/ChargeController2.0.kicad_pcb.jpg?size=s&soon)

ChargeController3.0
Repository of the HS-2 Battery Management System
- Size
- 95.9 × 90.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 139
- Pads
- 433
- Tracks, vias
- 673, 96
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Oct 2025
- Updated
- 21 May 2026
Overview
ChargeController3.0 is an open-source printed circuit board by UWCubeSat, from the UWCubeSat/BMS-EPS-HS2 repository on GitHub. It is a 2-layer board of 95.9 × 90.2 mm with 96 parts on 139 nets, routed with 673 tracks and 96 vias.
It is built around the BAT46WJ,115-JSM, BQ25756ERRVR and AONS66614, with the 100SP1T1B1M1QEH, 103AT-2 and IHLP6767GZER100M01 among its other parts. Its parts include 26 capacitors, 22 resistors, 11 ICs, 6 transistors and 5 diodes.
Main components
6BAT46WJ,115-JSM
SOD-323-55℃~+125℃ 1 Independent 100V 150mA 1V@250mA 5uA@75V 750mA SOD-323 Schottky Diodes ROHSJSMSEMISchottky DiodesBQ25756ERRVR
VQFN-36-EP(6x5)-40℃~+125℃ 17uA 1~7 20A 4.2V~36V Charging IC I2C Lithium Battery、LiFePO4 Battery Support VQFN-36-EP(6x5) Battery Management ROHSTexas InstrumentsBattery ManagementAONS66614
DFN-8(5x6)1 N-channel 1.8V 2.4mΩ@10V 3.31nF 30pF 51nC 60V 745pF 78W 85A N-Channel Standalone ±20V DFN-8(5x6) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs100SP1T1B1M1QEH
插件-30℃~+85℃ 12.7mm 120V 28.19mm 28V 50,000 cycles 5A 6.86mm Cylinder Lever PC Pin SPDT Through Hole 插件 Toggle Switches ROHSE-SwitchToggle Switches103AT-2
ThroughholeThroughhole NTC Thermistors ROHSSEMITECNTC ThermistorsIHLP6767GZER100M01
SMD,17.2x17.2mm10uH 12mΩ 16.5A 25A ±20% SMD,17.2x17.2mm Power Inductors ROHSVishay IntertechnologyPower Inductors
README
README.mdBMS-EPS-HS2
Repository of the HS-2 Battery Management System
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C14, C16, C19, C20, C25, C27 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R16, R17, R19, R20, R21, R22 |
| 5 | 10 | Resistor_SMD:R_0603_1608Metric | R4, R11, R12, R14, R30 |
| 5 | 1M | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R15, R18 |
| 5 | 1M | Resistor_SMD:R_0201_0603Metric | R_AC1, R1, R2, R3, R5 |
| 5 | SISH101DN-T1-GE3 | bmsfootprints:SISH | U2, U3, U4, U7, U8 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C9, C10, C11 |
| 4 | 100u | bmsfootprints:T520D107 | C13, C17, C18, C24 |
| 4 | 10u | bmsfootprints:CGA6P1X7R1N106K250AC | C5, C8, C12, C21 |
| 4 | AONS66614 | bmsfootprints:AON6482 | Q5, Q6, Q7, Q8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H2, H3, H4, H8 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C3, C7, C22 |
| 3 | BAT46WJ_115 | bmsfootprints:BAT46WJ115 | U9, U10, U11 |
| 3 | GREEN | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 470n | Capacitor_SMD:C_0402_1005Metric | C15, C26 |
| 2 | 5m | Resistor_SMD:R_1206_3216Metric | R_AC_SNS1, RR_BATT_SNS1 |
| 2 | Conn_02x26_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x26_P2.54mm_Vertical | J1, J12 |
| 2 | DIOM4336X265N | bmsfootprints:SS26 | D4, D5 |
| 2 | SI4122DY-T1-GE3 | bmsfootprints:SI4122. | U5, U6 |
| 2 | SOT91P240X110-3N | bmsfootprints:2N7002K-7 | Q12, Q13 |
| 1 | 100SP1T1B1M1QEH | bmsfootprints:SW_100SP1T1B1M1QEH | SW1 |
| 1 | 103AT-2 | bmsfootprints:103AT-2 | RT1 |
| 1 | 133k | Resistor_SMD:R_0603_1608Metric | R_FSW_SYNC1 |
| 1 | 16.2k | Resistor_SMD:R_0603_1608Metric | R_FBG1 |
| 1 | 16.67k | Resistor_SMD:R_0603_1608Metric | R_ICHG1 |
| 1 | 1u | Capacitor_SMD:C_0201_0603Metric | C23 |
| 1 | 200k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 249k | Resistor_SMD:R_0402_1005Metric | R_FB1 |
| 1 | 25k | Resistor_SMD:R_0402_1005Metric | R_ILIM_HIZ1 |
| 1 | 3.3V_PULLUP_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 30.1k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 330k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 40.2k | Resistor_SMD:R_0603_1608Metric | R_AC2 |
| 1 | 400k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 470k | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 47u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 5.23k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 60.4k | Resistor_SMD:R_0603_1608Metric | R_AC3 |
| 1 | BQ25756ERRVR | bmsfootprints:IC_BQ25756ERRVR | U1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J20 |
| 1 | IHLP6767GZER100M01 | bmsfootprints:IND_IHLP6767GZER100M01 | L1 |
| 1 | LOGO | bmsfootprints:logoHSL | G*** |
More from UWCubeSat/BMS-EPS-HS2
4- 2 layers90.2 × 95.9 mm
/ChargeController2.0.kicad_pcb.jpg?size=s&soon)
- 2 layers99.5 × 99.5 mm
/Charge%20Controller.kicad_pcb.jpg?size=s&soon)
- 4 layers90.2 × 95.9 mm

- 2 layers95.9 × 90.2 mm

Similar boards
- 4 layers100 × 70 mm

- 4 layers160 × 80 mm

- 2 layers112.7 × 100 mm

- 2 layers120 × 65 mm

Hack a bot controller
aj-floater/hack-a-bot-controller
Hack-A-Bot 2026 Raspberry Pi Pico wireless controller hardware
25 parts - 2 layers127 × 203.2 mm

- 2 layers206.4 × 94.4 mm

ControlPanel Common Anode
JimKueneman/TurnoutBoss
This repository contains all the design files, manuals, firmware, production information for the LCC TurnoutBoss Node
98 parts1 - 6 layers276 × 93.5 mm

Mnt reform motherboard
Junkz3/wrench-board
A senior microsoldering technician, available to every repair shop from the seasoned pro to the apprentice. Powered by Claude Opus 5
505 parts259 - 2 layers75.8 × 19.2 mm

3S coinCellChargeController
PocketConcepts/Pocket_PSU
A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.
78 parts36
Questions
How big is the ChargeController3.0 PCB?
It measures 95.9 × 90.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ChargeController3.0 use?
96 parts, built around the BAT46WJ,115-JSM, BQ25756ERRVR, AONS66614 and 100SP1T1B1M1QEH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ChargeController3.0 KiCad files?
From the UWCubeSat/BMS-EPS-HS2 repository on GitHub, at the commit this page was made from: the board is hardware/Charge Controller 3.0 Files (Michael_Sky)/ChargeController3.0/ChargeController3.0.kicad_pcb and its schematic hardware/Charge Controller 3.0 Files (Michael_Sky)/ChargeController3.0/BQ25756E.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ChargeController3.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask UWCubeSat before reusing the design.