4 layers105.6 × 105.6 mm
4 layers100 × 100 mm
PCBA OCTV
intechstudio/grid-hardware59- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 403
- Nets
- 293
- Pads
- 1,234
- Tracks, vias
- 3,338, 368
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Feb 2019
- Updated
- 7 Nov 2026
Overview
PCBA OCTV is an open-source printed circuit board by intechstudio, from the intechstudio/grid-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 100 mm with 403 parts on 293 nets, routed with 3,338 tracks and 368 vias.
It is built around the RP2040, ESP32-S3 and HAL49ESO, with the LMV321, W25Q64JVSSIQ and 74HC165D among its other parts. Its parts include 135 resistors, 134 capacitors, 45 ICs, 21 diodes and 16 connectors. It belongs with the ESP32 and RP2040 boards of this library.
Main components
12
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
HAL49ESO
SOT-23-3L-40℃~+85℃ 2mV/Gs 3V~6.5V 3mA ±0.007% ±100mT SOT-23-3L Linear Hall Sensors ROHSHallweeLinear Hall Sensors
LMV321
SOT-23-5L-2.75V~-1.25V、1.25V~2.75V 0℃~+70℃ 1 10pA 10pA 1MHz 2.1V~5.5V 20mA 20nV/√Hz@10kHz 520V/ms 60uA 70dB 800uV Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5L Operational Amplifier ROHSJiangsu Changjing Electronics Technology (CJ)Operational Amplifier
W25Q64JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 150ms@(64KB) 2.7V~3.6V 20 Years 3ms 64Mbit SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers
BL1551B
SC-70-6-40℃~+125℃ 1 1.8V~5.5V 15.5pF 2.7Ω@5.0V 20ns 2:1 30ns 350MHz SC-70-6 Analog Switches, Multiplexers ROHSBLAnalog Switches, Multiplexers
74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers
IP4220CZ6-HXY
SOT-23-6L0.4pF、0.8pF 1uA 4A 5V 6V 8.5V ESD Four channels IEC 61000-4-2 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSHXY MOSFETESD And Surge Protection (TVS/ESD)
74LVC1G08Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V、2V 2 2.4V、3.8V 32mA 32mA 4ns@5V,50pF 550mV、800mV 700mV、800mV 74LVC Series AND Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic GatesLN1134A332MR-G
SOT-23-5-40℃~+85℃ 1 180mV@(100mA) 3.3V 300mA 60dB@(1kHz) 70uA 7V Fixed Over Current Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNATLINEARVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
XL-0807RGBC-2812B-S
SMD-4P,2x1.8mmUncategorisedXINGLIGHT
README
README.mdOpen-Source Hardware
https://certification.oshwa.org/hu000001.html
Licence: GPL3
Mechanical components
| Component | Part number | Type | Preview | Links |
|---|---|---|---|---|
| Lower housing | PLASTIC-CANVAS | Fabricated |  | [Model tree] [Download] |
| Mapmode button | PLASTIC-MAPMODE | Fabricated |  | [Download] |
| Magnet cover | PLASTIC-MAGNET-COVER | Fabricated |  | [Download] |
| Rubber foot | RUBBER-FOOT | Fabricated |  | [Download] |
| Zona arch | PLASTIC-ZONA-ARCH | Fabricated |  | [Download] |
| Rubber spacer | RUBBER-SPACER | Fabricated |  | [Download] |
| D3x14mm N52 neodymium | MAGNET-D3x14 | Fabricated |  | [Download] |
| 3x3x3mm N52 neodymium | MAGNET-SQ3 | Fabricated |  | [Download] |
| Crown | SPACER | Fabricated |  | [Download] |
| Metric corner screw | SCREW-M1.6x16 | Purchased |  | [Download] |
| Metric PCB screw | SCREW-M1.6x8 | Purchased |  | [Download] |
| Metric PCB screw | SCREW-M1.6x5-C | Purchased |  | [Download] |
