4 layers45.7 × 76.2 mm
Node v5 0 0
VTC-WISDOM/node_hardware
Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects
103 parts2CERN-OHL-W-2.0
4 layers45.7 × 76.2 mm
Node v5 0 0
VTC-WISDOM/node_hardware2Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects
- Size
- 45.7 × 76.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 122
- Pads
- 457
- Tracks, vias
- 991, 157
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jan 2024
- Updated
- 31 Mar 2026
Overview
Node v5 0 0 is an open-source printed circuit board by VTC-WISDOM, from the VTC-WISDOM/node_hardware repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 45.7 × 76.2 mm with 107 parts on 122 nets, routed with 991 tracks and 157 vias.
It is built around the RP2040, SIM7080G and AP2112K-3.3, with the PCF8523T, SP3485EN-Y and USBLC6-2SC6 among its other parts. Its parts include 46 capacitors, 18 resistors, 12 ICs, 10 connectors and 3 switches. It belongs with the RP2040 boards of this library.
Main components
9
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
SIM7080G
SMD,17.6x15.7mm2.7V~4.8V B2、B3、B1 I2C、USB、UART、PCM、SPI NB-IoT、CAT-M PCM语音功能 SMD,17.6x15.7mm 2G/3G/4G/5G Modules ROHSSIMCom Wireless Solutions2G/3G/4G/5G Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
PCF8523T
SOIC8Real-Time Clock (RTC) and calendarNXP SemiconductorsUncategorised
SP3485EN-Y
SOP-8SOP-8 RS-485 / RS-422 ICs ROHSYLPTECRS-485 / RS-422 ICs
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
DMG2301L
SOT-23-55℃~+150℃ 1 P-Channel 1.2V 1.5W 150mΩ@2.5V 20V 3A 5.5nC@4.5V P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
SC32S-7PF20PPM
SMD3215-2P-40℃~+85℃ 32.768kHz 70kΩ 7pF Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSSeikoCrystals
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdhardware
a collection of schematic and pcb designs for the WiSDOM node unless otherwise specified, everything contained in this repository is licensed under the CERN Open Hardware License version 2 - Weakly Reciprocal License (CERN-OHL-W). this is comparable to the gpl2, see LICENSE for details
Using this repo
using your favorite package manager, install kicad-footprints and kicad-symbols alongside kicad. this is the best way to get the standard libraries. if you for some reason cannot do so, see the linked official kicad libraries in kicad-libs/footprints and kicad-libs/symbols. in the kicad symbol editor, go to preferences -> manage symbol libraries and select "add existing", navigate to the kicad-libs/symbols directory and select the symbol libraries contained therein. repeat this with the symbols contained in kicad-libs/JLCPCB-Kicad-Library. repeat this for footprints.
node-rp2040
stores all of the relevant design files for the WiSDOM node that is based on the RP2040
node-rp2350
like above but the RP2350
other
test projects, antenna and transmission equipment, etc. anything unspecified
docs
will add as much documentation as possible!
Node V6 (RP2040)
changes:
- removed 5v regulator
- changed rp2040 xtal to the recommended part due to availability
- changed the sim card slot due to availability
- reviewed other parts and made changes to ensure full availability from both JLC and Digikey
- changed footprints over to JLC library footprints
- major layout changes- pin headers now broken out in two halves, etc - look at the pcb for a full description
- removed jst connectors (evil) and replaced them with barrel jacks
- mounting holes now m2.5 instead of m2
Node V5 (RP2040)
SIM7080G NON-FUNCTIONAL
change since previous version:
- added USBLC6 esd protection on the usb line
- added CAT24 eeprom ic
- removed options for rtc to stick with just the PCF8523
- added SP3485 for RS485 / MODBUS communication
- added u.fl connector for the ism radio
- changed to narrower profile pushbuttons for run/bootsel
- added additional reset switch to interrupt 3.3V to the board entirely (used to reset the device to a known state for all components including the radios)
- yet more improvements to routing
- updated design to be mostly assembled by JLC pcb fab available components
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1u | JLCPCB-Kicad-Footprints:C_0402 | C1, C2, C3, C4, C5, C6, C7, C10, C11, C12, C17, C28, C30, C37, C38, C44 +1 |
| 8 | 10u | JLCPCB-Kicad-Footprints:C_0805 | C13, C15, C18, C23, C24, C29, C31, C45 |
| 6 | 1u | JLCPCB-Kicad-Footprints:C_0805 | C14, C16, C25, C26, C27, C41 |
| 4 | 33p | JLCPCB-Kicad-Footprints:C_0402 | C34, C35, C36, C43 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100u | JLCPCB-Kicad-Footprints:C_0805 | C39, C40, C42 |
| 3 | 10k | JLCPCB-Kicad-Footprints:R_0805 | R8, R9, R10 |
| 3 | 22 | JLCPCB-Kicad-Footprints:R_0402 | R11, R12, R13 |
