
Helix niz
ginjake/ec_helix_build
商用利用したい場合は twitter @sirojake にご相談ください please contact me for commercial use. ## developer ginjake

Level Converters for SCSI-bus Emulators
Scsiemu is an open-source printed circuit board by novi, from the novi/scsiemu-pcb repository on GitHub. It is a 2-layer board of 100 × 99 mm with 64 parts on 127 nets, routed with 1,034 tracks and 294 vias.
It is built around the TL2218-285PW, 2SC2712 and DMG3415U. Its parts include 11 capacitors, 8 ICs, 8 connectors, 7 resistors and 4 diodes.
This device enables you to convert logic levels between SCSI-bus and Raspberry-Pi GPIOs.
NOTE: Some features are depends on your SCSI emulation software.
scsiemu-gerber/scsiemu-bom.csv| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | HDD Mount | MountingHole:MountingHole_3.5mm | MH5, MH6, MH7, MH8, MH11, MH12 |
| 6 | Raspi Mount | MountingHole:MountingHole_2.2mm_M2 | MH1, MH2, MH3, MH4, MH9, MH10 |
| 5 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5, C6, C8, C10, C11 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4 |
| 4 | 10k | Resistor_SMD:R_Cat16-8 | RN1, RN2, RN3, RN4 |
| 4 | 74LS641-1 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U1, U2, U3, U4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R4 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C9 |
| 2 | 2SC2712 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2, Q3 |
| 2 | DS2105Z | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | NFM21 0.22u | cd_device:NFM21PC | FL1, FL2 |
| 2 | POWER 5V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4, J5 |
| 2 | SBD | local_lib:D_SOD-123_HandSoldering | D1, D2 |
| 2 | TL2218-285 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U7, U8 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 2A (0685T2000-01) | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 750mA ~~ 1A (0ZCJ0075FF2E) | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | AT Power 5V (171826-4) | local_lib:Molex_171826-4 | J6 |
| 1 | AT Power 5V (641737-1) | local_lib:TE_641737-1 | J8 |
| 1 | DMG3415U | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | I2C Ext | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J7 |
| 1 | Internal Terminator | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LED ACT | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED2 |
| 1 | LED PWR | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1 |
| 1 | Power No Switch JMP | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | RasPi | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | SCSI | Connector_PinHeader_2.54mm:PinHeader_2x25_P2.54mm_Horizontal | J2 |
| 1 | USB_POWER | cd_device:USB_ZX62R-B-5P_HandSoldering | J3 |
| 1 | Use Raspi Power Off | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |

ginjake/ec_helix_build
商用利用したい場合は twitter @sirojake にご相談ください please contact me for commercial use. ## developer ginjake


kunichiko/X68k-MinyasX
MinyasX は、Windows (AT互換機) 用の FDD を無改造で X68000 に接続して使えるようにするアダプタです。

22-soeda/ROBOONE-Auto-RaspiHAT
KiCad design for ROBOONE Automatic RaspberryPi HAT


syamei0/kicad
仕様 ・圧電スピーカーは0ピン ・CANはTXDが5ピン、RXDが4ピン ・JP3とJP4はcanの終端抵抗 ・上バー付の数字はPWM可 ・白抜き文字は書き込み中プルアップ

s23c1130/CITERA_Programming_KIT
文化祭等で頒布したCITERA Programming KITの書き込み用プログラムの説明です

syamei0/Y.maku
左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応
It measures 100 × 99 mm and has 2 copper layers, 1.6 mm thick.
64 parts, built around the TL2218-285PW, 2SC2712 and DMG3415U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the novi/scsiemu-pcb repository on GitHub, at the commit this page was made from: the board is scsiemu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask novi before reusing the design.