| Brass threaded insert 3mm | INSERT-M1.6x2.5x3 | Purchased |  | [Download] |
| Brass threaded insert 4mm | INSERT-M1.6x2.5x4 | Purchased |  | [Download] |
| Lightpipe | PLASTIC-LIGHTPIPE | Purchased |  | [Download] |
| Encoder Knob Injection | PLASTIC-KNOB-ENC | Fabricated |  | [Download] |
| Potmeter Knob Injection | PLASTIC-KNOB-POT | Fabricated |  | [Download] |
| Encoder | THT-ENC | Purchased |  | [Download] |
| Potmeter | THT-POT | Purchased |  | [Download] |
| Fader | THT-FADER | Purchased |  | [Download] |
| Long Fader | THT-LONGFADER | Purchased |  | [Download] |
| Fader Cap | PLASTIC-CAP-FADER | Purchased |  | [Download] |
| Fader Insert | INSERT-FADER | Fabricated |  | [Download] |
| Button | THT-BUTTON | Purchased |  | [Download] |
| Button Cap | PLASTIC-CAP-BUTTON | Purchased |  | [Download] |
| Hall Switch | THT-HALL-SWITCH | Purchased |  | [Download] |
| Low Profile Keycap | PLASTIC-LOW-PROFILE-KEYCAP | Purchased |  | [Download] |
| Battery Connector | SMT-CONN-BATTERY | Purchased |  | [Download] |
| Pogo Connector | SMT-CONN-POGO | Purchased |  | [Download] |
TEK2 specific components
| Component | Part number | Type | Preview | Links |
|---|---|---|---|---|
| Knob TEK2 | KNOB-TEK2 | Fabricated |  | [Download] |
| Knob interface TEK2 | PLASTIC-TEK2-KNOB-INTERFACE | Fabricated |  | [Download] |
| Endless potentiometer | THT-ENDLESSPOT | Purchased |  | [Download] |
VSN1 specific components
| Component | Part number | Type | Preview | Links |
|---|---|---|---|---|
| VSN1 Display | SMT-VSN1-DISPLAY | Purchased |  | [Download] |
| VSN1 Display interface | PLASTIC-VSN1-DISPLAY-INTERFACE | Fabricated |  | [Download] |
| VSN1 Button | PLASTIC-VSN1-BUTTON | Fabricated |  | [Download] |
PCB Frontpanel
| Component | Part number | Preview | Links |
|---|---|---|---|
| XX16 Frontpanel | FP-XX16 |  | [STEP] [PCB3D] [Gerber] |
| BU16 Frontpanel | FP-BU16 |  | [STEP] [PCB3D] [Gerber] |
| PBF4 Frontpanel | FP-PBF4 |  | [STEP] [PCB3D] [Gerber] |
| EF44 Frontpanel | FP-EF44 |  | [STEP] [PCB3D] [Gerber] |
| TEK2 Frontpanel | FP-TEK2 |  | [STEP] [PCB3D] [Gerber] |
| VSN1-L Frontpanel | FP-VSN1-L |  | [STEP] [PCB3D] [Gerber] |
| VSN1-R Frontpanel | FP-VSN1-R |  | [STEP] [PCB3D] [Gerber] |
| VSN2 Frontpanel | FP-VSN2 |  | [STEP] [PCB3D] [Gerber] |
| OCTV Frontpanel | FP-OCTV |  | [STEP] [PCB3D] [Gerber] |
| ZONA Frontpanel | FP-ZONA |  | [STEP] [PCB3D] [Gerber] |
| ZONA SPACER Frontpanel | FP-ZONA-SPACER |  | [STEP] [PCB3D] [Gerber] |
| ZONA Decor Frontpanel | FP-ZONA-DECOR |  | [STEP] [PCB3D] [Gerber] |
PCB Frontpanel Collaborations
| Component | Part number | Preview | Links |
|---|---|---|---|
| BU16 MIDIGrade Frontpanel | FP-BU16-MIDIGRADE |  | [STEP] [PCB3D] [Gerber] |
| BU16 MIDIGrade Frontpanel | FP-EN16-MIDIGRADE |  | [STEP] [PCB3D] [Gerber] |
| PBF4 Classic Frontpanel | FP-PBF4-CLASSIC |  | [STEP] [PCB3D] [Gerber] |
| TEK2 Classic Frontpanel | FP-TEK2-CLASSIC |  | [STEP] [PCB3D] [Gerber] |
| XX16 Test Frontpanel | FP-XX16-TEST |  | [STEP] [PCB3D] [Gerber] |
Electrical components
Packaging
| Component | Part number | Preview | Links |
|---|---|---|---|
| PO16 Sleeve | PACKAGING-SLEEVE-PO16 |  | [PDF] |
| BU16 Sleeve | PACKAGING-SLEEVE-BU16 |  | [PDF] |
| PBF4 Sleeve | PACKAGING-SLEEVE-PBF4 |  | [PDF] |
