

Slack
An ergonomic relaxing keyboard.
- Size
- 338.8 × 170.4 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 392
- Nets
- 553
- Pads
- 1,994
- Tracks, vias
- 234, 0
- Pours
- 56
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Mar 2026
- Updated
- 5 Nov 2026
Overview
Slack is an open-source printed circuit board by Dreamy-Jy, from the Dreamy-Jy/slack repository on GitHub. It is a 4-layer board of 338.8 × 170.4 mm with 392 parts on 553 nets, routed with 234 tracks and 0 vias.
It is built around the MDBT50Q-1MV2, IS31FL3733-QFLS4-TR and TPS61288LRQQR, with the MP2721GRH-0000-Z, LTST-FC12WEGBD-5A and SS-3235S-L3 among its other parts. Its parts include 179 diodes, 76 switches, 48 resistors, 47 capacitors and 5 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
Main components
12MDBT50Q-1MV2
SMD-61PSMD-61P Bluetooth Modules ROHSRAYTACBluetooth ModulesIS31FL3733-QFLS4-TR
VQFN-48-EP(6x6)-40℃~+125℃ 1MHz 2.7V~5.5V 28 46mA Built-in PWM Short Circuit Protection、LED open-circuit protection QFN-48-EP(6x6) LED Drivers ROHSISSILED DriversTPS61288LRQQR
VQFN-HR-11-40℃~+125℃@(TJ) 1 110uA 2V~18V 4.5V~18V 500kHz Adjustable Boost Boost Built-in Yes VQFN-HR-11 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMP2721GRH-0000-Z
QFN-22(2.5x3.5)-40℃~+125℃ 1 2.5V 3.9V~16V 4.2V 5A 8.5uA Charging IC I2C Lithium Battery Support QFN-22(2.5x3.5) Battery Management ROHSMonolithic Power SystemsBattery ManagementLTST-FC12WEGBD-5A
SMD-5P,1.2x1.2mm-20℃~+80℃ 1.7V~2.3V、2.5V~3.2V 120° 135mcd、210mcd、532.5mcd、675mcd 458nm、464nm、520nm、630nm 468nm、525nm、625nm 5mA Red, Emerald Green, Blue, White SMD-5P,1.2x1.2mm LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteSS-3235S-L3
SMD,9.1x3.6mm-40℃~+85℃ 10000 times 12V 3.55mm 50mA 6.6mm 9.1mm Black DPDT Rectangular Columnar SMD(SMT) Tab Surface Mount,Vertical SMD,9.1x3.6mm Slide Switches ROHSXKB ConnectionSlide SwitchesBTSA-L-S-8
SMD,5.8x5.8mm-20℃~+70℃ 10,000 Cycles 12V 2.5N 50mA Latching SMD(SMT) Tab Square Button Surface Mount,Vertical White Without SMD,5.8x5.8mm Pushbutton Switches ROHSROCPU SwitchesPushbutton SwitchesPEC11S-929K-S0015
SMD-40℃~+70℃ 10mA 30/15 5V Incremental Support Two-phase output Vertical welding SMD Rotary Encoders ROHSBournsRotary EncodersEC10E1220505
插件插件 Rotary Encoders ROHSALPSALPINERotary Encoders2TED3M6RES
插件-20℃~+85℃ 17.62mm 40,000 Cycles 5mm 9.5mm Cylinder Lever DPDT PC Pin Right Angle 插件 Toggle Switches ROHSDailywellToggle SwitchesAON7423
DFN-8(3x3)-55℃~+150℃ 1 P-Channel 100nC@4.5V 200mV 20V 4.9mΩ@2.5V 5.626nF 50A 716pF 83W 928pF P-Channel DFN-8(3x3) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsEXC14CE900U
SMD-4P,0.8x0.6mm-40℃~+85℃ 125V 130mA 2 2.5Ω 5V 90Ω@100MHz SMD-4P,0.8x0.6mm Common Mode Filters ROHSPanasonicCommon Mode Filters
README
README.mdThis is a repo containing all docs related to Slack, a custom plank style keyboard meant for being used while relaxing.
There are 2 prototype revisions planned, each one getting closer to my ideal. Experimental modules will be hosted here as well.
Any revisions pass the second revision will be for refinements.
Parts
392| Qty | Value | Footprint | References |
|---|---|---|---|
| 96 | LTST-FC12WEGBD-5A | Liteon:LTSTFC12WEGBD5A | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +80 |
| 78 | BAS16TS | Diode_SMD:D_SOD-523 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +62 |
| 58 | MSwitch | Cherry:Cherry_ULP_SMD | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW23, SW24, SW25 +42 |
| 25 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R10, R12, R13, R14, R15, R16, R26, R33, R34, R35, R36, R37, R38 +9 |
| 14 | MountingHole_2.2mm_M2_Pad_Via | MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13, H14 |
| 12 | 0.01μF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C17, C18, C19, C20 |
| 10 | SS-3235S-L3 | XKB Connection:SS3235SL3 | SW65, SW66, SW67, SW68, SW69, SW74, SW75, SW76, SW77, SW78 |
| 9 | 10μF | Capacitor_SMD:C_0805_2012Metric | C40, C41, C49, C50, C51, C52, C53, C54, C55 |
| 8 | 0.1μF | Capacitor_SMD:C_0402_1005Metric | C23, C25, C28, C30, C32, C35, C42, C48 |
| 8 | 0.47μF | Capacitor_SMD:C_0805_2012Metric | C22, C24, C27, C29, C31, C33, C34, C36 |
| 5 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6 |
| 4 | 100kΩ | Resistor_SMD:R_0805_2012Metric | R42, R43, R46, R47 |
| 4 | 10kΩ ≤1% | Resistor_SMD:R_0805_2012Metric | R60, R61, R63, R65 |
| 4 | BTSA-L-S-8 | ROCPU Switches:BTSA-L-S-8 | SW70, SW71, SW72, SW73 |
| 4 | PEC11S-929K-S0015 | Bourns:PEC11S929KS0015 | RE1/SW7, RE2/SW8, RE3/SW21, RE4/SW22 |
| 3 | 22μF | Capacitor_SMD:C_0805_2012Metric | C37, C38, C39 |
| 2 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R58, R59 |
| 2 | 1kΩ | Resistor_SMD:R_01005_0402Metric | R52, R53 |
| 2 | 22kΩ | Resistor_SMD:R_0201_0603Metric | R41, R45 |
| 2 | 22μF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C21, C26 |
| 2 | 3.6V | Diode_SMD:D_SOD-123 | D88, D89 |
| 2 | 5.1kΩ ≤1% | Resistor_SMD:R_0805_2012Metric | R49, R51 |
| 2 | EC10E1220505 | ALPS Electric:EC10E1220505 | RE5, RE6 |
| 2 | IS31FL3733-QFLS4-TR | Lumissil Microsystems:QFN40P600X600X80-49N-D | IC3, IC4 |
| 2 | LED_Small_Filled | LED_SMD:LED_0805_2012Metric | D87, D90 |
| 2 | SW_Push | ALPS Electric:SKQGAKE010 | SW8, SW58 |
| 1 | 100kΩ | Resistor_SMD:R_1206_3216Metric | R44 |
| 1 | 10kΩ @ 25°C | Vishay Intertech:NTCLE413E2103F102L | TH1 |
| 1 | 15kΩ | Resistor_SMD:R_0402_1005Metric | R56 |
| 1 | 1kΩ | Resistor_SMD:R_1206_3216Metric | R48 |
| 1 | 1μF | Capacitor_SMD:C_0402_1005Metric | C43 |
| 1 | 1μH | Inductor_SMD:L_Changjiang_FTC404030S | L1 |
| 1 | 2.20μF | Capacitor_SMD:C_0603_1608Metric | C44 |
| 1 | 2.20μH | Inductor_SMD:L_Sunlord_MWSA1005S | L2 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C45 |
| 1 | 22kΩ ≤1% | Resistor_SMD:R_0805_2012Metric | R64 |
| 1 | 22kΩ | Resistor_SMD:R_0402_1005Metric | R50 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C47 |
| 1 | 2TED3M6RES | Dailywell:2TED3M6RES | SW7 |
| 1 | 3kΩ | Resistor_SMD:R_0603_1608Metric | R55 |
| 1 | 4.7kΩ ≤1% | Resistor_SMD:R_0805_2012Metric | R62 |
| 1 | 4.7μF | Capacitor_SMD:C_0805_2012Metric | C46 |
| 1 | AON7423 | Alpha & Omega Semiconductor:AON7423 | Q1 |
| 1 | EXC14CE900U | Panasonic:EXC14CE900U | FL1 |
| 1 | Female JST-SH | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | MDBT50Q-1MV2 | RF_Module:Raytac_MDBT50Q | U1 |
| 1 | MP2721GRH-0000-Z | Monolithic Power Systems:QFN-22_MP2721_MNP | IC2 |
| 1 | SW_Push | XKB Connection:TC-1109-C-E | SW59 |
| 1 | TPS61288LRQQR | Texas Instruments:PTPS61288RQQR | IC1 |
| 1 | USB4105-GF-A-120 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | STMicroelectronics:SOT95P280X145-6N | D0 |
| 1 | XT30PW-M | Amass:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal_Tight | J2 |
The 388 most common of 392 parts.
More from Dreamy-Jy/slack
3- 2 layers326 × 172.6 mm

