2 layers100 × 60 mm
2 layers81.3 × 63.5 mm
Powerboard
ctake1235/2024PowerBoard- Size
- 81.3 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 17
- Pads
- 101
- Tracks, vias
- 74, 82
- Pours
- 35
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Apr 2024
- Updated
- 13 Aug 2024
Overview
Powerboard is an open-source printed circuit board by ctake1235, from the ctake1235/2024PowerBoard repository on GitHub. It is a 2-layer board of 81.3 × 63.5 mm with 28 parts on 17 nets, routed with 74 tracks and 82 vias.
It is built around the PQQ10W-Q24-S5-S, TLP222AF and BZX55C9V1, with the TJ60S04M3L-VB among its other parts. Its parts include 6 resistors, 5 diodes, 3 capacitors, 3 connectors and 2 ICs.
Main components
4
PQQ10W-Q24-S5-S
SIP,22x9.5mm1 1.5kV 10W 2A 5V 88% 9V~36V SIP,22x9.5mm Isolated Power Modules ROHSCUIIsolated Power Modules
TLP222AF
DIP-41.3V 100us 2.5kV 2Ω 60V 800us One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSToshibaSolid State Relays - MOS Output (PhotoMOS)
BZX55C9V1
DO-351 Independent 100nA@6.8V 10Ω 500mW 50Ω 8.5V~9V 9.1V DO-35 Zener Diodes ROHSLGEZener Diodes
TJ60S04M3L-VB
TO-252MOSFETsVBsemi Elec
README
README.md2024PowerBoard
緊急停止基板 designed by しーたけ
- 安価で制作が容易（面実装部品は1点のみ）
- 24V/30Aに対応
- ヒューズで過電流を保護
LED説明
- BATT
- バッテリー挿入時点灯
- 作業終了時に切れていることを確認しましょう
- +5V
- 5V電源供給時に点灯
- バッテリ接続中消灯の場合DCDCに異常がある可能性があります
- SIG
- マイコンからの駆動電源オン信号（+3V3HIGH）で点灯
- 消灯の場合マイコンからの信号がありません
- PWR
- 駆動電源オン（FETオン）時に点灯
- 他LEDが正常、駆動電源オン信号で消灯の場合FETに異常があるかもしれません
- または、ヒューズが飛んでいる可能性があります
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 2 | EMER_SW | Connector_JST:JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical | J2, J3 |
| 1 | 1k8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 240R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 3557-2 | FUSE_3557:FUSE_3557-2 | F1 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | B03B | Connector_JST:JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical | J1 |
| 1 | BZX55C9V1 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D5 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C3 |
| 1 | LED_BLUE | LED_THT:LED_D3.0mm | D1 |
| 1 | LED_GREEN | LED_THT:LED_D3.0mm | D3 |
| 1 | LED_RED | LED_THT:LED_D3.0mm | D2 |
| 1 | LED_YELLOW | LED_THT:LED_D3.0mm | D4 |
| 1 | LOGO | LOGO | G*** |
| 1 | PQQ10W-Q24-S5-S | PQQ10W-Q24-S5-S:CONV_PQQ10W-Q24-S5-S | U1 |
| 1 | TJ60S04M3L | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | TLP222A | Package_DIP:DIP-4_W7.62mm | U2 |
| 1 | XT60F_OUT | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | PWR2 |
| 1 | XT60M_BATT | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | PWR1 |
Similar boards
- 2 layers65 × 56 mm
ROBOONE Auto RaspiHAT
22-soeda/ROBOONE-Auto-RaspiHAT
KiCad design for ROBOONE Automatic RaspberryPi HAT
43 parts - 2 layers101.3 × 73.7 mm
- 2 layers84 × 69 mm
Pippitank engine
garypippi/pippitank
R1 = 67kΩ (47kΩ + 20kΩ) R2 = 10kΩ (8.4V時 1.091V、6.0V時 0.779V)
82 partsMIT - 4 layers60 × 50 mm
- 2 layers218 × 98.8 mm
- 2 layers65.3 × 42.7 mm
- 2 layers110 × 60 mm
LargeMD
Tomoshibi-technology/RCJ-Japan2024-Circuit
RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発
149 parts1MIT
Questions
How big is the Powerboard PCB?
It measures 81.3 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Powerboard use?
28 parts, built around the PQQ10W-Q24-S5-S, TLP222AF, BZX55C9V1 and TJ60S04M3L-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Powerboard KiCad files?
From the ctake1235/2024PowerBoard repository on GitHub, at the commit this page was made from: the board is powerboard.kicad_pcb and its schematic powerboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Powerboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask ctake1235 before reusing the design.