vonmartins/ESP32CAM_ShieldShield for ESP32-CAM: Li-ion Battery, Battery charger, Microphone and USB
ESP32CAM Shield is an open-source printed circuit board by vonmartins, from the vonmartins/ESP32CAM_Shield repository on GitHub. It is a 4-layer board of 29 × 45 mm with 47 parts on 62 nets, routed with 274 tracks and 35 vias.
It is built around the ADS1115IDGS, AP2112K-3.3 and DW01A, with the USBLC6-2SC6, AO3401A and FS8205A among its other parts. Its parts include 18 resistors, 10 capacitors, 6 ICs, 4 connectors and 2 diodes. It belongs with the power boards and the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C7, C8, C10 |
| 3 | 51 | Resistor_SMD:R_0402_1005Metric | R10, R11, R13 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R12, R16 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R17, R18 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1, J2 |
| 2 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1, SW2 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 200p | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U5 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | D_Schottky_Small | Diode_SMD:D_SOD-123 | D1 |
| 1 | FS8205A | Package_TO_SOT_SMD:SOT-23-6 | Q2 |
| 1 | JST-PH | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1 |
| 1 | SPH0645LM4H | Sensor_Audio:Knowles_SPH0645LM4H-6_3.5x2.65mm | MK1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J4 |
JanClyde05/Road-Accident-Monitoring-System
This directory contains the planning, specification, and initial KiCad project for RAMS Wearable PCB Revision C. Do not fabricate from this directory yet -- manual schematic wiring and DRC verification are still needed.
jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
g210101021/OpenStylophone-RP2040
Overview • Technical Summary • Architecture • Hardware Audit & Remediation • Schematic Subsystems • PCB Layout • Firmware Roadmap • Bill of Materials • Author
GuzziFlipFlops/ESP32-Walkie-Talkie
An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with
justinlindh/bramble
Privacy-first LoRa mesh networking for ESP32-S3, built with ESP-IDF
houseofthe051010/ESP32-Walkie-Talkie-V2
This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.
It measures 29 × 45 mm and has 4 copper layers, 1.6 mm thick.
47 parts, built around the ADS1115IDGS, AP2112K-3.3, DW01A and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vonmartins/ESP32CAM_Shield repository on GitHub, at the commit this page was made from: the board is Hardware/Kicad/ESP32CAM Shield.kicad_pcb and its schematic Hardware/Kicad/ESP32CAM Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vonmartins before reusing the design.