2 layers96.8 × 127.2 mm
4 layers65 × 56 mm
Raspberry Pi-5-shield
Alexandr-Filatov/Raspberry-Pi-5-shield1- Size
- 65 × 56 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 67
- Pads
- 157
- Tracks, vias
- 178, 40
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Sep 2024
- Updated
- 16 Sep 2024
Overview
Raspberry Pi-5-shield is an open-source printed circuit board by Alexandr-Filatov, from the Alexandr-Filatov/Raspberry-Pi-5-shield repository on GitHub. It is a 4-layer board of 65 × 56 mm with 34 parts on 67 nets, routed with 178 tracks and 40 vias.
It is built around the SKMW30F-05, PESD2CAN and X322516MOB4SI. Its parts include 13 capacitors, 7 resistors, 5 diodes, 3 connectors and 1 IC.
Main components
3
SKMW30F-05
DIP,25.4x25.4mm1 1.5kV 30W 5V 6A 90% 9V~36V DIP,25.4x25.4mm Power Module/Power Supply ROHSMWIsolated Power Modules
PESD2CAN
SOT-23-55℃~+150℃ 1nA 2 230W@8/20us 24V 25pF 28V 41V 5A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
X322516MOB4SI
SMD3225-4P-40℃~+85℃ 12pF 16MHz 50Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5, C6, C12 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C11 |
| 3 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C10 |
| 2 | 470u | Capacitor_SMD:CP_Elec_10x10 | C7, C9 |
| 2 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H5, H6 |
| 1 | 100u | Capacitor_SMD:CP_Elec_10x10 | C13 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | ACM2520-301-2P | Filter_My:ACM25201022PT002 | FL1 |
| 1 | Conn_02x02_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J2 |
| 1 | DS1073-01-2x5-MVT6 | Molex_My:MIni-Fit_02x05_Vertical | J3 |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | PESD2CAN | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | Raspberry Connector | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | SKMW30F-05 | DCDC_My:SKMW30G12 | PS1 |
| 1 | TD541SCANH | Mornsun_My:DFN-20 | D1 |
| 1 | X322516MOB4SI | Crystal_My:X322516MOB4SI | Y1 |
Similar boards
- 2 layers46 × 46 mm
Maiana Blue N2000 v8.2
Haimana/MAIANA_BLUE
Firmware and hardware materials for the MAIANA-class AIS transponder ecosystem. The design builds on the open MAIANA project (GPL v3, Peter Antypas).
54 parts3 - 2 layers43.8 × 25 mm
Calve heater
R-Mutura/calve_heater
Hardware and software Implementation of a calf heater fabric
70 parts1 - 2 layers323.9 × 128.6 mm
75-keyboard pcb
cheephy/75-keyboard-pcb
A test project following master zen's "How to make a keyboard from scratch" to make a gmmk pro 75% layout style keybord using KiCad and FreeCad.
185 parts - 2 layers51.6 × 98 mm
- 2 layers46 × 46 mm
NMEA2000Adapter-8.1
rolandvs/ais_transponder
A real, functioning low-power AIS transponder (class B)
52 parts1GPL-3.0 - 4 layers50 × 50 mm
HSCanT
cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
130 parts52Apache-2.0 - 2 layers26 × 13.6 mm
CFDC embedded
ucandevices/CFDC_embedded
Embedded code and PCB for CAN FD to USB converter
36 parts15LGPL-3.0
Questions
How big is the Raspberry Pi-5-shield PCB?
It measures 65 × 56 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Raspberry Pi-5-shield use?
34 parts, built around the SKMW30F-05, PESD2CAN and X322516MOB4SI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raspberry Pi-5-shield KiCad files?
From the Alexandr-Filatov/Raspberry-Pi-5-shield repository on GitHub, at the commit this page was made from: the board is Raspberry Pi 5 shield.kicad_pcb and its schematic Raspberry Pi 5 shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raspberry Pi-5-shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alexandr-Filatov before reusing the design.