2 layers80 × 35 mm
2 layers134 × 45 mm
Infozilla
USSTRocketry/hardware1- Size
- 134 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 90
- Pads
- 204
- Tracks, vias
- 462, 58
- Pours
- 243
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Nov 2024
- Updated
- 10 Aug 2026
Overview
Infozilla is an open-source printed circuit board by USSTRocketry, from the USSTRocketry/hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 134 × 45 mm with 45 parts on 90 nets, routed with 462 tracks and 58 vias.
It is built around the TEENSY 4.1, BMP280 and MCP9808-E/MS. Its parts include 9 capacitors, 8 resistors, 7 ICs, 3 diodes and 2 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3
TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorised
BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure Sensors
MCP9808-E/MS
MSOP-8-40℃~+125℃ 13bit 2.7V~5.5V 250ms I2C、SMBus ±0.5℃ MSOP-8 Temperature Sensors ROHSMicrochip TechnologyTemperature Sensors
README
README.mdUSST Rocketry Avionics hardware
Telemetry board (Infozilla)
SRAD flight computer board (Phoenix)
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7, R8 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4, JP5, JP6 |
| 3 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP1, JP2, JP3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | FerriteBead | Inductor_SMD:L_0402_1005Metric | FB1, FB2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 47pF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | Adafruit_RFM9x | custom_library:Adafuit_RFM9x | U7 |
| 1 | Adafruit_Ult_GPS | custom_library:Adafruit_Ult_GPS | U6 |
| 1 | BMP280 | custom_library:BMP280 | U2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | JST_S4B-XH-A-1 | custom_library:JST_S4B-XH-A-1 | J1 |
| 1 | LIS3MDLTR | custom_library:LIS3MDLTR | U3 |
| 1 | LOGO | custom_library:rocket_avionics_logo | G*** |
| 1 | LOGO | USST_logo:usask_logo_15x3.4_silkscreen | G*** |
| 1 | LOGO | custom_library:infozilla_vector | G*** |
| 1 | LOGO | USST_logo:USST_logo_Small | G*** |
| 1 | LSM6DSOXTR | custom_library:LSM6DSOXTR | U4 |
| 1 | MCP9808 | custom_library:MCP9808T-E_MS | U5 |
| 1 | Teensy4.1 | custom_library:Teensy41 | U1 |
More from USSTRocketry/hardware
2- 2 layers45 × 45 mm
Similar boards
- 2 layers102 × 113 mm
CosmicWatch ventidue
RedNicStone/CosmicWatch-ventidue
The following modules have been written so far: - Custom rendering pipeline - OLED driver [Needs push to support DMA] - On-chip coincidence detection - Example for testing peripherals
123 parts1 - 2 layers80 × 61 mm
- 2 layers166 × 88.9 mm
- 4 layers72.4 × 95.3 mm
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 4 layers100 × 75 mm
OpenHW DevKit
openhwfoundation/core-v-mcu-devkit
This is the CORE-V MCU DevKit project, hosting the open-source artifacts for the CORE-V MCU Development Kit.
235 parts18 - 4 layers60 × 60 mm
- 4 layers42 × 42 mm
Dynossat edu obc
BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
60 parts14 - 2 layers46 × 84 mm
Questions
How big is the Infozilla PCB?
It measures 134 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Infozilla use?
45 parts, built around the TEENSY 4.1, BMP280 and MCP9808-E/MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Infozilla KiCad files?
From the USSTRocketry/hardware repository on GitHub, at the commit this page was made from: the board is infozilla/infozilla.kicad_pcb and its schematic houston/houston.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Infozilla design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).