
Panel
vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…
Weather station is an open-source printed circuit board by vbartusevicius, from the vbartusevicius/weather-station repository on GitHub. It is a 4-layer board of 32 × 52 mm with 47 parts on 30 nets, routed with 548 tracks and 59 vias.
It is built around the SP3485EN-L/TR, ADS1115IDGSR and LM66100DCK, with the LSM6DS3TR-C, SS16 and AO3400A among its other parts. Its parts include 19 resistors, 11 capacitors, 5 ICs, 5 connectors and 4 diodes. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA):
ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity, pressure, lightning,
PM1 / PM2.5 / PM10, VOC / NOx and true CO₂. It runs from 12–32 V DC, talks Wi-Fi and RS-485, serves its own web
dashboard and appears in Home Assistant by itself.
![]() | ![]() |
What it measures · Hardware · Web UI · Build one · Firmware · Development
| Measurement | Sensor | Range |
|---|---|---|
| Wind speed & direction | 4× 40 kHz ultrasonic transducers, time of flight (STM32G431 crown) | 0–60 m/s, 0.1° |
| Rain & hail | 4 piezo discs under the lid, acoustic impacts | 0–200 mm/h, hail size |
| UV index, UV-A / UV-B, sunlight, night sky | GUVB-C21SD + GUVA-C22SD photodiodes + TSL25911 under a PTFE dome | UVI 0–16+, 0.0002–88 000 lx |
| Temperature & humidity | Sensirion SHT40 in a 5-plate radiation shield | ±0.2 °C, ±1.8 % RH |
| Pressure & thunder | Bosch BMP585 | ±0.06 hPa |
| Particulates | Plantower PMSA003I | PM1 / PM2.5 / PM10 |
| VOC & NOx | Sensirion SGP41 + Gas Index Algorithm | index 1–500 |
| CO₂ | Sensirion SCD41 (heated below −8 °C) | 400–5000 ppm |
| Lightning | AS3935 + 500 kHz ferrite antenna | 1–40 km |
| Compass, tilt, vibration | MMC5603 + LSM6DS3 | heading, mast tilt, ground vibration |
Full sensor, enclosure and board reference: docs/hardware.md.
| Cutaway | Exploded | Six boards on one breakaway panel |
|---|---|---|
![]() | ![]() | ![]() |
| radiation shield, probe cartridge, base bay | 13 printed parts, bayonet and threaded joints | crown, main, probe, power, dome, reflector (4-layer, 140.6 × 63.2 mm) |
| Inside | Base | Pagoda | Wind tunnel |
|---|---|---|---|
![]() | ![]() | ![]() | ![]() |
| Crown base | Crown lid | Struts | Probe sleeve |
![]() | ![]() | ![]() | ![]() |
Board plots (top / bottom SVG): crown · main · probe · power · dome · reflector · panel
The station serves its dashboard over Wi-Fi (no cloud, no app). Every value is computed by the firmware; the page only displays it.
Also: MQTT with Home Assistant auto-discovery, and an RS-485 poll / response protocol (CRC-16 frames with every sensor) for wired loggers.
hardware/releases/v1/; which file goes where:
docs/building.md).enclosure/print/ (MJF / SLS
nylon or ASA), plus standard O-rings and a turned PTFE dome.Open design questions and acceptance checks: REVIEW_CHECKLIST.md.
Download from Releases: each release carries the
firmware and the complete hardware package (aeromet-hardware-v1.zip: Gerbers, BOM, CPL, STL / STEP print plates,
drawings, build and calibration guides). Every commit to main that passes CI is released, named after its UTC commit
time (2026.10.24.0040); the firmware reports the same version.
| File | Use |
|---|---|
usb-flash-firmware.bin | first flash of a new board over USB: esptool.py --chip esp32c6 write_flash 0x0 usb-flash-firmware.bin |
firmware.bin | later updates from the Web UI (Setup → Firmware update); carries the crown firmware too |
The version is the UTC commit time, yyyy.mm.dd.hhmm. Local build: python3 station/scripts/release_firmware.py
→ station/build/firmware/.
| Folder | Contents |
|---|---|
hardware/ | spec (product/spec.yaml), SKiDL circuits, KiCad layouts, simulations, release package |
