

- Size
- 49 × 21.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 22
- Pads
- 109
- Tracks, vias
- 151, 43
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Sep 2026
- Updated
- 20 Sep 2026
Overview
USB C is an open-source printed circuit board by vaishnaviuh, from the vaishnaviuh/kicad_projects repository on GitHub. It is a 4-layer board of 49 × 21.9 mm with 34 parts on 22 nets, routed with 151 tracks and 43 vias.
It is built around the LMR33630ADDA, USBLC6-2SC6 and 0ZCF0300BF2C, with the BC847, SMAJ28A and SMAJ6.0A among its other parts. Its parts include 4 diodes, 2 ICs, 2 connectors, 1 transistor and 1 inductor.
Main components
7LMR33630ADDA
ESOP-8-40℃~+125℃@(TJ) 1 1V~24V 24uA 3.8V~36V 3A 400kHz Adjustable Buck Buck Built-in Yes ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)0ZCF0300BF2C
2920-40℃~+85℃ 1.5W 100A 10mΩ 20s 24V 3A 48mΩ 5.2A 2920 Resettable Fuses ROHSBel FuseResettable FusesBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)SMAJ28A
DO-214AC(SMA)-55℃~+150℃ 28V 31.1V 400W 45.4V 5uA 8.8A TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)SMAJ6.0A
DO-214AC(SMA)-65℃~+150℃ 10.3V 38.8A 400W@10/1000us 6V 7.37V 800uA IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdkicad_projects
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22uF | Capacitor_SMD:C_1210_3225Metric | CO1, CO2, CO3, CO4 |
| 2 | 100k 1% | Resistor_SMD:R_0603_1608Metric | REN2, RFB2 |
| 2 | 10k 1% | Resistor_SMD:R_0603_1608Metric | RC1, RC2 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | CI1, CI2 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2 |
| 1 | 0ZCF0300BF2C | Fuse:Fuse_2920_7451Metric | F1 |
| 1 | 100 ohm | Resistor_SMD:R_0603_1608Metric | R_DCP1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | RP1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | CB1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R_B1 |
| 1 | 15µH | Inductor_SMD:L_Wuerth_WE-PDF | L1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | CV1 |
| 1 | 220nF | Capacitor_SMD:C_0603_1608Metric | CH1 |
| 1 | 24.3k 1% | Resistor_SMD:R_0603_1608Metric | RFB1 |
| 1 | 560 ohm | Resistor_SMD:R_0603_1608Metric | R_L1 |
| 1 | 715k 1% | Resistor_SMD:R_0603_1608Metric | REN1 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Bourns_TCO | Library:Bourns_TCO | TCO1 |
| 1 | DC_in | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
| 1 | FerriteBead 4A 20mR | Inductor_SMD:L_1206_3216Metric | FB1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | LMR33630ADDA | Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalVias | U1 |
| 1 | SMAJ28A | Diode_SMD:D_SMA | D1 |
| 1 | SMAJ6.0A | Diode_SMD:D_SMA | D2 |
| 1 | SS54 | Diode_SMD:D_SMC | D3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J2 |
More from vaishnaviuh/kicad_projects
1- 4 layers47 × 22.6 mm

Similar boards
- 2 layers100 × 100 mm

- 2 layers169.9 × 102.7 mm

Stm32h723zet6
mgalleguilloscespedes-png/proyectro-stm32
en mi afán por el diseño 3d y la electrónica decidí crear mi propia versión de una placa controladora para impresora 3d, basándome en el microcontrolador stm32h723zet6 y la pcb de bigtreetech manta mp8
587 parts - 2 layers68 × 87 mm

- 4 layers50 × 70 mm

Stm32-portable data logger
copperheadhq/copperhead-stm32-data-logger
Portable STM32L433 data logger, 50 × 70 mm, four layers, microSD, USB-C LiPo charging. Designed with copperhead. Never built: do not order expecting it to work.
90 parts3 - 4 layers100 × 50 mm

STM32H7 Board
phancak/STM32H7_Board
High-Performance STM32H7S3 System-on-Module | 600MHz ARM Cortex-M7 | External SDRAM & NAND Flash Integration | 4-Layer High-Speed PCB optimized for real-time control and LCD UI.
112 parts3MIT - 4 layers36 × 36 mm

Rl fc f405.routed
GabuGravin41/rlpcb
RL PCB sits beside KiCad and works like a senior hardware engineer looking over your shoulder. You describe what you want to build; it helps you choose real parts from your KiCad libraries, works out the values, places…
65 parts2 - 2 layers58 × 63 mm

Camping LightRelay
Rustaphor/LightRelay4Camping
Analog light sensor to night power up LED garland. For Camping use.
91 parts2GPL-3.0 - 2 layers120 × 80 mm

Biometric scanner
Sid93/levram-biometric-attendance-scanner
ESP32-S3 face-recognition factory attendance terminal — firmware, KiCad PCB, OpenSCAD enclosure, BOM
45 parts1
Questions
How big is the USB C PCB?
It measures 49 × 21.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the USB C use?
34 parts, built around the LMR33630ADDA, USBLC6-2SC6, 0ZCF0300BF2C and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB C KiCad files?
From the vaishnaviuh/kicad_projects repository on GitHub, at the commit this page was made from: the board is USB/charge/USB_C/USB_C.kicad_pcb and its schematic USB/charge/USB-A/USB_A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB C design in my own project?
Its repository states no licence, so its author keeps all rights: ask vaishnaviuh before reusing the design.