
Power supply
syamei0/kicad
仕様 ・圧電スピーカーは0ピン ・CANはTXDが5ピン、RXDが4ピン ・JP3とJP4はcanの終端抵抗 ・上バー付の数字はPWM可 ・白抜き文字は書き込み中プルアップ

仕様 ・圧電スピーカーは0ピン ・CANはTXDが5ピン、RXDが4ピン ・JP3とJP4はcanの終端抵抗 ・上バー付の数字はPWM可 ・白抜き文字は書き込み中プルアップ
ESP32 SMD is an open-source printed circuit board by syamei0, from the syamei0/kicad repository on GitHub. It is a 2-layer board of 95 × 72 mm with 118 parts on 96 nets, routed with 547 tracks and 53 vias.
It is built around the ESP32-WROOM-32E, CH340K and FT234XD-R, with the NJM2845DL1-33-TE1, 2SC2712 and MF-R050 among its other parts. Its parts include 35 resistors, 28 diodes, 27 connectors, 9 capacitors and 4 ICs. It belongs with the ESP32 boards of this library.
power_suplly_v3.1.0
⚠注意⚠ リレーの逆起電力対策がされていません。 ダイオードを外付けして使用してください。
入力は12V
出力
12V×7(合計20Aまで)
5V×8(3.3V出力と合わせて合計1.5Aまで)
3.3V×8(合計800mAまで)
LEDの抵抗値変えたら24V入力もできるかも
その場合12V系統は無くなるけど
左下のDIPスイッチで非常停止ボタン押したときに切る系統を変更可能
パーツ
https://partscabi.net/list/3c4d911b-a046-48f9-8f62-2c7ad6c0e181
ESP32_SMD_v2.1.0
esp32-wroom-32e用の基板です。
仕様
・圧電スピーカーは0ピン
・CANはTXDが5ピン、RXDが4ピン
・JP3とJP4はcanの終端抵抗
・上バー付の数字はPWM可
・白抜き文字は書き込み中プルアップ
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 10kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +14 |
| 27 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +11 |
| 10 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J5, J6, J7, J8, J11, J12, J13, J14, J21 |
| 6 | Conn_01x03_Socket | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J15, J18, J19, J22, J23, J24 |
| 4 | 0.1μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C6 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9 |
| 2 | 240Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R30 |
| 2 | 2SC2712 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 5.1kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33, R34 |
| 2 | Conn_01x15_Socket | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J16, J20 |
| 2 | I2C | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4, J17 |
| 2 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3, JP4 |
| 2 | RJ45_Shielded | 00a:RJ45 | J25, J27 |
| 1 | 0.33μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 120Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R37 |
| 1 | 2.2μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 22μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | ATA6561 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | BOOT | 00a:DTS-63-N-V | SW2 |
| 1 | CH340K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U5 |
| 1 | EN | 00a:DTS-63-N-V | SW3 |
| 1 | ESP32-WROOM-32E | 00a:ESP32-WROOM-32E | U1 |
| 1 | FT234X | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | INPUT_1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | INPUT_2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | 00a:nuron | G*** |
| 1 | LOGO | 00a:MARC_rogo | G*** |
| 1 | MF-R050 | 00a:MF-R050 | F1 |
| 1 | NJM2845DL1-33 | 00a:TO-252-3_TabPin2 | U2 |
| 1 | PKM13EPYH4000-A0 | 00a:PKM13EPYH4000-A0 | LS1 |
| 1 | POWER(5V) | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | SW_Nidec_CAS-120A1 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J26 |
The 114 most common of 118 parts.

syamei0/kicad
仕様 ・圧電スピーカーは0ピン ・CANはTXDが5ピン、RXDが4ピン ・JP3とJP4はcanの終端抵抗 ・上バー付の数字はPWM可 ・白抜き文字は書き込み中プルアップ

syamei0/kicad
仕様 ・圧電スピーカーは0ピン ・CANはTXDが5ピン、RXDが4ピン ・JP3とJP4はcanの終端抵抗 ・上バー付の数字はPWM可 ・白抜き文字は書き込み中プルアップ

syamei0/Y.maku
左側はおまけのam2837モタドラ ### 仕様 - wifi - Bluetooth - RJ45-CAN - type-c書き込み ### ⚠注意⚠ - RJ45-書き込み非対応


hirakuni45/RX
Renesas RX Microcontroller, C++ framework, Library, Sample

Heartland-Data/esp32-mintia-sensor-kit
本リポジトリは、MINTIAケースにESP32と各種センサを組み込む試作用ファームウェアの参考実装です。




hpralfi/comfoair-esp32
ESP32-Platine, um Zehnder ComfoAir, StorkAir WHR und Wernig G90 über RS232 in Home Assistant einzubinden (ESPHome, ohne Cloud)
It measures 95 × 72 mm and has 2 copper layers, 1.6 mm thick.
118 parts, built around the ESP32-WROOM-32E, CH340K, FT234XD-R and NJM2845DL1-33-TE1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the syamei0/kicad repository on GitHub, at the commit this page was made from: the board is ESP32_SMD/ESP32_SMD.kicad_pcb and its schematic ESP32/ESP32/ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask syamei0 before reusing the design.