Skip to the content
2 layers100 × 100 mmSubPCB, the printed circuit board in 3D
Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
113
Pads
296
Tracks, vias
270, 12
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Nov 2024
Updated
12 Nov 2024

Overview

SubPCB is an open-source printed circuit board by UnknownSP, from the UnknownSP/MedalGame_GINGAAAN_PCB repository on GitHub. It is a 2-layer board of 100 × 100 mm with 69 parts on 113 nets, routed with 270 tracks and 12 vias.

It is built around the TLP222AF and TLP785F. Its parts include 19 resistors, 18 ICs and 7 capacitors.

Main components

2

Parts

69
QtyValueFootprintReferences
19R_1608Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 +3
9TLP222APackage_DIP:DIP-4_W7.62mmU10, U11, U12, U13, U14, U15, U16, U17, U18
8TLP785Package_DIP:DIP-4_W7.62mmU2, U3, U4, U5, U6, U7, U8, U9
4CPKAZAAAN:CC1, C2, C3, C4
4Conn_3pKAZAAAN:Conn_3pinJ_C5V_I1, J_C5V_O1, J_P5V_I1, J_P5V_O1
4MountingHole_3.2mm_M3_ISO7380_PadMountingHole:MountingHole_3.2mm_M3_ISO7380_PadREF1, REF1, REF1, REF1
4NH_4pKAZAAAN:Conn_4pinJ_P24V_I1, J_P24V_O1, J_PG_O1, J_PG_O2
3CKAZAAAN:CC5, C6, C7
2NH_10pKAZAAAN:Conn_10pinJ_CG_O1, J_IN_1
2NH_2pKAZAAAN:Conn_2pinJ_P12V_I1, J_P12V_O1
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmRESET_SW, USER_SW
1Conn_4pKAZAAAN:Conn_4pinJ_CAN1
1Jump_3pKAZAAAN:Conn_3pinJ_CAN_TM1
1LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderCir_Pwr_D
1MCP2562-E-PPackage_DIP:DIP-8_W7.62mmU38
1NH_5pKAZAAAN:Conn_5pinJ_UART1
1NH_6pKAZAAAN:Conn_6pinJ_CD_O1
1NH_8pKAZAAAN:Conn_8pinJ_IN_2
1NUCLEO-F446RENUCLEO-F446RE_LIB:MODULE_NUCLEO-F446REU_STM1

Similar boards

  • 2 layers68 × 86.9 mmNBoxRpi, the printed circuit board in 3D

    NBoxRpi

    trihome/RasPi_NervesBOX

    An extension platform for the Raspberry Pi that mimics the functionality of a PLC.

    95 parts5CC-BY-SA-4.0
  • 2 layers100.3 × 99.3 mmMiatuino, the printed circuit board in 3D

    Miatuino

    Maverick765/miatuino

    まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。

    121 parts1GPL-2.0
  • 4 layers85 × 45 mmPoc 4cell, the printed circuit board in 3D

    Poc 4cell

    cajt/poc-scp-ft-4s-bms-app

    Proof of concept fault tolerant SCP with a BMS Application.

    85 partsBSD-2-Clause
  • 2 layers81.3 × 63.5 mmPowerboard, the printed circuit board in 3D

    Powerboard

    ctake1235/2024PowerBoard

    28 parts
  • 2 layers21 × 37.3 mmHeimdall, the printed circuit board in 3D

    Heimdall

    HarkonenBade/heimdall

    18 parts
  • 2 layers113.5 × 70.5 mmController2, the printed circuit board in 3D

    Controller2

    Miceuz/door-control

    An entrance to hackerspace control system

    65 partsApache-2.0
  • 2 layers93.2 × 117 mmESXAR panelize, the printed circuit board in 3D

    ESXAR panelize

    nanbuwks/ESXAR

    57 partsUnlicense

Questions

How big is the SubPCB PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SubPCB use?

69 parts, built around the TLP222AF and TLP785F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SubPCB KiCad files?

From the UnknownSP/MedalGame_GINGAAAN_PCB repository on GitHub, at the commit this page was made from: the board is PCB/SubPCB.kicad_pcb and its schematic PCB/SubPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SubPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask UnknownSP before reusing the design.