
AppleSauce
upsidedownlabs/MSP430-Breadstick
Texas Instrument MSP430G2553 based development board.

Texas Instrument MSP430G2553 based development board.
CheeseDip is an open-source printed circuit board by upsidedownlabs, from the upsidedownlabs/MSP430-Breadstick repository on GitHub. It is a 2-layer board of 21.6 × 60 mm with 63 parts on 51 nets, routed with 485 tracks and 35 vias.
It is built around the MSP430G2553IPW28, CH340C and SS-3235S-L3. Its parts include 7 capacitors, 5 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the interfaces and adapters and microcontroller boards boards and the MSP430 boards of this library.
Upside Down Labs MSP430 Breadstick is a development board for ultra low power MSP430G2553 MCU from Texas Instruments.
Cheese Dip variant of MSP430 Breadstick comes with CH340C USB to UART bridge.
| Front | Back |
|---|---|
![]() | ![]() |
| Pinout |
|---|
![]() |
| Dimensions | Schematic |
|---|---|
60.00 x 21.60 mm![]() | ![]() |
Apple Sauce variant of MSP430 Breadstick comes with FT232RQ USB to UART bridge.
| Front | Back |
|---|---|
![]() | ![]() |
| Dimensions | Schematic |
|---|---|
65.786 x 18.542 mm![]() | ![]() |
CERN Open Hardware License Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0).
MIT open source license.

This work is licensed under a Creative Commons Attribution 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | buzzard_labels | , , , , , , , , , , , , , , , +15 | |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C6, C8 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7 |
| 2 | Conn_01x14 | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J2, J5 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1, SW3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Conn_02x06_Counter_Clockwise | udlabs:progMSP | J1 |
| 1 | Ferrite_Bead_Small | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | LOGO | udlabs:udlabs_6.0x4.5_LOGO_fs | G*** |
| 1 | LOGO | udlabs:cheeseDip_small | G*** |
| 1 | LOGO | udlabs:udlabs_18.1x3.8 | G*** |
| 1 | MSP430G2553IPW28 | udlabs:MSP430G2553IPW28 | IC1 |
| 1 | PWR LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | RX LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | SS-3235S-L3 | udlabs:SS-3235S-L3 | SW2 |
| 1 | TLV74033PDBVR / ME6211 | udlabs:TLV74033PDBVR | IC3 |
| 1 | TX LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | USR LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
The 61 most common of 63 parts.

upsidedownlabs/MSP430-Breadstick
Texas Instrument MSP430G2553 based development board.

upsidedownlabs/MSP430G2553-Feather
MSP430G2553 based Adafruit feather compatible board 🪶



artfulbytes/nsumo_hardware
A 2-layer PCB for a small sumobot including MSP430G2553, regulators, motor drivers, and IR receiver.

azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.



It measures 21.6 × 60 mm and has 2 copper layers, 1.6 mm thick.
63 parts, built around the MSP430G2553IPW28, CH340C and SS-3235S-L3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the upsidedownlabs/MSP430-Breadstick repository on GitHub, at the commit this page was made from: the board is CheeseDip/CheeseDip.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask upsidedownlabs before reusing the design.