Skip to the content
2 layers143.9 × 118.7 mmCantaloupe, the printed circuit board in 3D

~60% QMK-compatible Split Ergonomic Keyboard

Size
143.9 × 118.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
121
Nets
101
Pads
905
Tracks, vias
769, 146
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
27 Sep 2020
Updated
22 Oct 2024

Overview

Cantaloupe is an open-source printed circuit board by Kaleidogeist, from the Kaleidogeist/Cantaloupe repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 143.9 × 118.7 mm with 121 parts on 101 nets, routed with 769 tracks and 146 vias.

It is built around the LMV321, SRV0504 and XC6206P332MR, with the AO3401A among its other parts. Its parts include 33 diodes, 32 switches, 18 resistors, 15 capacitors and 5 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.

Main components

4

README

README.md

Cantaloupe

~60% QMK-compatible split ergonomic keyboard.

Disclaimer

This keyboard is licensed under CERN-OHL-S-2.0. The layout is based on the Ergodash layout with the inner-most keys removed and an improved thumb cluster. The layout was only used as a reference, nothing was copied and the board is a completely new design. In addition, design cues from the YAEMK were used in this design.

Key Features

  • Ergonomic 30-key layout including pinky stagger and arrow keys.
  • MX switches with kailh hot-swap sockets.
  • 100% reversible design which means only a single board is needed for both sides.
  • 0.96" 128x64 SSD1306 OLED support.
  • Two rotary encoders supported above the thumb cluster, one on each side.
  • Support for the Pimoroni trackball module is also available, replacing one rotary encoder slot.
  • On-board ARM STM32F401CCU6 processor.
  • USB-C input and split connect ports with full ESD protection.
  • SWD breakout header for an alternate means of programming the board.

Cantaloupe Front Render Cantaloupe PCB Cantaloupe PCB Zoomed Cantaloupe Schematic

Changelog

  • 22/10/2024: License updated to CERN-OHL-S-2.0.
  • 14/5/2022: Added silkscreen jumper guides. Connected indicator LED to spare GPIO. Updated images.
  • 13/5/2022: Finalized firmware. Added custom graphic to OLED display. Updated 3DP case and BOM. Removed CNC case. Fixed error with silkscreen. Added silkscreen jumper guides.
  • 15/2/2022: Revised 3DP and CNC case designs.
  • 13/2/2022: Added tentative designs for CNC and 3D printed cases.
  • 11/2/2022: Clean up of design. New images. Added gerbers and files for FR4 plates.
  • 9/2/2022: Changed pin assignments so B2 isn't used. Added pull-up for RX pin and pull-down for B2 pin so the keyboard can properly load into the bootloader. Changed reset circuit so it actually works. Removed USB series resistors. Removed non-functional JTAG pins. Changed SRV05-04 to SRV0504. Thanks to sigprof and MasterSpoon from the QMK discord server for the help!
  • 8/2/2022: Removed holes in middle of PCB. Added top and bottom plate DXF files, as well as a tentative STEP file for a CNC case.
  • 25/1/2022: Did some rerouting, increased clearances and via size.
  • 21/1/2022: Changed CPU to STM32F4x1CxUx (lets me steal them from Black Pill boards). Added plate and base gerber files. Changed BOM to reflect changes.
  • 20/1/2022: Cleaned up read-me. Rearranged location of mounting holes and changed size of holes. Rerouted some traces. Cleaned up silkscreen. Added DXF files for plate and base. Changed images. Added BOM.
  • 19/1/2022: New V2.0 version. On-board ARM STM32F303 processor, kailh hot-swap, ESD protection, 0.96" OLED, trackball and rotary encoder. 100% reversible design which means only a single board is needed for both sides. Plenty of design cues taken from the YAEMK. Pinky stagger added.

