More from VTC-WISDOM/node_hardware

6
  • 4 layers45.7 × 76.2 mmNode v5 0 0, the printed circuit board in 3D

    Node v5 0 0

    VTC-WISDOM/node_hardware

    Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

    107 parts2CERN-OHL-W-2.0
  • 4 layers45.7 × 76.2 mmNode v5 0 0, the printed circuit board in 3D

    Node v5 0 0

    VTC-WISDOM/node_hardware

    Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

    103 parts2CERN-OHL-W-2.0
  • 6 layers45 × 75 mmNode v6 2 0, the printed circuit board in 3D

    Node v6 2 0

    VTC-WISDOM/node_hardware

    Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

    100 parts2CERN-OHL-W-2.0
  • 6 layers45 × 75 mmNode v6 0 0, the printed circuit board in 3D

    Node v6 0 0

    VTC-WISDOM/node_hardware

    Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

    99 parts2CERN-OHL-W-2.0
  • 6 layers45 × 75 mmNode v6 1 0, the printed circuit board in 3D

    Node v6 1 0

    VTC-WISDOM/node_hardware

    Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

    96 parts2CERN-OHL-W-2.0
  • 2 layers175 × 99.1 mm915-yagi, the printed circuit board in 3D

    915-yagi

    VTC-WISDOM/node_hardware

    Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

    4 parts2CERN-OHL-W-2.0

Similar boards

  • 2 layers79.9 × 68.3 mmBoard v1.1, the printed circuit board in 3D

    Board v1.1

    stustanet/spacelock

    hackerspace lock

    117 parts1
  • 4 layers85 × 56 mmAnthC, the printed circuit board in 3D

    AnthC

    Anthilla/AnthC

    Anthilla AnthC Board

    211 parts40
  • 4 layers45.5 × 19.6 mmStm32 bluet pill, the printed circuit board in 3D

    Stm32 bluet pill

    brendose/stm32_bluet_pill

    This project is a 1.8V STM32WB55 Bluetooth Module with battery charging. The purpose of this project is to provide a development platform for mobile wearable devices.

    93 parts1
  • 4 layers206.6 × 142 mmPower delivery, the printed circuit board in 3D

    Power delivery

    ddacot/fpga-cluster-framework

    This is

    477 parts1
  • 4 layers49.7 × 14.5 mmWindow sensor, the printed circuit board in 3D

    Window sensor

    usimd/window-sensor

    BLE window sensor — nRF54L10 + BTHome v2 for Home Assistant

    26 parts1
  • 2 layers60 × 48 mmUMSwitch, the printed circuit board in 3D

    UMSwitch

    vgskye/UMSwitch

    ventoy but hardware

    44 parts1
  • 4 layers100 × 100 mmAIV DC31 Staff, the printed circuit board in 3D

    AIV DC31 Staff

    ben-hawks/AIV_DC32_Badge

    76 parts
  • 2 layers214 × 174 mmSoundBoxSTM32, the printed circuit board in 3D

    SoundBoxSTM32

    DominikNeugebauer/PCB

    All of my pcb projects i have made so far

    145 parts

Questions

How big is the Pico2-demo PCB?

It measures 76.2 × 101.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pico2-demo use?

39 parts, built around the PCF8523T, CR2032 and SC32S-7PF20PPM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pico2-demo KiCad files?

From the VTC-WISDOM/node_hardware repository on GitHub, at the commit this page was made from: the board is demo-board/pico2-demo/pico2-demo.kicad_pcb and its schematic antennas/915-yagi/915-yagi-v2/yagi/yagi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pico2-demo design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).