Skip to the content
123

HAL49ESO

HallweeExtended

-40℃~+85℃ 2mV/Gs 3V~6.5V 3mA ±0.007% ±100mT SOT-23-3L Linear Hall Sensors ROHS

Part id
hallwee/HAL49ESO
Category
Linear Hall Sensors
Package
SOT-23-3L
Pins
3
In stock
33,795 at JLCPCB (C7420984)
Used on
2 open-source boards

Overview

The HAL49ESO is a linear Hall Sensor made by Hallwee in a SOT-23-3L package with 3 pins. -40℃~+85℃ 2mV/Gs 3V~6.5V 3mA ±0.007% ±100mT SOT-23-3L Linear Hall Sensors ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:CL6N5-G, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. 33,795 are in stock at JLCPCB (part C7420984). 2 open-source boards in 1 repository on GitHub use it.

Symbol

1VDD2GND3OUT
EasyEDA_Cloud:CL6N5-GFrom EasyEDA

Footprint

123
Package_TO_SOT_SMD:SOT-23-3From KiCad's library

From the datasheet

5
Supply, least
3 V · VDD, recommended operating min · p. 2
Supply, most
6.5 V · VDD, recommended operating max · p. 2
Supply, absolute maximum
8 V · VDD, absolute maximum · p. 2
Works from
-40 °C · ambient operating min · p. 2
Works up to
85 °C · ambient operating max · p. 2

Around it

2
cap 1nF/10V
between VDD and Gnd; C1 in the application circuit. · p. 3
cap 10nF/10V
between Out and Gnd; C2 in the application circuit. · p. 3

Specifications

8
ParameterConditionsAs printedPage
电源电压(工作时) VDDmax 8 V2
工作温度范围 TAmin -40 · max 85 °C2
工作电压 VDDTA = 25°C; 工作时min 3 · typ 5 · max 6.5 V2
输出电阻 ROTA = 25°C, VDD = 5Vtyp 40 · max 100 Ω2
最高输出电压TA = 25°C, VDD = 5V, B = 1200Gsmin 4.2 V2
灵敏度TA = 25°Cmin 1.7 · typ 2 · max 2.5 mV/Gs2
线性度typ -0.007 量程的%2
灵敏度温漂Ta ≥ 25°Cmin -0.15 · max 0.05 %/°C2

Pins, by the datasheet

2
2 Gnd
Ground. · p. 1
3 Out
Push-pull output. · p. 1

Ordering codes, by the datasheet

2
HAL49E SO
SO (SOT-23-3L) · Surface-mount package; minimum packing quantity 3000 pieces. · p. 4
HAL49E UA
UA (TO-92S) · Through-hole package; minimum packing quantity 1000 pieces. · p. 4

Open-source boards using it

2
  • 4 layers100 × 100 mmPCBA OCTV, the printed circuit board in 3D

    PCBA OCTV

    intechstudio/grid-hardware

    403 parts59GPL-3.0
  • 4 layers100 × 100 mmPCBA BU16, the printed circuit board in 3D

    PCBA BU16

    intechstudio/grid-hardware

    292 parts59GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HAL49ESO?

Yes. The symbol is EasyEDA_Cloud:CL6N5-G and the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HAL49ESO?

SOT-23-3L, with 3 pins. Its footprint is drawn on this page.

Where is the HAL49ESO datasheet?

Hallwee publishes it: the Datasheet link on this page opens it.

Where can I order the HAL49ESO?

JLCPCB lists it as part C7420984, with 33,795 in stock; the sellers' links on this page open their listings.

What can replace the HAL49ESO?

Parts like it in the library: the CC6103EST by Cross chip, the HAL9303RSO by Hallwee, the HAL403SO by Hallwee and the KTM1301SB-ST3 by CONNTEK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HAL49ESO?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.