- 2 layers47 × 47.6 mm

- 2 layers60.2 × 46.9 mm

Similar boards
- 4 layers70.1 × 50.9 mm

Flight computer
Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects
121 parts17 - 2 layers180.5 × 133.5 mm

Nrsk right
0x0c/spltnrskb
KLE レイアウト(kle/left.json、kle/right.json)から生成した、左右分割・有線接続のキーボード基板です。 KiCad 10 のプロジェクト(回路図と配線済み基板)、製造用ガーバー、BOM、QMK ファームウェア設定を含みます。筐体のデータ(アクリルのレーザーカット用 DXF/SVG と 3D プリント用 STL)も入っています。
135 parts1 - 2 layers120 × 100 mm

Enose PCB
Tobias66662/Bachelor-Project-PCB-Designs
PCB to be used in the Enose (for Bachelor Project)
157 parts1 - 2 layers70 × 72 mm

- 2 layers21.6 × 60 mm

CheeseDip
upsidedownlabs/MSP430-Breadstick
Texas Instrument MSP430G2553 based development board.
63 parts22 - 2 layers52.9 × 22.9 mm

MSP430G2553-Feather
upsidedownlabs/MSP430G2553-Feather
MSP430G2553 based Adafruit feather compatible board 🪶
76 parts10 - 2 layers65 × 30 mm

- 4 layers67.2 × 58.2 mm

Questions
How big is the Slack PCB?
It measures 338.8 × 170.4 mm and has 4 copper layers, 1.57 mm thick.
What parts does the Slack use?
392 parts, built around the MDBT50Q-1MV2, IS31FL3733-QFLS4-TR, TPS61288LRQQR and MP2721GRH-0000-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Slack KiCad files?
From the Dreamy-Jy/slack repository on GitHub, at the commit this page was made from: the board is hardware/v1-electronics/slack.kicad_pcb and its schematic hardware/v1-electronics/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Slack design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dreamy-Jy before reusing the design.