2 layers149.8 × 310.3 mm
2 layers149.8 × 310.3 mm
Grandiceps
vattern/grandiceps19Released under CC BY-SA 4.0 license # grandiceps
- Size
- 149.8 × 310.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 77
- Pads
- 703
- Tracks, vias
- 1,399, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jan 2021
- Updated
- 24 May 2022
Overview
Grandiceps is an open-source printed circuit board by vattern, from the vattern/grandiceps repository on GitHub. It is a 2-layer board of 149.8 × 310.3 mm with 87 parts on 77 nets, routed with 1,399 tracks and 22 vias.
It is built around the WS2812B. Its parts include 38 diodes, 30 switches, 9 capacitors, 1 resistor and 1 IC.
Main components
1README
README.mdReleased under CC BY-SA 4.0 license
grandiceps
QWERTY Layer
ADJUST Layer
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | D_Small | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 8 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D31, D32, D33, D34, D35, D36, D37, D38 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2, H3, H6, H9, H10, H11 |
| 2 | C | foostan:MX_ALPS_PG1350_noLed | SW23, SW29 |
| 2 | X | foostan:MX_ALPS_PG1350_noLed | SW22, SW28 |
| 1 | 1 | foostan:MX_ALPS_PG1350_noLed | SW2 |
| 1 | 2 | foostan:MX_ALPS_PG1350_noLed | SW3 |
| 1 | 3 | foostan:MX_ALPS_PG1350_noLed | SW4 |
| 1 | 4 | foostan:MX_ALPS_PG1350_noLed | SW5 |
| 1 | 5 | foostan:MX_ALPS_PG1350_noLed | SW6 |
| 1 | < | foostan:MX_ALPS_PG1350_noLed | SW20 |
| 1 | A | foostan:MX_ALPS_PG1350_noLed | SW14 |
| 1 | ALT | foostan:MX_ALPS_PG1350_noLed | SW27 |
| 1 | CAPS | foostan:MX_ALPS_PG1350_noLed | SW13 |
| 1 | CTRL | foostan:MX_ALPS_PG1350_noLed | SW25 |
| 1 | D | foostan:MX_ALPS_PG1350_noLed | SW16 |
| 1 | E | foostan:MX_ALPS_PG1350_noLed | SW10 |
| 1 | ESC | foostan:MX_ALPS_PG1350_noLed | SW1 |
| 1 | F | foostan:MX_ALPS_PG1350_noLed | SW17 |
| 1 | G | foostan:MX_ALPS_PG1350_noLed | SW18 |
| 1 | MJ-4PP-9 | foostan:MJ-4PP-9 | J1 |
| 1 | OLED | foostan:OLED_v2 | OL1 |
| 1 | Q | foostan:MX_ALPS_PG1350_noLed | SW8 |
| 1 | R | foostan:MX_ALPS_PG1350_noLed | SW11 |
| 1 | R_Small | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW30 |
| 1 | S | foostan:MX_ALPS_PG1350_noLed | SW15 |
| 1 | SHIFT | foostan:MX_ALPS_PG1350_noLed | SW19 |
| 1 | SUPER | foostan:MX_ALPS_PG1350_noLed | SW26 |
| 1 | T | foostan:MX_ALPS_PG1350_noLed | SW12 |
| 1 | TAB | foostan:MX_ALPS_PG1350_noLed | SW7 |
| 1 | V | foostan:MX_ALPS_PG1350_noLed | SW24 |
| 1 | W | foostan:MX_ALPS_PG1350_noLed | SW9 |
| 1 | WeActBlackPill | tkw:Blackpill | U1 |
| 1 | Z | foostan:MX_ALPS_PG1350_noLed | SW21 |
More from vattern/grandiceps
1Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
Questions
How big is the Grandiceps PCB?
It measures 149.8 × 310.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Grandiceps use?
87 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Grandiceps KiCad files?
From the vattern/grandiceps repository on GitHub, at the commit this page was made from: the board is grandiceps.kicad_pcb and its schematic bottom/bottom.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Grandiceps design in my own project?
Its repository states no licence, so its author keeps all rights: ask vattern before reusing the design.