2 layers
Uext breadboard
vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT
74 parts
2 layers100 × 100 mm
Atx breakout
vortex314/kicadmy personal selection of projects and components in Kicad ESP32 UEXT
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 176
- Nets
- 19
- Pads
- 290
- Tracks, vias
- 117, 16
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Jul 2017
- Updated
- 6 Jun 2018
Overview
Atx breakout is an open-source printed circuit board by vortex314, from the vortex314/kicad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 176 parts on 19 nets, routed with 117 tracks and 16 vias.
It is built around the JUMPER3. Its parts include 14 connectors, 6 fuses, 3 resistors, 3 diodes and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdmy personal selection of projects and components in Kicad ESP32 UEXT
Parts
176| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | PTC 1.25A | Capacitors_SMD:C_1812_HandSoldering | F1, F2, F3, F4, F5, F6 |
| 4 | ATX_PCIE_6PIN | ATX_Breakout:Molex_MiniFit-JR-5556-06A_2x03x4.20mm_Straight_PCIE_6p2 | J4, J5, J6, J7 |
| 4 | BUMPER | ATX_Breakout:BUMPER | BUMPER1, BUMPER2, BUMPER3, BUMPER4 |
| 3 | 470 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2, R3 |
| 3 | JUMPER3 | ATX_Breakout:GND_JMP | JP1, JP2, JP3 |
| 2 | ATX_EPS12V | ATX_Breakout:Molex_MiniFit-JR-5556-08A_2x04x4.20mm_Straight | J2, J3 |
| 2 | CONN_01X01 | Wire_Pads:SolderWirePad_single_0-8mmDrill | P1, P2 |
| 1 | ATX_24PIN | Connectors_Molex_2:Molex_MiniFit-JR-5556-24A_2x12x4.20mm_Straight | J1 |
| 1 | CONN_12V_1 | ATX_Breakout:TerminalBlock_Pheonix_PT-5.0mm_6pol | P4 |
| 1 | CONN_12V_2 | ATX_Breakout:TerminalBlock_Pheonix_PT-5.0mm_6pol | P5 |
| 1 | CONN_3V3 | ATX_Breakout:TerminalBlock_Pheonix_PT-5.0mm_4pol | P6 |
| 1 | CONN_5V | ATX_Breakout:TerminalBlock_Pheonix_PT-5.0mm_4pol | P7 |
| 1 | CONN_MISC | Socket_Strips:Socket_Strip_Straight_2x08 | P3 |
| 1 | JUMPER | ATX_Breakout:12V_JMP | JP4 |
| 1 | LED_OK | LEDs:LED-5MM | D3 |
| 1 | LED_SB | LEDs:LED-5MM | D1 |
| 1 | LED_SW | LEDs:LED-5MM | D2 |
| 1 | LOGIC_BUFFER_3ST | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | SPDT | ATX_Breakout:SW_SPDT_OS102011MS2Q | SW1 |
The 36 most common of 176 parts.
More from vortex314/kicad
5- 2 layers
Uext proto
vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT
72 parts - 2 layers
Bts7960-esp32
vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT
16 parts - 2 layers
- 2 layers
Esp32-drive
vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT
4 parts
Similar boards
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers49 × 49 mm
OSBMS Balancer Rev 0.9
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
76 parts248 - 4 layers137 × 86 mm
- 2 layers100 × 90 mm
- 2 layers59.2 × 41 mm
- 2 layers86 × 54 mm
- 2 layers54.4 × 43.2 mm
- 2 layers146.1 × 53.3 mm
Watersens
whitebox-labs/tentacle
An arduino shield to host and individually isolate up to 4 Atlas Scientific sensor circuits. Measure pH, conductivity, dissolved oxygen, ORP, temperature
77 parts32
Questions
How big is the Atx breakout PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atx breakout use?
176 parts, built around the JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atx breakout KiCad files?
From the vortex314/kicad repository on GitHub, at the commit this page was made from: the board is atx-breakout-source/atx-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atx breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask vortex314 before reusing the design.