
Usb controlled debug hub
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

USB to CAN FD
Busted umbrella is an open-source printed circuit board by useless-branch, from the useless-branch/busted-umbrella repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 50 × 50 mm with 45 parts on 73 nets, routed with 232 tracks and 64 vias.
It is built around the ATSAME51J18A-MF, PESD2CAN and PESD2USB3UX-TR. Its parts include 23 capacitors, 7 resistors, 4 ICs, 4 diodes and 2 connectors. It belongs with the SAM D and SAM boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C8, C9, C10, C11, C14, C15, C19, C20, C21, C23 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C6, C7, C17, C22 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric | C13, C16, C18 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C1, C12 |
| 2 | 220R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | Green | LED_THT:LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm | D2, D3 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 8MHz | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | ADM3058E | Package_SO:SOIC-8_7.5x5.85mm_P1.27mm | U4 |
| 1 | ATSAME51J18A-MF | Package_DFN_QFN:VQFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm | U1 |
| 1 | CRV2S0505SC | ownLib:Murata_CRV2 | U3 |
| 1 | DB9_Male | ownLib:DSUB-9_Male_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm | J2 |
| 1 | EMI_Filter_LCL | ownLib:3Pole_F1206 | FL1 |
| 1 | PESD2CAN | Package_TO_SOT_SMD:SOT-323_SC-70 | D4 |
| 1 | PESD2USB3UX-TR | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | SWD | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | TL2201 | ownLib:TL2201 | SW1 |
| 1 | TPS7B82-Q1 | Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.95x2.15mm | U2 |
| 1 | USB_B | ownLib:USB_B_OST_USB-B1HSxx_Horizontal | M1 |
The 44 most common of 45 parts.

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

ucandevices/CFDC_embedded
Embedded code and PCB for CAN FD to USB converter





Blizzard26/OAM-KNX2HovalGateway
OpenKNX Application to connect KNX Bus to Hoval TopTronic Bus
It measures 50 × 50 mm and has 4 copper layers, 1.69 mm thick.
45 parts, built around the ATSAME51J18A-MF, PESD2CAN and PESD2USB3UX-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the useless-branch/busted-umbrella repository on GitHub, at the commit this page was made from: the board is busted-umbrella.kicad_pcb and its schematic busted-umbrella.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).