
GD32F427RE LTC SMPTE no PHY
vanvught/KiCad-GD32F427RE-LTC-SMPTE-no-PHY
KiCad GD32F427RE LTC-SMPTE no PHY
KiCad DMX Pixel 1 Port
DMX Pixel-1 is an open-source printed circuit board by vanvught, from the vanvught/KiCad-DMX-Pixel-1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 84.8 × 62.1 mm with 44 parts on 50 nets, routed with 198 tracks and 27 vias.
It is built around the 74LVC2G125DP, MAX485ED and CA-IS3731HN, with the GT-USB-7010ASV, MXPP6-3K6110 and BAT54C among its other parts. Its parts include 11 capacitors, 9 resistors, 8 connectors, 6 ICs and 5 diodes. It belongs with the lEDs and displays and interfaces and adapters boards of this library.
Firmware
More information https://www.gd32-dmx.org/pixel.html
![]()
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C7, C9, C11 |
| 4 | 5K1 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1, H2, H3, H4 |
| 3 | 10uF/16V | Capacitor_SMD:C_0603_1608Metric | C1, C8, C10 |
| 2 | 100Ω | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 680Ω | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D2, D4 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C6 |
| 1 | 120Ω | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 74LVC2G125 | EasyEDA:SM8_L3.2-W2.9-P0.65-LS4.3-BR | U2 |
| 1 | BAT54C | EasyEDA:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | D3 |
| 1 | CA-IS3731HN | EasyEDA:SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL | U5 |
| 1 | DMX Input | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03503HBLU_1x03_P5.00mm_Horizontal | J8 |
| 1 | DMX Input | Connector_Audio:Jack_XLR_Neutrik_NC3MAH_Horizontal | J6 |
| 1 | DMX Output | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03503HBLU_1x03_P5.00mm_Horizontal | J7 |
| 1 | DMX Output | Connector_Audio:Jack_XLR_Neutrik_NC3FAH2_Horizontal | J5 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | J2 |
| 1 | GT-USB-7010ASV | EasyEDA:USB-C-SMD_G-SWITCH_GT-USB-7010ASV | U1 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_7.5x8mm_SilkScreen | SYM1 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MXPP6-3K6110 | EasyEDA:XFMR-SMD_L7.1-W6.6-P2.54_LT31-120 | U4 |
| 1 | PSM712-LF-T7 | EasyEDA:SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | D5 |
| 1 | Pixel | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type094_RT03504HBLU_1x04_P5.00mm_Horizontal | J3 |
| 1 | SMAJ5.0A | Diode_SMD:D_SMA | D1 |
| 1 | SN6501DBVR | EasyEDA:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U3 |
| 1 | Termination | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |

vanvught/KiCad-GD32F427RE-LTC-SMPTE-no-PHY
KiCad GD32F427RE LTC-SMPTE no PHY

Solderingironspb/ModbusRTU_Master_MQTT_Gateway
Данное устройство выступает мастером сети ModbusRTU. Обменивается данными с подчиненными устройствами (до 247 устройств на линии RS485).


ucw-gadgets/ventilation-control
Board for controlling ventilation system
vanvught/KiCad-GD32F207RG-Pixel-8
KiCad GD32F207RG Pixel 8-ports x 4 Universes

vanvught/KiCad-GD32FxxxRx-no-PHY
GD32F103R GD32F107R GD32F207R GD32F303R GD32F407R development board
vanvught/Kicad-GD32F470VG-Pixel-16
Kicad GD32F470VG Pixel 16-ports x 4 Universes

It measures 84.8 × 62.1 mm and has 2 copper layers, 1.6 mm thick.
44 parts, built around the 74LVC2G125DP, MAX485ED, CA-IS3731HN and GT-USB-7010ASV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vanvught/KiCad-DMX-Pixel-1 repository on GitHub, at the commit this page was made from: the board is DMX-Pixel-1.kicad_pcb and its schematic DMX-Pixel-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).