2 layers120 × 65 mm
Hack a bot controller
aj-floater/hack-a-bot-controller
Hack-A-Bot 2026 Raspberry Pi Pico wireless controller hardware
25 parts
2 layers112.7 × 100 mm
PCB Shield STM32
erod4/Senior-Design1- Size
- 112.7 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 121
- Pads
- 232
- Tracks, vias
- 303, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Oct 2024
- Updated
- 13 May 2025
Overview
PCB Shield STM32 is an open-source printed circuit board by erod4, from the erod4/Senior-Design repository on GitHub. It is a 2-layer board of 112.7 × 100 mm with 51 parts on 121 nets, routed with 303 tracks and 11 vias.
It is built around the LM2903P and 100SP1T1B1M1QEH. Its parts include 16 resistors, 13 capacitors, 10 connectors, 3 diodes and 2 ICs. It belongs with the STM32 boards of this library.
Main components
2Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R13, R14 |
| 5 | 56K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | CN6, CN9, LCD1 |
| 2 | 10µ | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C10, C12 |
| 2 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | CN11, CN12 |
| 2 | Conn_02x19_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | CN7, CN10 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | 0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R19 |
| 1 | 0.1µ | Capacitor_THT:C_Radial_D4.0mm_H5.0mm_P1.50mm | C14 |
| 1 | 1.8n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 100SP1T1B1M1QEH | 100SP1T1B1M1QEH:SW_100SP1T1B1M1QEH | S1 |
| 1 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 10µ | Capacitor_THT:C_Radial_D4.0mm_H5.0mm_P1.50mm | C1 |
| 1 | 180p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C6 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 1n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 1nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 1µ | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C13 |
| 1 | 220p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 270µ | Capacitor_THT:C_Radial_D4.0mm_H5.0mm_P1.50mm | C8 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 4.45K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 50k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 680p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | CN8 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | CN5 |
| 1 | D | Diode_THT:D_A-405_P7.62mm_Horizontal | D4 |
| 1 | LM2903P | LM2903P:DIP794W45P254L959H508Q8 | U2 |
| 1 | R_Var | Potentiometer_THT:Potentiometer_ACP_CA9-H2,5_Horizontal | RV1 |
| 1 | SN49B11 | SN49B11:SWITCHCRAFT_SN49B11 | Audio_In1 |
| 1 | ~ | custom_library:TL074 | U3 |
Similar boards
- 2 layers127 × 203.2 mm
- 2 layers95.9 × 90.2 mm
- 2 layers206.4 × 94.4 mm
ControlPanel Common Anode
JimKueneman/TurnoutBoss
This repository contains all the design files, manuals, firmware, production information for the LCC TurnoutBoss Node
98 parts1 - 2 layers216.9 × 86.8 mm
Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
51 parts2.1k - 2 layers49.4 × 94.2 mm
- 2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT - 2 layers170 × 162 mm
Snowflake
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
51 parts915
Questions
How big is the PCB Shield STM32 PCB?
It measures 112.7 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Shield STM32 use?
51 parts, built around the LM2903P and 100SP1T1B1M1QEH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Shield STM32 KiCad files?
From the erod4/Senior-Design repository on GitHub, at the commit this page was made from: the board is PCB_Shield_STM32/PCB_Shield_STM32.kicad_pcb and its schematic PCB_Shield_STM32/PCB_Shield_STM32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Shield STM32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask erod4 before reusing the design.