
Le capybara
sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

a macropad with 4x3=12 keys. integrated pcb powered by stm32f072cbt6.
4x3 derived is an open-source printed circuit board by valerietsoi, from the valerietsoi/4x3_derived repository on GitHub. It is a 2-layer board of 75 × 57.2 mm with 48 parts on 60 nets, routed with 385 tracks and 33 vias.
It is built around the STM32F072CBT6 and PRTR5V0U2X. Its parts include 13 switches, 12 diodes, 10 capacitors, 4 resistors and 4 connectors. It belongs with the keyboards and input boards and the STM32 boards of this library.
4x3, four columns and three rows.
Derived, as in derived from the previous 2x2 macropad.
PCB and firmware tested.
Stabless only.
![]() | ![]() |
Use QMK toolbox to flash the pre-compiled .bin. Source files to be uploaded.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Diode | ScottoKeebs_Components:Diode_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_Plated_1.00u | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12 |
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C5, C6, C8, C9, C10 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 3 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6, RESET |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C7 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_Plated_2.00u | S13 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | U2 |
| 1 | STM32F072CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U3 |

sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072

NCKiser/STM32F072_template
This is a Kicad Template project (that also happens to be a dev-board) for the STM32F072CBT6.



adrientetar/660m
66-key ANSI keyboard PCB, with a STM32F0 MCU and USB-C connection.


hungrygeek/HSKB
Open-source HHKB-layout MX custom keyboard — KiCad PCB, case STL, QMK/VIA firmware. Personal iteration of the HSKB (Happy Sabi Keyboard).
It measures 75 × 57.2 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the STM32F072CBT6 and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the valerietsoi/4x3_derived repository on GitHub, at the commit this page was made from: the board is pcb files/4x3_derived.kicad_pcb and its schematic pcb files/4x3_derived.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask valerietsoi before reusing the design.