2 layers100 × 100 mm
2 layers52 × 109 mm
Glasgow can
attie/glasgow-can6CAN Interface addon for Glasgow
- Size
- 52 × 109 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 47
- Pads
- 206
- Tracks, vias
- 361, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Oct 2020
- Updated
- 6 Jan 2021
Overview
Glasgow can is an open-source printed circuit board by attie, from the attie/glasgow-can repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 52 × 109 mm with 46 parts on 47 nets, routed with 361 tracks and 51 vias.
It is built around the TCAN1051HD, TJ-S1005SW4TGLC0A-A5 and PESD2CAN, with the TJ-S1005SW4TGLC2G-A5 and TLP240A(F among its other parts. Its parts include 15 connectors, 10 resistors, 8 diodes, 4 capacitors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
5
TCAN1051HD
SOIC-8-55℃~+125℃ 2Mbps 4.5V~5.5V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
TJ-S1005SW4TGLC0A-A5
0402-40℃~+80℃ 120° 2.4V 20mA 600nm~610nm 60mcd~100mcd 610nm 72mW Discrete Diode Orange Top-mount Water Clear 0402 LED Indication - Discrete ROHSTOGIALEDLED Indication - Discrete
PESD2CAN
SOT-23-55℃~+150℃ 1nA 2 230W@8/20us 24V 25pF 28V 41V 5A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)TJ-S1005SW4TGLC2G-A5
0402-40℃~+80℃ 111mW 120° 2.8V~3.4V 20mA 500mcd 520nm~530nm 525nm Discrete Diode Emerald Green Top-mount Water Clear 0402 LED Indication - Discrete ROHSTOGIALEDLED Indication - Discrete
TLP240A(F
DIP-41.27V 1ms 200us 500mA 5kV 600mΩ 60V One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSToshibaSolid State Relays (MOS Output)
README
README.mdGlasgow CAN Interface Addon
This repository provides the hardware and software components of a CAN Interface Add-On for the Glasgow Digital Interface Explorer.
A rough spec is outlined below:
- Sits alongside a Glasgow board
- 2x CAN interfaces, available on a single port
- Standard DE-9 connectors
- Default pinout is suitable for use with existing CAN and OBD-II adapter cables (on CAN1 and CAN2 repsectively)
- Can be easily rewired by cutting jumpers
- Spring-loaded terminal blocks for ease-of-use
- Indicator LEDs for Tx and Rx
- Software configurable 120Ω termination, with state LED
- ESD protection
- CAN FD support in hardware (software to follow)
Future plans:
- Isolation between each CAN port and the Glasgow (and host)
Out-of-Tree support will be required when work on the applet begins (see PR #213).
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | pkl_jumper_nc | pkl_jumpers:J_NC_0603_20 | J10, J11, J12, J13, J14, J15 |
| 4 | 25k | Resistor_SMD:R_0402_1005Metric | R3, R5, R9, R11 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | TJ-S1005SW4TGLC0A-A5 | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D2, D4, D6, D8 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R10 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 120 | Resistor_SMD:R_1206_3216Metric | R1, R7 |
| 2 | 2834077-2 | glasgow-can:TE_2834077-2 | J1, J6 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 510 | Resistor_SMD:R_0402_1005Metric | R2, R8 |
| 2 | A-DS 09 A/KG-T2S | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J4, J9 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J7 |
| 2 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3, J8 |
| 2 | PESD2CAN | rhais_package-smd:SOT-23 | D1, D5 |
| 2 | TCAN1051 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.7x2.05mm | U1, U2 |
| 2 | TJ-S1005SW4TGLC2G-A5 | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D3, D7 |
| 2 | TLP240A | glasgow-can:TLP240A_5 | Q1, Q3 |
| 1 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J5 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
Similar boards
- 2 layers50.8 × 98.3 mm
- 4 layers50 × 50 mm
HSCanT
cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
130 parts52Apache-2.0 - 2 layers26 × 13.6 mm
CFDC embedded
ucandevices/CFDC_embedded
Embedded code and PCB for CAN FD to USB converter
36 parts15LGPL-3.0 - 4 layers55 × 35 mm
- 4 layers50 × 50 mm
- 2 layers29 × 26.5 mm
- 4 layers65 × 56 mm
Questions
How big is the Glasgow can PCB?
It measures 52 × 109 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Glasgow can use?
46 parts, built around the TCAN1051HD, TJ-S1005SW4TGLC0A-A5, PESD2CAN and TJ-S1005SW4TGLC2G-A5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glasgow can KiCad files?
From the attie/glasgow-can repository on GitHub, at the commit this page was made from: the board is hardware/glasgow-can/glasgow-can.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glasgow can design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).