2 layers132 × 94 mm
Helix niz
ginjake/ec_helix_build
商用利用したい場合は twitter @sirojake にご相談ください please contact me for commercial use. ## developer ginjake
200 parts40
2 layers65 × 56 mm
ROBOONE Auto RaspiHAT
22-soeda/ROBOONE-Auto-RaspiHATKiCad design for ROBOONE Automatic RaspberryPi HAT
- Size
- 65 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 49
- Pads
- 149
- Tracks, vias
- 158, 57
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Jun 2026
- Updated
- 26 Aug 2026
Overview
ROBOONE Auto RaspiHAT is an open-source printed circuit board by 22-soeda, from the 22-soeda/ROBOONE-Auto-RaspiHAT repository on GitHub. It is a 2-layer board of 65 × 56 mm with 43 parts on 49 nets, routed with 158 tracks and 57 vias.
It is built around the 2N7002K, 2SC2712 and TJ60S04M3L-VB. Its parts include 16 resistors, 9 connectors, 5 transistors, 3 diodes and 2 capacitors.
Main components
3Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100 | Resistor_SMD:R_0603_1608Metric | R8, R11, R13, R14, R16 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R4, R7, R12, R15 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 3 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5 |
| 2 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric | R3, R9 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | PW_motor | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J5, J7 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 2SC2712 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | AE-OKL-T | Auto_lib:AE-OKL-T | U1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | D | Diode_SMD:D_SOD-123 | D1 |
| 1 | Fan | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | M1 |
| 1 | Fan_25x25 | Auto_lib:Fan_25x25 | F |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | LED_PW | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | D3 |
| 1 | LED_RGB | Connector_JST:JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J9 |
| 1 | LED_raspi | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | D2 |
| 1 | OLED_socket | Connector_JST:JST_XH_B7B-XH-AM_1x07_P2.50mm_Vertical | J6 |
| 1 | Probe | Connector_JST:JST_ZH_B2B-ZR_1x02_P1.50mm_Vertical | J4 |
| 1 | SW_motor | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J3 |
| 1 | TJ60S04M3L | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | power+ | TestPoint:TestPoint_THTPad_D4.0mm_Drill2.0mm | J8 |
| 1 | power- | TestPoint:TestPoint_THTPad_D4.0mm_Drill2.0mm | J2 |
Similar boards
- 2 layers91 × 55 mm
- 2 layers100 × 99 mm
- 4 layers129 × 121 mm
MinyasX Combined
kunichiko/X68k-MinyasX
MinyasX は、Windows (AT互換機) 用の FDD を無改造で X68000 に接続して使えるようにするアダプタです。
232 parts2MIT - 4 layers45.2 × 47.2 mm
- 2 layers101.3 × 73.7 mm
- 2 layers81.3 × 63.5 mm
- 2 layers84 × 69 mm
Pippitank engine
garypippi/pippitank
R1 = 67kΩ (47kΩ + 20kΩ) R2 = 10kΩ (8.4V時 1.091V、6.0V時 0.779V)
82 partsMIT
Questions
How big is the ROBOONE Auto RaspiHAT PCB?
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ROBOONE Auto RaspiHAT use?
43 parts, built around the 2N7002K, 2SC2712 and TJ60S04M3L-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ROBOONE Auto RaspiHAT KiCad files?
From the 22-soeda/ROBOONE-Auto-RaspiHAT repository on GitHub, at the commit this page was made from: the board is ROBOONE-Auto-RaspiHAT.kicad_pcb and its schematic ROBOONE-Auto-RaspiHAT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ROBOONE Auto RaspiHAT design in my own project?
Its repository states no licence, so its author keeps all rights: ask 22-soeda before reusing the design.