| EN16 Sleeve | PACKAGING-SLEEVE-EN16 |  | [PDF] |
| EF44 Sleeve | PACKAGING-SLEEVE-EF44 |  | [PDF] |
| TEK2 Sleeve | PACKAGING-SLEEVE-TEK2 |  | [PDF] |
| VSN1-L Sleeve | PACKAGING-SLEEVE-VSN1-L |  | [PDF] |
| VSN1-R Sleeve | PACKAGING-SLEEVE-VSN1-R |  | [PDF] |
Desktop Tools Used
- FreeCAD
- KiCAD
Command-Line Tools Used
- PytonOCC
- OpenSCAD
- KiBOT
Parts
403| Qty | Value | Footprint | References |
|---|---|---|---|
| 115 | 100n | suku_basics:CAP_0402 | C1001, C1002, C1003, C1004, C1005, C1006, C1007, C1008, C1009, C1010, C1011, C1012, C1013, C1014, C1015, C1016 +99 |
| 52 | 5k1 | suku_basics:RES_0402 | R1019, R1020, R1021, R1022, R1025, R1026, R1027, R1028, R1031, R1032, R1033, R1034, R1037, R1038, R1039, R1040 +36 |
| 29 | 10k | suku_basics:RES_0402 | R1017, R1018, R1023, R1024, R1029, R1030, R1035, R1036, R1041, R1042, R1047, R1048, R1053, R1054, R1059, R1060 +13 |
| 26 | 15k | suku_basics:RES_0402 | R608, R609, R612, R613, R620, R621, R624, R625, R628, R629, R632, R633, R636, R637, R648, R649 +10 |
| 21 | XL-0807RGBC-2812B-S | suku_basics:UI_LED_RGB_2020 | D901, D902, D903, D904, D905, D906, D907, D909, D1001, D1002, D1005, D1006, D1008, D1009, D1011, D1012 +5 |
| 18 | 1k | suku_basics:RES_0402 | R1001, R1002, R1003, R1004, R1005, R1006, R1007, R1008, R1009, R1010, R1011, R1012, R1013, R1014, R1015, R1016 +2 |
| 13 | C2905169 | suku_basics:gateron-low-profile | SW1001, SW1002, SW1003, SW1004, SW1005, SW1006, SW1007, SW1008, SW1009, SW1010, SW1011, SW1013, SW1015 |
| 13 | HAL49ESO | suku_basics:SOT-23W | U1003, U1004, U1005, U1006, U1007, U1008, U1009, U1010, U1011, U1012, U1013, U1015, U1017 |
| 13 | LMV321 | suku_basics:SOT-23-5 | U609, U610, U612, U613, U614, U615, U616, U619, U620, U621, U622, U623, U624 |
| 11 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP701, TP702, TP703, TP704, TP706, TP707, TP708, TP709, TP1001, TP1002, TP1003 |
| 9 | 1u | suku_basics:CAP_0402 | C602, C603, C733, C734, C746, C754, C755, C758, C1062 |
| 8 | Conn_01x04 | suku_basics:J_INTERFACE_SPRINGPATTERN | J501, J502, J503, J504, J505, J506, J507, J508 |
| 8 | ED1115S-20P-20C-13.5F/LAL/N=5/F=7 | suku_basics:UI_ENCODER_SONGHUEI | UI1001, UI1002, UI1003, UI1004, UI1005, UI1006, UI1007, UI1008 |
| 6 | 33R | suku_basics:RES_0402 | R1067, R1068, R1069, R1070, R1071, R1072 |
| 5 | 74HC165 | suku_basics:SOIC-16_74HC165 | U801, U1014, U1016, U1018, U1019 |
| 4 | BL1551B | suku_basics:SOT-363_SC-70-6 | U605, U606, U607, U608 |
| 4 | SMTSO1625MTJ | suku_basics:SMD_NUT_M1.6x2.5 | J602, J603, J605, J1008 |
| 3 | 0R | suku_basics:RES_0402 | R604, R605, R1066 |
| 2 | 10p | suku_basics:CAP_0402 | C748, C750 |
| 2 | 10u | suku_basics:CAP_0402 | C743, C1030 |
| 2 | 1n | suku_basics:CAP_0402 | C1066, C1069 |
| 2 | 74HC4051 | suku_basics:SOIC-16_74HC4051 | U1001, U1002 |
| 2 | BLM15AG102SN1D | suku_basics:FERRIT_0402 | L1002, L1003 |
| 2 | C2905169 | suku_basics:SW_SPST_CK_RS282G05A3 | SW702, SW703 |
| 2 | C5451661 | suku_basics:SOT-23-6 | U602, U603 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP705, TP710 |
| 1 | (NF) | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1001 |
| 1 | 10n | suku_basics:CAP_0402 | C753 |
| 1 | 1M | suku_basics:RES_0402 | R601 |
| 1 | 1n8 | suku_basics:IND_0402 | L701 |