Parts

121
QtyValueFootprintReferences
32DAriamelon:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16
30MXAriamelon:MXOnly-1U-Hotswap-DualSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +14
8100nCapacitor_SMD:C_0603_1608MetricC1, C3, C4, C8, C9, C11, C13, C14
710kResistor_SMD:R_0603_1608MetricR1, R7, R8, R10, R12, R16, R18
410uCapacitor_SMD:C_0603_1608MetricC2, C5, C6, C7
2100kResistor_SMD:R_0603_1608MetricR4, R13
220pCapacitor_SMD:C_0603_1608MetricC10, C12
25k1Resistor_SMD:R_0603_1608MetricR5, R6
2SRV0504Package_TO_SOT_SMD:SOT-23-6U2, U3
1100Resistor_SMD:R_0603_1608MetricR9
110uInductor_SMD:L_0603_1608MetricL1
11AFuse:Fuse_1206_3216MetricF2
11MResistor_SMD:R_0603_1608MetricR11
11kResistor_SMD:R_0603_1608MetricR3
1200kResistor_SMD:R_0603_1608MetricR14
1220Resistor_SMD:R_0603_1608MetricR17
12N7002Package_TO_SOT_SMD:SOT-23Q1
12k2Resistor_SMD:R_0603_1608MetricR15
1330kResistor_SMD:R_0603_1608MetricR2
14.7uCapacitor_SMD:C_0603_1608MetricC15
1500mAFuse:Fuse_1206_3216MetricF1
18MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1AO3401APackage_TO_SOT_SMD:SOT-23Q2
1ArtAriamelon:CatmelonA1
1DebugAriamelon:Debug_JTAG_SWDJ4
1EncoderAriamelon:EC11_FlippableSW31
1LMV321Package_TO_SOT_SMD:SOT-23-5U5
1LinkAriamelon:USB-C-C168688J3
1Link+_LJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP6
1Link+_RJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP4
1Link-_LJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP5
1Link-_RJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP3
1MXAriamelon:Switch_TS24CA_FlippableSW32
1OLEDAriamelon:OLED_0.96_SSD1306_128x64_FlippableJ2
1PowerAriamelon:LED_0603_1608Metric_FlippableD32
1STM32F4x1CxUxPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU1
1Side_LJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2
1Side_RJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1TrackballAriamelon:pimoroni_trackball_flippableJ5
1USB_InAriamelon:USB-C-C168688J1
1XC6206P332MRPackage_TO_SOT_SMD:SOT-23U4

Similar boards

  • 2 layers165.8 × 130.8 mmYAEMK, the printed circuit board in 3D

    YAEMK

    KarlK90/yaemk-split-kb

    5x8 Split keyboard with thumb-clusters, rotary encoders and oleds.

    218 parts128GPL-3.0
  • 2 layers45 × 45 mmAkaLinkPro, the printed circuit board in 3D

    AkaLinkPro

    akkako/akaLinkPro

    akaLinkPro 是一个基于 HPM5300 的高性能 CMSIS-DAP 调试器。

    95 parts11Apache-2.0
  • 2 layersDigital volume, the printed circuit board in 3D

    Digital volume

    barrybridges68/assorted_audio_projects

    Assorted audio projects, most in working state

    97 partsGPL-3.0
  • 2 layers192.2 × 150.5 mmDjinn, the printed circuit board in 3D

    Djinn

    tzarc/keyboards

    @tzarc's custom keyboard designs.

    292 parts993CERN-OHL-S-2.0
  • 4 layers56 × 43.3 mmStepperServoCAN, the printed circuit board in 3D

    StepperServoCAN

    dzid26/StepperServo-hardware

    Stepper actuator controller

    155 parts29GPL-3.0
  • 4 layers89.8 × 64 mmStinger V2.0, the printed circuit board in 3D

    Stinger V2.0

    Project-Stinger/Electronics

    Electronics for Stinger foam dart blasters

    126 parts4
  • 4 layers63.6 × 86 mmBECom, the printed circuit board in 3D

    BECom

    rjsc/BECom

    BECom - Battery Emulator Companion - Open Source Hardware, designed to run dalathegreat/Battery-Emulator

    276 parts2GPL-3.0
  • 4 layers90 × 95 mmWiegand bridge, the printed circuit board in 3D

    Wiegand bridge

    EdgeCoil/wiegand-bridge

    ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.

    197 parts1

Questions

How big is the Cantaloupe PCB?

It measures 143.9 × 118.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cantaloupe use?

121 parts, built around the LMV321, SRV0504, XC6206P332MR and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cantaloupe KiCad files?

From the Kaleidogeist/Cantaloupe repository on GitHub, at the commit this page was made from: the board is PCB/Cantaloupe.kicad_pcb and its schematic PCB/Cantaloupe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cantaloupe design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).