
Atx breakout
vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT

my personal selection of projects and components in Kicad ESP32 UEXT
Uext proto is an open-source printed circuit board by vortex314, from the vortex314/kicad repository on GitHub. It is a 2-layer board with 72 parts on 11 nets, routed with 61 tracks and 0 vias.
It is built around the LM1117-3.3. Its parts include 1 capacitor, 1 IC and 1 connector.
my personal selection of projects and components in Kicad ESP32 UEXT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 62 | Wire_Pads:SolderWirePad_single_0-8mmDrill | , , , , , , , , , , , , , , , +46 | |
| 4 | Connectors:1pin | , , , | |
| 1 | Pin_Headers:Pin_Header_Straight_1x11_Pitch2.54mm | J1 | |
| 1 | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | ||
| 1 | limero-lib:UEXT | ||
| 1 | C | Capacitors_THT:C_Disc_D8.0mm_W5.0mm_P5.00mm | |
| 1 | CP | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U1 |

vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT

vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT

vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT


vortex314/kicad
my personal selection of projects and components in Kicad ESP32 UEXT

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

plinkysynth/plinky_public
a public release of the plinky sw and hw

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32


72 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vortex314/kicad repository on GitHub, at the commit this page was made from: the board is projects/bts7960-esp32/uext-proto/uext-proto.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vortex314 before reusing the design.