| 3 | PTS636 SM50J SMTR LFS | WiSDOM:SW_PTS636_CNK | SW1, SW2, SW3 |
| 3 | U.FL | JLCPCB-Kicad-Footprints:IPEX-SMD_BWIPX-1-001E | J2, J6, J9 |
| 2 | 10k DNF | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14, R15 |
| 2 | 15pF | JLCPCB-Kicad-Footprints:C_0402 | C19, C20 |
| 2 | 1k | JLCPCB-Kicad-Footprints:R_0805 | R5, R7 |
| 2 | 27.4 | JLCPCB-Kicad-Footprints:R_0603 | R1, R2 |
| 2 | 4.7u | JLCPCB-Kicad-Footprints:C_0805 | C21, C22 |
| 2 | 470k | JLCPCB-Kicad-Footprints:R_0805 | R17, R18 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 6p | JLCPCB-Kicad-Footprints:C_0603 | C32, C33 |
| 2 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1, J8 |
| 1 | logos:qrcode | LOGO | |
| 1 | logos:github_qr | LOGO | |
| 1 | 100nF | JLCPCB-Kicad-Footprints:C_0402 | C48 |
| 1 | 1042240820 | WiSDOM:1042240820_MOL | U11 |
| 1 | 10uF | JLCPCB-Kicad-Footprints:C_0805 | C47 |
| 1 | 22 | JLCPCB-Kicad-Footprints:R_0805 | R16 |
| 1 | 2k | JLCPCB-Kicad-Footprints:R_0805 | R6 |
| 1 | 68nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Battery_Cell | WiSDOM:BAT_BAT-HLD-001-THM | BT1 |
| 1 | CAT24M01W | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | CAT3200-5 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J4 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J3 |
| 1 | Connector, USB-TYPE-C-16P | JLCPCB-Kicad-Footprints:TYPE-C-SMD_HX-TYPE-C-16PIN | J10 |
| 1 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LOGO | logos:wisdom_logo_lineborder | G*** |
| 1 | LOGO | WiSDOM:wisdomcatnomow | G*** |
| 1 | LOGO | WiSDOM:vtsu | G*** |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | PCF8523T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | RFM69HCW | RF_Module:HOPERF_RFM9XW_SMD | U6 |
| 1 | RP2040 | JLCPCB-Kicad-Footprints:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias | U1 |
| 1 | SC32S-7PF20PPM | WiSDOM:XTAL_SC32S-7PF20PPM_EPS | XTAL1 |
| 1 | SIM7080G | WiSDOM:XCVR_SIM7080G | U9 |
| 1 | SP3485EN | JLCPCB-Kicad-Footprints:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U8 |
| 1 | SS14 | JLCPCB-Kicad-Footprints:D_SMA | D2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | W25Q128 | JLCPCB-Kicad-Footprints:SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U14 |
| 1 | ~ | WiSDOM:XTAL-445 | X1 |
The 105 most common of 107 parts.
Questions
How big is the Node v5 0 0 PCB?
It measures 45.7 × 76.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Node v5 0 0 use?
107 parts, built around the RP2040, SIM7080G, AP2112K-3.3 and PCF8523T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Node v5 0 0 KiCad files?
From the VTC-WISDOM/node_hardware repository on GitHub, at the commit this page was made from: the board is node-rp2040/node_v5_0_0/node_v5_0_0.kicad_pcb and its schematic antennas/915-yagi/915-yagi-v2/yagi/yagi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Node v5 0 0 design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from VTC-WISDOM/node_hardware
6- 6 layers45 × 75 mm
Node v6 2 0
VTC-WISDOM/node_hardware
Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects
100 parts2CERN-OHL-W-2.0 - 6 layers45 × 75 mm
Node v6 0 0
VTC-WISDOM/node_hardware
Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects
99 parts2CERN-OHL-W-2.0 - 6 layers45 × 75 mm
Node v6 1 0
VTC-WISDOM/node_hardware
Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects
96 parts2CERN-OHL-W-2.0 - 2 layers76.2 × 101.6 mm
Pico2-demo
VTC-WISDOM/node_hardware
Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects
39 parts2CERN-OHL-W-2.0 - 2 layers175 × 99.1 mm
915-yagi
VTC-WISDOM/node_hardware
Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects
4 parts2CERN-OHL-W-2.0
Similar boards
- 4 layers86.3 × 91.4 mm
485toSDI12
sihyun-noh/zephyr_485toSDI12
Zephyr RTOS 기반 Dajilog MCU 장비의 firmware, custom board 정의, 공통 component, KiCad hardware source를 함께 관리하는 repository입니다.
156 partsApache-2.0 - 4 layers100 × 100 mm
- 2 layers57.8 × 46.1 mm
Pico panel
beleata/fpga-led-panel-sram
iCE40HX1K 64x32 ICND1065L RGB panel with double-buffered SRAM and 2 Mbaud UART image upload
77 parts - 4 layers38.5 × 47 mm
- 2 layers39.2 × 36.6 mm
Link101
robocore-labs/link101-hardware
link101 is a multi-protocol USB interface board. One Type-C cable gives you CAN-FD, RS485, Dynamixel, Feetech, UART, I2C, and MIT Cheetah-protocol ports, all as stable Linux devices.
71 parts1CERN-OHL-S-2.0 - 4 layers70 × 72 mm
- 4 layers70.9 × 75 mm
Flagshep Audio Player V1
HYLDAIC/Flagshep-V1_Audio-Player
A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code
77 parts1CERN-OHL-P-2.0 - 2 layers65 × 58 mm
Quake sensor
ismailcelik-tr/quake-sensor
ADXL355 + ESP32-S3 home seismograph — KiCad 10, 2-layer, script-generated schematic and PCB
58 parts