mechanical/ | CadQuery enclosure generator and renderer |
station/ | ESP32-C6 firmware (ESP-IDF), Web UI (station/data/), simulator, unit and Web UI tests |
crown/ | STM32G431 crown firmware (ultrasonic wind, rain, lightning) |
python3 hardware/scripts/build.py # everything: hardware, CAD, release, firmware, tests
docker compose --profile lint run --rm -T cpp-lint "pio test -d station -e native" # firmware unit tests
python3 station/scripts/mock_webui_server.py # Web UI on the simulator: http://127.0.0.1:8765
docker compose --profile lint run --rm lint check . # lint
python3 docs/render_readme_images.py # refresh the README screenshots and PCB renderArchitecture, conventions and every command: AGENTS.md.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n 50V | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7, C8, C9, C21 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R7, R8, R21, R24, R25 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 10u 10V | Capacitor_SMD:C_0603_1608Metric | C4, C13 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | 1u 50V | Capacitor_SMD:C_0603_1608Metric | C19, C20 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 390R | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | SS16 | Diode_SMD:D_SMA | D2, D3 |
| 1 | 0R1 | Resistor_SMD:R_1206_3216Metric | R16 |
| 1 | 1.1A | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | 12-32V + RS485 | gateway_fp:TerminalBlock_Kefa_KF250-3.5-4P | J1 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 1R | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 2u2 100V | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ADS1115IDGSR | gateway_fp:TI_ADS1115_VSSOP-10 | U4 |
| 1 | AO3400A | gateway_fp:AOS_AO3400A_SOT-23 | Q1 |
| 1 | Crown board | Connector_JST:JST_SH_BM12B-SRSS-TB_1x12-1MP_P1.00mm_Vertical | J2 |
| 1 | LM66100 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U2 |
| 1 | LSM6DS3TR-C | gateway_fp:ST_LSM6DS3TR-C_LGA-14 | U5 |
| 1 | PMSA003I PM | gateway_fp:JST_B6B-ZR-SM4-TF | J4 |
| 1 | PSM712 | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | Power board | Connector_JST:JST_SH_BM10B-SRSS-TB_1x10-1MP_P1.00mm_Vertical | J5 |
| 1 | Probe board | Connector_JST:JST_SH_BM10B-SRSS-TB_1x10-1MP_P1.00mm_Vertical | J3 |
| 1 | SERVICE | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | SMAJ36A | Diode_SMD:D_SMA | D1 |
| 1 | SP3485EN-L/TR | gateway_fp:ON_LM393DR2G_SOIC-8 | U7 |
| 1 | XIAO ESP32C6 | gateway_fp:XIAO_ESP32C6_Header | U3 |

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

borzeman/PzbElectronics
Репозиторий для поддержки версионирования при разработке плат для киоска.




klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

Brendanofawesome/SimpleFOC-DualESC
High-performance dual BLDC motor driver with FOC (Field-Oriented Control) algorithm support, designed for applications requiring precise motor control with simultaneous dual-motor operation.

vbartusevicius/knx-dali-gateway
Open-source DIN-rail gateway between a wired KNX TP line and one DALI / DALI-2 line: up to 64 control gear plus DALI-2 multi-master input devices, commissioned entirely through ETS.

petermaerki/puenterswis_heizung_2023_git
Puenterswis Heizungsersatz, Steuerung Anlage mit Oekofen Kaskade Pellematic Maxi PESK
It measures 32 × 52 mm and has 4 copper layers, 1.6 mm thick.
47 parts, built around the SP3485EN-L/TR, ADS1115IDGSR, LM66100DCK and LSM6DS3TR-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vbartusevicius/weather-station repository on GitHub, at the commit this page was made from: the board is hardware/layout/v1/main/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vbartusevicius before reusing the design.