

PowerNode2
- Size
- 78.4 × 64.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 83
- Pads
- 207
- Tracks, vias
- 612, 46
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20200119)
- Created
- 1 Oct 2019
- Updated
- 5 Mar 2022
Overview
PowerNode2 is an open-source printed circuit board by utahrobotics, from the utahrobotics/Electrical-2019-2020 repository on GitHub, published under the MIT licence. It is a 2-layer board of 78.4 × 64.8 mm with 67 parts on 83 nets, routed with 612 tracks and 46 vias.
It is built around the ATTINY84-20PU, CD4511BE and 74HC595N. Its parts include 33 resistors, 6 capacitors, 4 ICs, 2 diodes and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY84-20PU
PDIP-14-40℃~+85℃ 10bit 12 2.7V~5.5V 20MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CD4511BE
PDIP-16-55℃~+125℃ 3V~18V 40nA DIP-16 Digital Tube Drivers ROHSTexas InstrumentsDigital Tube Drivers74HC595N
DIP-16-40℃~+85℃ 100ns@5V,50pF 10MHz 3.2V~6V 74HC Series 8 Asynchronous clear function、Output enable Serial-to-Parallel Tri-State DIP-16 Shift Registers ROHSHGSEMIShift Registers
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R27, R30 +3 |
| 12 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R21, R22, R23, R24, R25, R26, R28, R29, R31, R32, R33 |
| 9 | 2,54_0,9 | Connector_Wire:SolderWirePad_1x01_Drill1mm | BL*1, BL*2, DP1, LE*1, LE*2, LT*1, LT*2, PB2, QH*1 |
| 5 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C6, C7 |
| 4 | WIREPAD4,16O1,6 | Connector_Wire:SolderWirePad_1x01_Drill1.5mm | GNDHIIN1, GNDHIOUT1, VHIIN1, VHIOUT1 |
| 3 | LED5MM | LED_THT:LED_D5.0mm | 5V1, PWRLED1, VOLT1 |
| 2 | 2,15_1,0 | Connector_Wire:SolderWirePad_1x01_Drill1mm | GND1, GND2 |
| 2 | CD4511B | Package_DIP:DIP-16_W7.62mm_LongPads | IC1, IC7 |
| 2 | LTS-4301P | Display_7Segment:Sx39-1xxxxx | LED1, LED2 |
| 1 | 1nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 43k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 74HC595N | Package_DIP:DIP-16_W7.62mm_LongPads | IC5 |
| 1 | ACS712xLCTR-30A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC4 |
| 1 | ATtiny84-20PU | Package_DIP:DIP-14_W7.62mm | U$1 |
| 1 | SW_DPDT_x2 | OSx02011MS2Qx1:OS202011MS2Qx1 | S2 |
| 1 | SW_SPDT | OSx02011MS2Qx1:OS102011MS2Qx1 | S1 |
| 1 | TRIM_US-B25P | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | R3 |
| 1 | W237-4 | PowerNode2:W237-4 | INOUT1 |
More from utahrobotics/Electrical-2019-2020
1- 2 layers86.6 × 63 mm

Similar boards
- 2 layers79 × 107 mm

Eurorack spinfx
grappendorf/eurorack-spinfx
Spin FV-1 based effects module for Eurorack systems
80 parts16 - 2 layers100 × 100 mm

- 2 layers

- 2 layers75.5 × 46 mm

HelioHeat
E-anae/HelioHeat-PCB
Cette section présente l'architecture d'un thermomètre autonome fonctionnant à l'aide d'un panneau solaire. L'objectif est de mesurer la température d'un lieu et d'afficher sur des afficheurs 7 segments tout en assurant…
14 parts - 2 layers166.4 × 181.6 mm

Calculator ver1
PhdWizards/4-Bit-Discrete-Transistor-Adder
The core 4-bit binary adder is implemented entirely using discrete transistor-resistor logic. The resulting 5-bit binary value is converted to BCD using 74HC-series logic and displayed on two 7-segment displays.
308 parts - 2 layers80 × 50 mm

Customised Arduino Uno Layout
sidhesh1010/Custom-Arduino-Uno-Board
This project is a custom-designed Arduino Uno compatible PCB developed using KiCad. The design is based on the ATmega328P microcontroller and integrates multiple hardware modules such as motor driver, seven segment…
58 parts - 2 layers80 × 50 mm

Atmega328p DevBoard Hardware
singharyan2001/hw-Atmega328p-DevBoard
This Repository tracks the development of Atmega328p MCU based development board design, which is designed for learning end to end pcb designing via KiCad Software.
58 parts - 4 layers130 × 131.3 mm

Questions
How big is the PowerNode2 PCB?
It measures 78.4 × 64.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerNode2 use?
67 parts, built around the ATTINY84-20PU, CD4511BE and 74HC595N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerNode2 KiCad files?
From the utahrobotics/Electrical-2019-2020 repository on GitHub, at the commit this page was made from: the board is PowerNode/Power Node V3.0/PowerNode2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerNode2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).