| 1 | 1p8 | suku_basics:CAP_0402 | C742 |
| 1 | 3p9 | suku_basics:CAP_0402 | C739 |
| 1 | 40MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y701 |
| 1 | 4n7 | suku_basics:CAP_0402 | C601 |
| 1 | 74LVC1G08 | suku_basics:SOT-23-5-AND-TSSOP5 | U604 |
| 1 | BLM15PD121SN1D | suku_basics:FERRIT_0402 | L1001 |
| 1 | C255807 | suku_basics:SW_HYP_MAPMODE | SW701 |
| 1 | C5137195 | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J701 |
| 1 | Conn_01x02 | suku_basics:OscilloscopeGround | J799 |
| 1 | Conn_01x08 | suku_basics:grid_outline_octv | M501 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J702 |
| 1 | D+ | TestPoint:TestPoint_Pad_D1.0mm | TP605 |
| 1 | D- | TestPoint:TestPoint_Pad_D1.0mm | TP604 |
| 1 | ESP32-S3 | suku_basics:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U704 |
| 1 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP601 |
| 1 | GZ2012D601TF | suku_basics:FERRIT_0805 | L702 |
| 1 | LN1134A332MR-G | suku_basics:SOT-23-5 | U601 |
| 1 | NS4168_C910588 | suku_basics:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U1020 |
| 1 | OSHWA | suku_basics:OSHWA | LOGO701 |
| 1 | RP2040 | suku_basics:RP2040_QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U703 |
| 1 | Speaker | suku_basics:speaker-1609_octv | LS1001 |
| 1 | TYPE-C-32-M-12 | suku_basics:USB_C_Korean_Hroparts_TYPE-C-31-M-12 | J601 |
| 1 | UI | TestPoint:TestPoint_Pad_D1.0mm | TP602 |
| 1 | VB | TestPoint:TestPoint_Pad_D1.0mm | TP603 |
| 1 | W25Q64JVSSIQ | suku_basics:SOIC-8W_FLASH | U705 |
Questions
How big is the PCBA OCTV PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PCBA OCTV use?
403 parts, built around the RP2040, ESP32-S3, HAL49ESO and LMV321. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCBA OCTV KiCad files?
From the intechstudio/grid-hardware repository on GitHub, at the commit this page was made from: the board is Electrical/Design/PCBA-OCTV/PCBA-OCTV.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCBA OCTV design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from intechstudio/grid-hardware
12- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 2 layers97 × 97 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 2 layers95 × 95 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 2 layers100 × 100 mm
Similar boards
- 4 layers32.7 × 99.7 mm
Grid devkit
RustyCircuit/grid-devkit
KiCad PCB designed to interoperate with the Intech Studio Grid ecosystem. This devkit is a fork of Intech's VSNX hardware design, adapted to fill a gap between fully-developed hardware and breadboard/DIY controller…
167 parts1GPL-3.0 - 4 layers56 × 60 mm
PCBA KNOT
intechstudio/knot
Knot is the bridge between old-school MIDI gear like synthesizers, groove boxes, guitar pedals and neat USB MIDI devices.
111 parts58GPL-3.0 - 4 layers56 × 60 mm
- 2 layers56 × 71 mm
Wiz lite
Abean2k/Wiz-lite
A small, 2 player capable, ch552 based, game console with a 14x9 rgb led screen.
161 parts2MIT - 2 layers
Sih
arthithadee/Sonar_transmitter
AZHAI is a software-defined sonar transmitter firmware designed for autonomous underwater vehicles (AUVs).
73 parts - 4 layers99.8 × 65 mm
- 4 layers25 × 30 mm
RF CC1101-433
AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs
25 partsMIT - 2 layers91.2 × 48.3 mm
