

Pcb lab-3
PCB Lab #3 - Current Sourcing
- Size
- 38.1 × 67.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 59
- Pads
- 269
- Tracks, vias
- 526, 71
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Jul 2020
- Updated
- 21 Jul 2020
Overview
Pcb lab-3 is an open-source printed circuit board by vladbelous, from the vladbelous/pcb-lab-3 repository on GitHub. It is a 2-layer board of 38.1 × 67.9 mm with 93 parts on 59 nets, routed with 526 tracks and 71 vias.
It is built around the NCS2333D and BCR421UW6. Its parts include 27 connectors, 24 resistors, 15 capacitors, 7 ICs and 4 transistors.
Main components
2NCS2333D
SOIC-8-40℃~+125℃ 0.15V/us 2 270kHz 60pA 6uV EMI filtering/RF suppression、Zero drift / auto-zero、ESD protection SOIC-8 Precision Op Amps ROHSonsemiPrecision Op AmpsBCR421UW6
SOT-26-55℃~+150℃ 1 10% 350mA 40V Built-in Over-Temperature Protection (OTP) PWM SOT-26 LED Drivers ROHSDiodes IncorporatedLED Drivers
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | Conn_01x02 | local_footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J2, J3, J4, J303, J304, J305, J306, J307, J308, J402, J403, J404, J407, J501, J502, J503 |
| 10 | 0.1u | local_footprints:0805_HS | C1, C3, C4, C301, C302, C304, C305, C401, C405, C406 |
| 9 | SolderJumper_2_Open | local_footprints:SolderJumper-2_P1.3mm_Open | JP1, JP2, JP301, JP302, JP303, JP304, JP401, JP402, JP403 |
| 8 | 1k | local_footprints:0805_HS | R2, R5, R301, R302, R306, R307, R404, R405 |
| 7 | 100k | local_footprints:0805_HS | R1, R3, R6, R303, R304, R308, R406 |
| 5 | 1u | local_footprints:1206_HS | C2, C303, C402, C403, C404 |
| 4 | 1 | local_footprints:1210_HS | R7, R305, R309, R407 |
| 4 | Q_NMOS_GSD | local_footprints:SOT-23_HS | Q1, Q301, Q302, Q401 |
| 4 | USB_B_Micro | local_footprints:USB-micro-B_4-legs_Banggood | J1, J301, J302, J401 |
| 3 | 3.3k | local_footprints:0805_HS | R4, R401, R402 |
| 3 | NCS2333 | local_footprints:SOIC-8_3.9x4.9mm_Pitch1.27mm_HS | U1, U301, U401 |
| 3 | TestPoint | local_footprints:SMD-TestPoint_01x01 | TP1, TP401, TP402 |
| 2 | Conn_01x03 | local_footprints:Pin_Header_Straight_1x03_Pitch2.54mm | J5, J405 |
| 2 | Conn_01x03_Female | local_footprints:Pin_Header_Straight_1x03_Pitch2.54mm | J309, J311 |
| 2 | INA181 | local_footprints:SOT-23-6_HS | U302, U402 |
| 1 | 100 | local_footprints:1206_HS | R408 |
| 1 | 100 | local_footprints:RV-Pot_3-pin_2.54mm | RV501 |
| 1 | 100k | local_footprints:RV-Pot_3-pin_2.54mm | RV301 |
| 1 | 10k | local_footprints:RV-Pot_3-pin_2.54mm | RV302 |
| 1 | 10k | local_footprints:1206_HS | R403 |
| 1 | 50k | local_footprints:RV-Pot_3-pin_2.54mm | RV1 |
| 1 | BCR421U | local_footprints:SOT-23-6_HS | U501 |
| 1 | Conn_01x02_Female | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J406 |
| 1 | Conn_01x02_Female | local_footprints:Pin_Header_Straight_1x02_Pitch2.54mm | J310 |
| 1 | Conn_01x04 | local_footprints:Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 1 | MCP4011 | local_footprints:SOIC-8_3.9x4.9mm_Pitch1.27mm_HS | U2 |
Similar boards
- 2 layers77 × 57.8 mm

- 2 layers67 × 45 mm

- 2 layers50 × 50 mm

- 2 layers27.8 × 45 mm

Mothbeam
Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…
26 parts3MIT - 2 layers165.1 × 80.6 mm

- 2 layers390 × 93 mm

Pots
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
93 parts960Apache-2.0 - 2 layers217.6 × 68.1 mm

Keezyboost40
ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
93 parts202CC-BY-SA-4.0 - 2 layers100 × 100 mm

Questions
How big is the Pcb lab-3 PCB?
It measures 38.1 × 67.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb lab-3 use?
93 parts, built around the NCS2333D and BCR421UW6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb lab-3 KiCad files?
From the vladbelous/pcb-lab-3 repository on GitHub, at the commit this page was made from: the board is pcb-lab-3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb lab-3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vladbelous before reusing the design.