2 layers192.2 × 150.5 mm
2 layers
TEMP LOGGER
urielzbee/Temperature_LoggerTemperature Data Logger
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 56
- Pads
- 135
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 May 2024
- Updated
- 3 Aug 2024
Overview
TEMP LOGGER is an open-source printed circuit board by urielzbee, from the urielzbee/Temperature_Logger repository on GitHub. It is a 2-layer board with 37 parts on 56 nets.
It is built around the LMV321, GD25Q16CSJGR and MIC5504-3.3YM5, with the DMP6350S among its other parts. Its parts include 7 capacitors, 7 resistors, 6 ICs, 4 connectors and 1 transistor. It belongs with the STM32 boards of this library.
Main components
4
LMV321
SOT-23-5L-2.75V~-1.25V、1.25V~2.75V 0℃~+70℃ 1 10pA 10pA 1MHz 2.1V~5.5V 20mA 20nV/√Hz@10kHz 520V/ms 60uA 70dB 800uV Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5L Operational Amplifier ROHSJiangsu Changjing Electronics Technology (CJ)Operational AmplifierGD25Q16CSJGR
SOP-8-208mil-40℃~+105℃ 100,000 cycles 120MHz 16Mbit 1uA 2.7V~3.6V 20 Years 600us SPI SOP-8-208mil NOR FLASH ROHSGigaDevice Semicon BeijingNOR FLASHMIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DMP6350S
SOT-23-55℃~+150℃ 1 P-Channel 1.17W 1.5A 206pF 3V 4.1nC@10V 550mΩ@4.5V 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdTemperature_Logger
Temperature Data Logger
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 6 | 1.0uF | SparkFun-Capacitor:C_0805_2012Metric | C2, C3, C4, C5, C6, C7 |
| 3 | LMV321 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3, U4, U5 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 10M | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 49.9K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 150K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x02 | SparkFun-Connector:1x02 | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03 | SparkFun-Connector:1x03 | J4 |
| 1 | Conn_01x06 | SparkFun-Connector:1x06 | J3 |
| 1 | DMP6350S | SparkFun-Semiconductor-Standard:SOT23-3 | Q1 |
| 1 | GD25Q16CSJGR | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | STM32F030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Omron_B3FS | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
Questions
What parts does the TEMP LOGGER use?
37 parts, built around the LMV321, GD25Q16CSJGR, MIC5504-3.3YM5 and DMP6350S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TEMP LOGGER KiCad files?
From the urielzbee/Temperature_Logger repository on GitHub, at the commit this page was made from: the board is HW/TEMP_LOGGER/TEMP_LOGGER.kicad_pcb and its schematic HW/TEMP_LOGGER/TEMP_LOGGER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TEMP LOGGER design in my own project?
Its repository states no licence, so its author keeps all rights: ask urielzbee before reusing the design.
Similar boards
- 4 layers40 × 60 mm
Control board v2.0
0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements
106 parts151MIT - 2 layers165.8 × 130.8 mm
YAEMK
KarlK90/yaemk-split-kb
5x8 Split keyboard with thumb-clusters, rotary encoders and oleds.
218 parts128GPL-3.0 - 2 layers53.5 × 101.8 mm
Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.
135 parts69 - 4 layers100 × 100 mm
- 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 4 layers44 × 44 mm
- 2 layers143.9 × 118.7 mm
Cantaloupe
Kaleidogeist/Cantaloupe
~60% QMK-compatible Split Ergonomic Keyboard
121 parts32CERN-OHL-S-2.0